mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese <sr@denx.de>
218 lines
6.9 KiB
ArmAsm
218 lines
6.9 KiB
ArmAsm
/*------------------------------------------------------------------------------+
|
|
*
|
|
* This source code has been made available to you by IBM on an AS-IS
|
|
* basis. Anyone receiving this source is licensed under IBM
|
|
* copyrights to use it in any way he or she deems fit, including
|
|
* copying it, modifying it, compiling it, and redistributing it either
|
|
* with or without modifications. No license under IBM patents or
|
|
* patent applications is to be implied by the copyright license.
|
|
*
|
|
* Any user of this software should understand that IBM cannot provide
|
|
* technical support for this software and will not be responsible for
|
|
* any consequences resulting from the use of this software.
|
|
*
|
|
* Any person who transfers this source code or any derivative work
|
|
* must include the IBM copyright notice, this paragraph, and the
|
|
* preceding two paragraphs in the transferred software.
|
|
*
|
|
* COPYRIGHT I B M CORPORATION 1995
|
|
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
*-------------------------------------------------------------------------------*/
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: ext_bus_cntlr_init
|
|
* Description: Initializes the External Bus Controller for the external
|
|
* peripherals. IMPORTANT: For pass1 this code must run from
|
|
* cache since you can not reliably change a peripheral banks
|
|
* timing register (pbxap) while running code from that bank.
|
|
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
* execute the code that modifies bank 0 timings from ROM, so
|
|
* we run it from cache.
|
|
* Bank 0 - Flash or Multi Purpose Socket
|
|
* Bank 1 - Multi Purpose Socket or Flash
|
|
* Bank 2 - not used
|
|
* Bank 3 - not used
|
|
* Bank 4 - not used
|
|
* Bank 5 - not used
|
|
* Bank 6 - used to switch on the 12V for the Multipurpose socket
|
|
* Bank 7 - Config Register
|
|
*-----------------------------------------------------------------------------*/
|
|
#include <ppc4xx.h>
|
|
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
|
|
#include <configs/PIP405.h>
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
#include "pip405.h"
|
|
|
|
.globl ext_bus_cntlr_init
|
|
ext_bus_cntlr_init:
|
|
mflr r4 /* save link register */
|
|
mfdcr r3,strap /* get strapping reg */
|
|
andi. r0, r3, PSR_ROM_LOC /* mask out irrelevant bits */
|
|
bnelr /* jump back if PCI boot */
|
|
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
mtlr r4 /* restore link register */
|
|
addi r4,0,14 /* set ctr to 14; used to prefetch */
|
|
mtctr r4 /* 14 cache lines to fit this function */
|
|
/* in cache (gives us 8x14=112 instrctns) */
|
|
..ebcloop:
|
|
icbt r0,r3 /* prefetch cache line for addr in r3 */
|
|
addi r3,r3,32 /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for 14 cache lines */
|
|
|
|
/*-------------------------------------------------------------------
|
|
* Delay to ensure all accesses to ROM are complete before changing
|
|
* bank 0 timings.
|
|
*------------------------------------------------------------------- */
|
|
addis r3,0,0x0
|
|
ori r3,r3,0xA000
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* decide boot up mode
|
|
*----------------------------------------------------------------------- */
|
|
addi r4,0,pb0cr
|
|
mtdcr ebccfga,r4
|
|
mfdcr r4,ebccfgd
|
|
|
|
andi. r0, r4, 0x2000 /* mask out irrelevant bits */
|
|
beq 0f /* jump if 8 bit bus width */
|
|
|
|
/* setup 16 bit things
|
|
*-----------------------------------------------------------------------
|
|
* Memory Bank 0 (16 Bit Flash) initialization
|
|
*---------------------------------------------------------------------- */
|
|
|
|
addi r4,0,pb0ap
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,(FLASH_AP_B)@h
|
|
ori r4,r4,(FLASH_AP_B)@l
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb0cr
|
|
mtdcr ebccfga,r4
|
|
/* BS=0x010(4MB),BU=0x3(R/W), */
|
|
addis r4,0,(FLASH_CR_B)@h
|
|
ori r4,r4,(FLASH_CR_B)@l
|
|
mtdcr ebccfgd,r4
|
|
b 1f
|
|
|
|
0:
|
|
/* 8Bit boot mode: */
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 0 Multi Purpose Socket initialization
|
|
*----------------------------------------------------------------------- */
|
|
/* 0x7F8FFE80 slowest boot */
|
|
addi r4,0,pb0ap
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,(MPS_AP_B)@h
|
|
ori r4,r4,(MPS_AP_B)@l
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb0cr
|
|
mtdcr ebccfga,r4
|
|
/* BS=0x010(4MB),BU=0x3(R/W), */
|
|
addis r4,0,(MPS_CR_B)@h
|
|
ori r4,r4,(MPS_CR_B)@l
|
|
mtdcr ebccfgd,r4
|
|
|
|
|
|
1:
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 2-3-4-5-6 (not used) initialization
|
|
*-----------------------------------------------------------------------*/
|
|
addi r4,0,pb1cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb2cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb3cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb4cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb5cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb6cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
|
|
addi r4,0,pb7cr
|
|
mtdcr ebccfga,r4
|
|
addis r4,0,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr ebccfgd,r4
|
|
nop /* pass2 DCR errata #8 */
|
|
blr
|
|
|
|
#if defined(CONFIG_BOOT_PCI)
|
|
.section .bootpg,"ax"
|
|
.globl _start_pci
|
|
/*******************************************
|
|
*/
|
|
|
|
_start_pci:
|
|
/* first handle errata #68 / PCI_18 */
|
|
iccci r0, r0 /* invalidate I-cache */
|
|
lis r31, 0
|
|
mticcr r31 /* ICCR = 0 (all uncachable) */
|
|
isync
|
|
|
|
mfccr0 r28 /* set CCR0[24] = 1 */
|
|
ori r28, r28, 0x0080
|
|
mtccr0 r28
|
|
|
|
/* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
|
|
lis r28, 0xEF40
|
|
addi r28, r28, 0x0004
|
|
stw r31, 0x0C(r28) /* clear PMM0PCIHA */
|
|
lis r29, 0xFFF8 /* open 512 kByte */
|
|
addi r29, r29, 0x0001/* and enable this region */
|
|
stwbrx r29, r0, r28 /* write PMM0MA */
|
|
|
|
lis r28, 0xEEC0 /* address of PCIC0_CFGADDR */
|
|
addi r29, r28, 4 /* add 4 to r29 -> PCIC0_CFGDATA */
|
|
|
|
lis r31, 0x8000 /* set en bit bus 0 */
|
|
ori r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
|
|
stwbrx r31, r0, r28 /* write it */
|
|
|
|
lwbrx r31, r0, r29 /* load XBCS register */
|
|
oris r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
|
|
stwbrx r31, r0, r29 /* write back XBCS register */
|
|
|
|
nop
|
|
nop
|
|
b _start /* normal start */
|
|
#endif
|