mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 06:33:45 +09:00
![Ley Foon Tan](/assets/img/avatar_default.png)
Restructure the SPL so each devices such as CV, A10 and S10 will have their own dedicated SPL file. SPL file determine the HW initialization flow which is device specific Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
184 lines
4.8 KiB
C
184 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 Altera Corporation <www.altera.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pl310.h>
|
|
#include <asm/u-boot.h>
|
|
#include <asm/utils.h>
|
|
#include <image.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/system_manager.h>
|
|
#include <asm/arch/freeze_controller.h>
|
|
#include <asm/arch/clock_manager.h>
|
|
#include <asm/arch/misc.h>
|
|
#include <asm/arch/scan_manager.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <asm/arch/scu.h>
|
|
#include <asm/arch/nic301.h>
|
|
#include <asm/sections.h>
|
|
#include <fdtdec.h>
|
|
#include <watchdog.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct pl310_regs *const pl310 =
|
|
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
|
|
static struct scu_registers *scu_regs =
|
|
(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
|
|
static struct nic301_registers *nic301_regs =
|
|
(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
|
|
static const struct socfpga_system_manager *sysmgr_regs =
|
|
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
const u32 bsel = readl(&sysmgr_regs->bootinfo);
|
|
|
|
switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
|
|
case 0x1: /* FPGA (HPS2FPGA Bridge) */
|
|
return BOOT_DEVICE_RAM;
|
|
case 0x2: /* NAND Flash (1.8V) */
|
|
case 0x3: /* NAND Flash (3.0V) */
|
|
socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
|
|
return BOOT_DEVICE_NAND;
|
|
case 0x4: /* SD/MMC External Transceiver (1.8V) */
|
|
case 0x5: /* SD/MMC Internal Transceiver (3.0V) */
|
|
socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
|
|
socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
|
|
return BOOT_DEVICE_MMC1;
|
|
case 0x6: /* QSPI Flash (1.8V) */
|
|
case 0x7: /* QSPI Flash (3.0V) */
|
|
socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
|
|
return BOOT_DEVICE_SPI;
|
|
default:
|
|
printf("Invalid boot device (bsel=%08x)!\n", bsel);
|
|
hang();
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_MMC_SUPPORT
|
|
u32 spl_boot_mode(const u32 boot_device)
|
|
{
|
|
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
|
|
return MMCSD_MODE_FS;
|
|
#else
|
|
return MMCSD_MODE_RAW;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
static void socfpga_nic301_slave_ns(void)
|
|
{
|
|
writel(0x1, &nic301_regs->lwhps2fpgaregs);
|
|
writel(0x1, &nic301_regs->hps2fpgaregs);
|
|
writel(0x1, &nic301_regs->acp);
|
|
writel(0x1, &nic301_regs->rom);
|
|
writel(0x1, &nic301_regs->ocram);
|
|
writel(0x1, &nic301_regs->sdrdata);
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
const struct cm_config *cm_default_cfg = cm_get_default_config();
|
|
unsigned long sdram_size;
|
|
unsigned long reg;
|
|
|
|
/*
|
|
* First C code to run. Clear fake OCRAM ECC first as SBE
|
|
* and DBE might triggered during power on
|
|
*/
|
|
reg = readl(&sysmgr_regs->eccgrp_ocram);
|
|
if (reg & SYSMGR_ECC_OCRAM_SERR)
|
|
writel(SYSMGR_ECC_OCRAM_SERR | SYSMGR_ECC_OCRAM_EN,
|
|
&sysmgr_regs->eccgrp_ocram);
|
|
if (reg & SYSMGR_ECC_OCRAM_DERR)
|
|
writel(SYSMGR_ECC_OCRAM_DERR | SYSMGR_ECC_OCRAM_EN,
|
|
&sysmgr_regs->eccgrp_ocram);
|
|
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
socfpga_nic301_slave_ns();
|
|
|
|
/* Configure ARM MPU SNSAC register. */
|
|
setbits_le32(&scu_regs->sacr, 0xfff);
|
|
|
|
/* Remap SDRAM to 0x0 */
|
|
writel(0x1, &nic301_regs->remap); /* remap.mpuzero */
|
|
writel(0x1, &pl310->pl310_addr_filter_start);
|
|
|
|
debug("Freezing all I/O banks\n");
|
|
/* freeze all IO banks */
|
|
sys_mgr_frzctrl_freeze_req();
|
|
|
|
/* Put everything into reset but L4WD0. */
|
|
socfpga_per_reset_all();
|
|
/* Put FPGA bridges into reset too. */
|
|
socfpga_bridges_reset(1);
|
|
|
|
socfpga_per_reset(SOCFPGA_RESET(SDR), 0);
|
|
socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
|
|
socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
|
|
|
|
timer_init();
|
|
|
|
debug("Reconfigure Clock Manager\n");
|
|
/* reconfigure the PLLs */
|
|
if (cm_basic_init(cm_default_cfg))
|
|
hang();
|
|
|
|
/* Enable bootrom to configure IOs. */
|
|
sysmgr_config_warmrstcfgio(1);
|
|
|
|
/* configure the IOCSR / IO buffer settings */
|
|
if (scan_mgr_configure_iocsr())
|
|
hang();
|
|
|
|
sysmgr_config_warmrstcfgio(0);
|
|
|
|
/* configure the pin muxing through system manager */
|
|
sysmgr_config_warmrstcfgio(1);
|
|
sysmgr_pinmux_init();
|
|
sysmgr_config_warmrstcfgio(0);
|
|
|
|
/* De-assert reset for peripherals and bridges based on handoff */
|
|
reset_deassert_peripherals_handoff();
|
|
socfpga_bridges_reset(0);
|
|
|
|
debug("Unfreezing/Thaw all I/O banks\n");
|
|
/* unfreeze / thaw all IO banks */
|
|
sys_mgr_frzctrl_thaw_req();
|
|
|
|
/* enable console uart printing */
|
|
preloader_console_init();
|
|
|
|
if (sdram_mmr_init_full(0xffffffff) != 0) {
|
|
puts("SDRAM init failed.\n");
|
|
hang();
|
|
}
|
|
|
|
debug("SDRAM: Calibrating PHY\n");
|
|
/* SDRAM calibration */
|
|
if (sdram_calibration_full() == 0) {
|
|
puts("SDRAM calibration failed.\n");
|
|
hang();
|
|
}
|
|
|
|
sdram_size = sdram_calculate_size();
|
|
debug("SDRAM: %ld MiB\n", sdram_size >> 20);
|
|
|
|
/* Sanity check ensure correct SDRAM size specified */
|
|
if (get_ram_size(0, sdram_size) != sdram_size) {
|
|
puts("SDRAM size check failed!\n");
|
|
hang();
|
|
}
|
|
|
|
socfpga_bridges_reset(1);
|
|
|
|
/* Configure simple malloc base pointer into RAM. */
|
|
gd->malloc_base = CONFIG_SYS_TEXT_BASE + (1024 * 1024);
|
|
}
|