mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Kim Phillips](/assets/img/avatar_default.png)
Configuring for MPC8360EMDS_66_HOST_33 - Board: MPC8360EMDS, Options: CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1 mpc8360emds.c: In function 'board_eth_init': mpc8360emds.c:178:12: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
458 lines
12 KiB
C
458 lines
12 KiB
C
/*
|
|
* Copyright (C) 2006,2010-2011 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#if defined(CONFIG_PCI)
|
|
#include <pci.h>
|
|
#endif
|
|
#include <spd_sdram.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_enet.h>
|
|
#include <asm/mmu.h>
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
#include <hwconfig.h>
|
|
#include <fdt_support.h>
|
|
#if defined(CONFIG_PQ_MDS_PIB)
|
|
#include "../common/pq-mds-pib.h"
|
|
#endif
|
|
#include "../../../drivers/qe/uec.h"
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* GETH1 */
|
|
{0, 3, 1, 0, 1}, /* TxD0 */
|
|
{0, 4, 1, 0, 1}, /* TxD1 */
|
|
{0, 5, 1, 0, 1}, /* TxD2 */
|
|
{0, 6, 1, 0, 1}, /* TxD3 */
|
|
{1, 6, 1, 0, 3}, /* TxD4 */
|
|
{1, 7, 1, 0, 1}, /* TxD5 */
|
|
{1, 9, 1, 0, 2}, /* TxD6 */
|
|
{1, 10, 1, 0, 2}, /* TxD7 */
|
|
{0, 9, 2, 0, 1}, /* RxD0 */
|
|
{0, 10, 2, 0, 1}, /* RxD1 */
|
|
{0, 11, 2, 0, 1}, /* RxD2 */
|
|
{0, 12, 2, 0, 1}, /* RxD3 */
|
|
{0, 13, 2, 0, 1}, /* RxD4 */
|
|
{1, 1, 2, 0, 2}, /* RxD5 */
|
|
{1, 0, 2, 0, 2}, /* RxD6 */
|
|
{1, 4, 2, 0, 2}, /* RxD7 */
|
|
{0, 7, 1, 0, 1}, /* TX_EN */
|
|
{0, 8, 1, 0, 1}, /* TX_ER */
|
|
{0, 15, 2, 0, 1}, /* RX_DV */
|
|
{0, 16, 2, 0, 1}, /* RX_ER */
|
|
{0, 0, 2, 0, 1}, /* RX_CLK */
|
|
{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
|
|
{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
|
|
/* GETH2 */
|
|
{0, 17, 1, 0, 1}, /* TxD0 */
|
|
{0, 18, 1, 0, 1}, /* TxD1 */
|
|
{0, 19, 1, 0, 1}, /* TxD2 */
|
|
{0, 20, 1, 0, 1}, /* TxD3 */
|
|
{1, 2, 1, 0, 1}, /* TxD4 */
|
|
{1, 3, 1, 0, 2}, /* TxD5 */
|
|
{1, 5, 1, 0, 3}, /* TxD6 */
|
|
{1, 8, 1, 0, 3}, /* TxD7 */
|
|
{0, 23, 2, 0, 1}, /* RxD0 */
|
|
{0, 24, 2, 0, 1}, /* RxD1 */
|
|
{0, 25, 2, 0, 1}, /* RxD2 */
|
|
{0, 26, 2, 0, 1}, /* RxD3 */
|
|
{0, 27, 2, 0, 1}, /* RxD4 */
|
|
{1, 12, 2, 0, 2}, /* RxD5 */
|
|
{1, 13, 2, 0, 3}, /* RxD6 */
|
|
{1, 11, 2, 0, 2}, /* RxD7 */
|
|
{0, 21, 1, 0, 1}, /* TX_EN */
|
|
{0, 22, 1, 0, 1}, /* TX_ER */
|
|
{0, 29, 2, 0, 1}, /* RX_DV */
|
|
{0, 30, 2, 0, 1}, /* RX_ER */
|
|
{0, 31, 2, 0, 1}, /* RX_CLK */
|
|
{2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */
|
|
{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
|
|
|
|
{0, 1, 3, 0, 2}, /* MDIO */
|
|
{0, 2, 1, 0, 1}, /* MDC */
|
|
|
|
{5, 0, 1, 0, 2}, /* UART2_SOUT */
|
|
{5, 1, 2, 0, 3}, /* UART2_CTS */
|
|
{5, 2, 1, 0, 1}, /* UART2_RTS */
|
|
{5, 3, 2, 0, 2}, /* UART2_SIN */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
|
};
|
|
|
|
/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */
|
|
static int board_handle_erratum2(void)
|
|
{
|
|
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
|
|
return REVID_MAJOR(immr->sysconf.spridr) == 2 &&
|
|
REVID_MINOR(immr->sysconf.spridr) == 1;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
|
|
|
|
/* Enable flash write */
|
|
bcsr[0xa] &= ~0x04;
|
|
|
|
/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
|
|
if (REVID_MAJOR(immr->sysconf.spridr) == 2)
|
|
bcsr[0xe] = 0x30;
|
|
|
|
/* Enable second UART */
|
|
bcsr[0x9] &= ~0x01;
|
|
|
|
if (board_handle_erratum2()) {
|
|
void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8);
|
|
|
|
/*
|
|
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
|
|
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
|
|
*/
|
|
setbits_be32(immap, 0x0c003000);
|
|
|
|
/*
|
|
* IMMR + 0x14AC[20:27] = 10101010
|
|
* (data delay for both UCC's)
|
|
*/
|
|
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
