..
arm_pl180_mmci.c
arm_pl180_mmci.h
bcm2835_sdhci.c
mmc: bcm2835_sdhci: add missing include
2014-10-25 15:27:35 -04:00
bfin_sdh.c
mmc: set correct block size value in bfin sdh driver
2014-10-03 17:26:49 +03:00
davinci_mmc.c
dw_mmc.c
mmc: dw_mmc: fixed the wrong bit control
2015-02-23 19:35:13 +02:00
exynos_dw_mmc.c
mmc: exynos dwmmc: check boot mode before init dwmmc
2015-02-23 19:49:22 +02:00
fsl_esdhc_spl.c
fsl_esdhc.c
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2014-11-26 11:22:29 -05:00
ftsdc010_mci.c
ftsdc021_sdhci.c
gen_atmel_mci.c
MMC: atmel_mci: enable high speed mode support
2014-08-01 20:01:33 +03:00
Kconfig
mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC
2015-01-19 16:24:25 +02:00
kona_sdhci.c
Makefile
x86: mmc: Move common FSP functions into a common file
2015-02-06 12:07:36 -07:00
mmc_private.h
mmc_spi.c
mmc_write.c
mmc.c
mmc: print SD/eMMC type for inited mmc devices
2015-02-23 19:49:49 +02:00
mv_sdhci.c
mvebu_mmc.c
MVEBUMMC : REMOVE unnecessary delay from init
2015-01-06 10:10:28 +02:00
mxcmmc.c
mxsmmc.c
omap_hsmmc.c
omap3: mmc: add 1.8v bias setting for MMC1
2015-01-29 12:00:50 -05:00
pci_mmc.c
x86: mmc: Move common FSP functions into a common file
2015-02-06 12:07:36 -07:00
pxa_mmc_gen.c
linux/kernel.h: sync min, max, min3, max3 macros with Linux
2014-11-23 06:48:30 -05:00
rpmb.c
s3c_sdi.c
mmc: s3c: Add SD driver
2014-08-01 19:24:34 +03:00
s5p_sdhci.c
dm: mmc: Remove use of fdtdec GPIO support
2015-01-29 17:09:52 -07:00
sdhci.c
mmc: sdhci: fix bus width switching on Samsung SoCs
2015-02-23 19:52:00 +02:00
sh_mmcif.c
mmc: sh_mmcif: Add support rmobile
2014-12-05 11:16:22 +09:00
sh_mmcif.h
mmc: sh_mmcif: Add support rmobile
2014-12-05 11:16:22 +09:00
sh_sdhi.c
mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC
2015-01-19 16:24:25 +02:00
socfpga_dw_mmc.c
arm: socfpga: mmc: Pick the clock from clock manager
2014-10-06 17:46:49 +02:00
spear_sdhci.c
sunxi_mmc.c
sunxi: mmc: Always declare High Capacity capability
2015-02-23 19:46:13 +02:00
tegra_mmc.c
dm: mmc: Remove use of fdtdec GPIO support
2015-01-29 17:09:52 -07:00
zynq_sdhci.c
mmc: zynq: Use phys_addr_t for addresses
2015-01-21 10:30:43 +01:00