mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-06 21:03:21 +09:00
![Marek Behún](/assets/img/avatar_default.png)
The DDR3 training code for Marvell A38X currently computes 1t timing when given board topology map of the Turris Omnia, but Omnia needs 2t. This patch adds support for enforcing the 2t timing in struct hws_topology_map, through a new enum hws_timing, which can assume following values: HWS_TIM_DEFAULT - default behaviour, compute whether to enable 2t from the number of CSs HWS_TIM_1T - enforce 1t HWS_TIM_2T - enforce 2t This patch also sets all the board topology maps (db-88f6820-amc, db-88f6820-gp, controlcenterdc and clearfog) to have timing set to HWS_TIM_DEFAULT. Signed-off-by: Marek Behun <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
281 lines
6.2 KiB
C
281 lines
6.2 KiB
C
/*
|
|
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
|
|
* Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <miiphy.h>
|
|
#include <tpm.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm-generic/gpio.h>
|
|
|
|
#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h"
|
|
#include "../arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h"
|
|
|
|
#include "keyprogram.h"
|
|
#include "dt_helpers.h"
|
|
#include "hydra.h"
|
|
#include "ihs_phys.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define ETH_PHY_CTRL_REG 0
|
|
#define ETH_PHY_CTRL_POWER_DOWN_BIT 11
|
|
#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT)
|
|
|
|
#define DB_GP_88F68XX_GPP_OUT_ENA_LOW 0x7fffffff
|
|
#define DB_GP_88F68XX_GPP_OUT_ENA_MID 0xffffefff
|
|
|
|
#define DB_GP_88F68XX_GPP_OUT_VAL_LOW 0x0
|
|
#define DB_GP_88F68XX_GPP_OUT_VAL_MID 0x00001000
|
|
#define DB_GP_88F68XX_GPP_POL_LOW 0x0
|
|
#define DB_GP_88F68XX_GPP_POL_MID 0x0
|
|
|
|
/*
|
|
* Define the DDR layout / topology here in the board file. This will
|
|
* be used by the DDR3 init code in the SPL U-Boot version to configure
|
|
* the DDR3 controller.
|
|
*/
|
|
static struct hws_topology_map ddr_topology_map = {
|
|
0x1, /* active interfaces */
|
|
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
|
{ { { {0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0} },
|
|
SPEED_BIN_DDR_1600K, /* speed_bin */
|
|
BUS_WIDTH_16, /* memory_width */
|
|
MEM_4G, /* mem_size */
|
|
DDR_FREQ_533, /* frequency */
|
|
0, 0, /* cas_l cas_wl */
|
|
HWS_TEMP_LOW, /* temperature */
|
|
HWS_TIM_DEFAULT} }, /* timing */
|
|
5, /* Num Of Bus Per Interface*/
|
|
BUS_MASK_32BIT /* Busses mask */
|
|
};
|
|
|
|
static struct serdes_map serdes_topology_map[] = {
|
|
{SGMII0, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
/* SATA tx polarity is inverted */
|
|
{SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 1},
|
|
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{DEFAULT_SERDES, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}
|
|
};
|
|
|
|
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
|
|
{
|
|
*serdes_map_array = serdes_topology_map;
|
|
*count = ARRAY_SIZE(serdes_topology_map);
|
|
return 0;
|
|
}
|
|
|
|
void board_pex_config(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
uint k;
|
|
struct gpio_desc gpio = {};
|
|
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 31, "fpga-program-gpio")) {
|
|
/* prepare FPGA reconfiguration */
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT);
|
|
dm_gpio_set_value(&gpio, 0);
|
|
|
|
/* give lunatic PCIe clock some time to stabilize */
|
|
mdelay(500);
|
|
|
|
/* start FPGA reconfiguration */
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_IN);
|
|
}
|
|
|
|
/* wait for FPGA done */
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 19, "fpga-done-gpio")) {
|
|
for (k = 0; k < 20; ++k) {
|
|
if (dm_gpio_get_value(&gpio)) {
|
|