gd_t *gd;
|
|
#ifdef CONFIG_PQ_MDS_PIB
|
|
pib_init();
|
|
#endif
|
|
/*
|
|
* BAT6 is used for SDRAM when DDR size is 512MB or larger than 256MB
|
|
* So re-setup PCI MEM space used BAT5 after relocated to DDR
|
|
*/
|
|
gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
|
|
if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
|
|
write_bat(DBAT5, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
|
|
write_bat(IBAT5, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_UEC_ETH
|
|
static uec_info_t uec_info[] = {
|
|
#ifdef CONFIG_UEC_ETH1
|
|
STD_UEC_INFO(1),
|
|
#endif
|
|
#ifdef CONFIG_UEC_ETH2
|
|
STD_UEC_INFO(2),
|
|
#endif
|
|
};
|
|
|
|
int board_eth_init(bd_t *bd)
|
|
{
|
|
if (board_handle_erratum2()) {
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(uec_info); i++) {
|
|
uec_info[i].enet_interface_type =
|
|
PHY_INTERFACE_MODE_RGMII_RXID;
|
|
uec_info[i].speed = SPEED_1000;
|
|
}
|
|
}
|
|
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
|
|
}
|
|
#endif /* CONFIG_UEC_ETH */
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
int fixed_sdram(void);
|
|
static int sdram_init(unsigned int base);
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
u32 lbc_sdram_size;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
|
return -1;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
msize = spd_sdram();
|
|
#else
|
|
msize = fixed_sdram();
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize DDR ECC byte
|
|
*/
|
|
ddr_enable_ecc(msize * 1024 * 1024);
|
|
#endif
|
|
/*
|
|
* Initialize SDRAM if it is on local bus.
|
|
*/
|
|
lbc_sdram_size = sdram_init(msize * 1024 * 1024);
|
|
if (!msize)
|
|
msize = lbc_sdram_size;
|
|
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
return (msize * 1024 * 1024);
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = CONFIG_SYS_DDR_SIZE;
|
|
u32 ddr_size = msize << 20;
|
|
u32 ddr_size_log2 = __ilog2(ddr_size);
|
|
u32 half_ddr_size = ddr_size >> 1;
|
|
|
|
im->sysconf.ddrlaw[0].bar =
|
|
CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
|
|
im->sysconf.ddrlaw[0].ar =
|
|
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
#if (CONFIG_SYS_DDR_SIZE != 256)
|
|
#warning Currenly any ddr size other than 256 is not supported
|
|
#endif
|
|
#ifdef CONFIG_DDR_II
|
|
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
|
|
#else
|
|
|
|
#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
|
|
#warning Chip select bounds is only configurable in 16MB increments
|
|
#endif
|
|
im->ddr.csbnds[0].csbnds =
|
|
((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
|
(((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size - 1) >>
|
|
CSBNDS_EA_SHIFT) & CSBNDS_EA);
|
|
im->ddr.csbnds[1].csbnds =
|
|
(((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size) >>
|
|
CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
|
(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
|
|
CSBNDS_EA_SHIFT) & CSBNDS_EA);
|
|
|
|
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
im->ddr.cs_config[1] = CONFIG_SYS_DDR_CS1_CONFIG;
|
|
|
|
im->ddr.cs_config[2] = 0;
|
|
im->ddr.cs_config[3] = 0;
|
|
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
|
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
#endif
|
|
udelay(200);
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
|
|
return msize;
|
|
}
|
|
#endif /*!CONFIG_SYS_SPD_EEPROM */
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Freescale MPC8360EMDS\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if MPC8360EMDS is soldered with SDRAM
|
|
*/
|
|
#ifdef CONFIG_SYS_LB_SDRAM
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
|
|
static int sdram_init(unsigned int base)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
|
|
int rem = base % sdram_size;
|
|
uint *sdram_addr;
|
|
|
|
/* window base address should be aligned to the window size */
