mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 06:18:51 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
151 lines
3.7 KiB
C
151 lines
3.7 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Eastman Kodak Company, <www.kodak.com>
|
|
* Michael Zaidman, <michael.zaidman@kodak.com>
|
|
*
|
|
* The code is based on the cpu/mpc83xx/ecc.c written by
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc83xx.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <post.h>
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_ECC
|
|
/*
|
|
* We use the RAW I/O accessors where possible in order to
|
|
* achieve performance goal, since the test's execution time
|
|
* affects the board start up time.
|
|
*/
|
|
static inline void ecc_clear(ddr83xx_t *ddr)
|
|
{
|
|
/* Clear capture registers */
|
|
__raw_writel(0, &ddr->capture_address);
|
|
__raw_writel(0, &ddr->capture_data_hi);
|
|
__raw_writel(0, &ddr->capture_data_lo);
|
|
__raw_writel(0, &ddr->capture_ecc);
|
|
__raw_writel(0, &ddr->capture_attributes);
|
|
|
|
/* Clear SBEC and set SBET to 1 */
|
|
out_be32(&ddr->err_sbe, 1 << ECC_ERROR_MAN_SBET_SHIFT);
|
|
|
|
/* Clear Error Detect register */
|
|
out_be32(&ddr->err_detect, ECC_ERROR_DETECT_MME |\
|
|
ECC_ERROR_DETECT_MBE |\
|
|
ECC_ERROR_DETECT_SBE |\
|
|
ECC_ERROR_DETECT_MSE);
|
|
|
|
isync();
|
|
}
|
|
|
|
int ecc_post_test(int flags)
|
|
{
|
|
int ret = 0;
|
|
int int_state;
|
|
int errbit;
|
|
u32 pattern[2], writeback[2], retval[2];
|
|
ddr83xx_t *ddr = &((immap_t *)CONFIG_SYS_IMMR)->ddr;
|
|
volatile u64 *addr = (u64 *)CONFIG_SYS_POST_ECC_START_ADDR;
|
|
|
|
/* The pattern is written into memory to generate error */
|
|
pattern[0] = 0xfedcba98UL;
|
|
pattern[1] = 0x76543210UL;
|
|
|
|
/* After injecting error, re-initialize the memory with the value */
|
|
writeback[0] = ~pattern[0];
|
|
writeback[1] = ~pattern[1];
|
|
|
|
/* Check if ECC is enabled */
|
|
if (__raw_readl(&ddr->err_disable) & ECC_ERROR_ENABLE) {
|
|
debug("DDR's ECC is not enabled, skipping the ECC POST.\n");
|
|
return 0;
|
|
}
|
|
|
|
int_state = disable_interrupts();
|
|
icache_enable();
|
|
|
|
#ifdef CONFIG_DDR_32BIT
|
|
/* It seems like no one really uses the CONFIG_DDR_32BIT mode */
|
|
#error "Add ECC POST support for CONFIG_DDR_32BIT here!"
|
|
#else
|
|
for (addr = (u64*)CONFIG_SYS_POST_ECC_START_ADDR, errbit=0;
|
|
addr < (u64*)CONFIG_SYS_POST_ECC_STOP_ADDR; addr++, errbit++ ) {
|
|
|
|
WATCHDOG_RESET();
|
|
|
|
ecc_clear(ddr);
|
|
|
|
/* Enable error injection */
|
|
setbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
|
|
sync();
|
|
isync();
|
|
|
|
/* Set bit to be injected */
|
|
if (errbit < 32) {
|
|
__raw_writel(1 << errbit, &ddr->data_err_inject_lo);
|
|
__raw_writel(0, &ddr->data_err_inject_hi);
|
|
} else {
|
|
__raw_writel(0, &ddr->data_err_inject_lo);
|
|
__raw_writel(1<<(errbit-32), &ddr->data_err_inject_hi);
|
|
}
|
|
sync();
|
|
isync();
|
|
|
|
/* Write memory location injecting SBE */
|
|
ppcDWstore((u32*)addr, pattern);
|
|
sync();
|
|
|
|
/* Disable error injection */
|
|
clrbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
|
|
sync();
|
|
isync();
|
|
|
|
/* Data read should generate SBE */
|
|
ppcDWload((u32*)addr, retval);
|
|
sync();
|
|
|
|
if (!(__raw_readl(&ddr->err_detect) & ECC_ERROR_DETECT_SBE) ||
|
|
(__raw_readl(&ddr->data_err_inject_hi) !=
|
|
(__raw_readl(&ddr->capture_data_hi) ^ pattern[0])) ||
|
|
(__raw_readl(&ddr->data_err_inject_lo) !=
|
|
(__raw_readl(&ddr->capture_data_lo) ^ pattern[1]))) {
|
|
|
|
post_log("ECC failed to detect SBE error at %08x, "
|
|
"SBE injection mask %08x-%08x, wrote "
|
|
"%08x-%08x, read %08x-%08x\n", addr,
|
|
ddr->data_err_inject_hi,
|
|
ddr->data_err_inject_lo,
|
|
pattern[0], pattern[1],
|
|
retval[0], retval[1]);
|
|
|
|
printf("ERR_DETECT Reg: %08x\n", ddr->err_detect);
|
|
printf("ECC CAPTURE_DATA Reg: %08x-%08x\n",
|
|
ddr->capture_data_hi, ddr->capture_data_lo);
|
|
ret = 1;
|
|
break;
|
|
}
|
|
|
|
/* Re-initialize the ECC memory */
|
|
ppcDWstore((u32*)addr, writeback);
|
|
sync();
|
|
isync();
|
|
|
|
errbit %= 63;
|
|
}
|
|
#endif /* !CONFIG_DDR_32BIT */
|
|
|
|
ecc_clear(ddr);
|
|
|
|
icache_disable();
|
|
|
|
if (int_state)
|
|
enable_interrupts();
|
|
|
|
return ret;
|
|
}
|
|
#endif
|