printf("FPGA done after %u rounds\n", k);
|
|
break;
|
|
}
|
|
mdelay(100);
|
|
}
|
|
}
|
|
|
|
/* disable FPGA reset */
|
|
if (!request_gpio_by_name(&gpio, "gpio@18100", 6, "cpu-to-fpga-reset")) {
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT);
|
|
dm_gpio_set_value(&gpio, 1);
|
|
}
|
|
|
|
/* wait for FPGA ready */
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 27, "fpga-ready-gpio")) {
|
|
for (k = 0; k < 2; ++k) {
|
|
if (!dm_gpio_get_value(&gpio))
|
|
break;
|
|
mdelay(100);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
struct hws_topology_map *ddr3_get_topology_map(void)
|
|
{
|
|
return &ddr_topology_map;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* Configure MPP */
|
|
writel(0x00111111, MVEBU_MPP_BASE + 0x00);
|
|
writel(0x40040000, MVEBU_MPP_BASE + 0x04);
|
|
writel(0x00466444, MVEBU_MPP_BASE + 0x08);
|
|
writel(0x00043300, MVEBU_MPP_BASE + 0x0c);
|
|
writel(0x44400000, MVEBU_MPP_BASE + 0x10);
|
|
writel(0x20000334, MVEBU_MPP_BASE + 0x14);
|
|
writel(0x40000000, MVEBU_MPP_BASE + 0x18);
|
|
writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
|
|
|
|
/* Set GPP Out value */
|
|
writel(DB_GP_88F68XX_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
|
writel(DB_GP_88F68XX_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
|
|
|
/* Set GPP Polarity */
|
|
writel(DB_GP_88F68XX_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
|
writel(DB_GP_88F68XX_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
|
|
|
/* Set GPP Out Enable */
|
|
writel(DB_GP_88F68XX_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
|
writel(DB_GP_88F68XX_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Address of boot parameters */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
void init_host_phys(struct mii_dev *bus)
|
|
{
|
|
uint k;
|
|
|
|
for (k = 0; k < 2; ++k) {
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_find_by_mask(bus, 1 << k,
|
|
PHY_INTERFACE_MODE_SGMII);
|
|
|
|
if (phydev)
|
|
phy_config(phydev);
|
|
}
|
|
}
|
|
|
|
int ccdc_eth_init(void)
|
|
{
|
|
uint k;
|
|
uint octo_phy_mask = 0;
|
|
int ret;
|
|
struct mii_dev *bus;
|
|
|
|
/* Init SoC's phys */
|
|
bus = miiphy_get_dev_by_name("ethernet@34000");
|
|
|
|
if (bus)
|
|
init_host_phys(bus);
|
|
|
|
bus = miiphy_get_dev_by_name("ethernet@70000");
|
|
|
|
if (bus)
|
|
init_host_phys(bus);
|
|
|
|
/* Init octo phys */
|
|
octo_phy_mask = calculate_octo_phy_mask();
|
|
|
|
printf("IHS PHYS: %08x", octo_phy_mask);
|
|
|
|
ret = init_octo_phys(octo_phy_mask);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
printf("\n");
|
|
|
|
if (!get_fpga()) {
|
|
puts("fpga was NULL\n");
|
|
return 1;
|
|
}
|
|
|
|
/* reset all FPGA-QSGMII instances */
|
|
for (k = 0; k < 80; ++k)
|
|
writel(1 << 31, get_fpga()->qsgmii_port_state[k]);
|
|
|
|
udelay(100);
|
|
|
|
for (k = 0; k < 80; ++k)
|
|
writel(0, get_fpga()->qsgmii_port_state[k]);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
hydra_initialize();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_fix_fdt(void *rw_fdt_blob)
|
|
{
|
|
struct udevice *bus = NULL;
|
|
uint k;
|
|
char name[64];
|
|
int err;
|
|
|
|
err = uclass_get_device_by_name(UCLASS_I2C, "i2c@11000", &bus);
|
|
|
|
if (err) {
|
|
printf("Could not get I2C bus.\n");
|
|
return err;
|
|
}
|
|
|
|
for (k = 0x21; k <= 0x26; k++) {
|
|
snprintf(name, 64,
|
|
"/soc/internal-regs/i2c@11000/pca9698@%02x", k);
|
|
|
|
if (!dm_i2c_simple_probe(bus, k))
|
|
fdt_disable_by_ofname(rw_fdt_blob, name);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
ccdc_eth_init();
|
|
#endif
|
|
if (tpm_init() || tpm_startup(TPM_ST_CLEAR) ||
|
|
tpm_continue_self_test()) {
|
|
return 1;
|
|
}
|
|
|
|
mdelay(37);
|
|
|
|
flush_keys();
|
|
load_and_run_keyprog();
|
|
|
|
return 0;
|
|
}
|