|
|
if (rem)
|
|
base = base - rem + sdram_size;
|
|
|
|
/*
|
|
* Setup BAT6 for SDRAM when DDR size is 512MB or larger than 256MB
|
|
* After relocated to DDR, reuse BAT5 for PCI MEM space
|
|
*/
|
|
if (base > CONFIG_MAX_MEM_MAPPED) {
|
|
unsigned long batl = base | BATL_PP_10 | BATL_MEMCOHERENCE;
|
|
unsigned long batu = base | BATU_BL_64M | BATU_VS | BATU_VP;
|
|
|
|
/* Setup the BAT6 for SDRAM */
|
|
write_bat(DBAT6, batu, batl);
|
|
write_bat(IBAT6, batu, batl);
|
|
}
|
|
|
|
sdram_addr = (uint *)base;
|
|
/*
|
|
* Setup SDRAM Base and Option Registers
|
|
*/
|
|
set_lbc_br(2, base | CONFIG_SYS_BR2);
|
|
set_lbc_or(2, CONFIG_SYS_OR2);
|
|
immap->sysconf.lblaw[2].bar = base;
|
|
immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
|
|
|
|
/*setup mtrpt, lsrt and lbcr for LB bus */
|
|
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
|
|
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
|
|
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
|
|
asm("sync");
|
|
|
|
/*
|
|
* Configure the SDRAM controller Machine Mode Register.
|
|
*/
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* Normal Operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* Precharge All Banks */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/*
|
|
* We need do 8 times auto refresh operation.
|
|
*/
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
|
|
asm("sync");
|
|
*sdram_addr = 0xff; /* 1 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 2 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 3 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 4 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 5 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 6 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 7 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 8 times */
|
|
udelay(100);
|
|
|
|
/* Mode register write operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
|
|
asm("sync");
|
|
*(sdram_addr + 0xcc) = 0xff;
|
|
udelay(100);
|
|
|
|
/* Normal operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/*
|
|
* In non-aligned case we don't [normally] use that memory because
|
|
* there is a hole.
|
|
*/
|
|
if (rem)
|
|
return 0;
|
|
return CONFIG_SYS_LBC_SDRAM_SIZE;
|
|
}
|
|
#else
|
|
static int sdram_init(unsigned int base) { return 0; }
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
|
|
{
|
|
if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
|
|
return;
|
|
|
|
do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
|
|
"peripheral", sizeof("peripheral"), 1);
|
|
}
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
ft_board_fixup_qe_usb(blob, bd);
|
|
/*
|
|
* mpc8360ea pb mds errata 2: RGMII timing
|
|
* if on mpc8360ea rev. 2.1,
|
|
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
|
|
*/
|
|
if (board_handle_erratum2()) {
|
|
int nodeoffset;
|
|
const char *prop;
|
|
int path;
|
|
|
|
nodeoffset = fdt_path_offset(blob, "/aliases");
|
|
if (nodeoffset >= 0) {
|
|
#if defined(CONFIG_HAS_ETH0)
|
|
/* fixup UCC 1 if using rgmii-id mode */
|
|
prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
|
|
if (prop) {
|
|
path = fdt_path_offset(blob, prop);
|
|
prop = fdt_getprop(blob, path,
|
|
"phy-connection-type", 0);
|
|
if (prop && (strcmp(prop, "rgmii-id") == 0))
|
|
fdt_fixup_phy_connection(blob, path,
|
|
PHY_INTERFACE_MODE_RGMII_RXID);
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_HAS_ETH1)
|
|
/* fixup UCC 2 if using rgmii-id mode */
|
|
prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
|
|
if (prop) {
|
|
path = fdt_path_offset(blob, prop);
|
|
prop = fdt_getprop(blob, path,
|
|
"phy-connection-type", 0);
|
|
if (prop && (strcmp(prop, "rgmii-id") == 0))
|
|
fdt_fixup_phy_connection(blob, path,
|
|
PHY_INTERFACE_MODE_RGMII_RXID);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
#endif
|