mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Mike Frysinger](/assets/img/avatar_default.png)
All of the duplicated code for Blackfin processors and boot modes have been unified. After all, the core is the same for all processors, just the peripheral set differs (which gets handled in the drivers). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
390 lines
8.8 KiB
C
390 lines
8.8 KiB
C
/*
|
|
* U-boot - BF537.c
|
|
*
|
|
* Copyright (c) 2005-2007 Analog Devices Inc.
|
|
*
|
|
* (C) Copyright 2000-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <command.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/io.h>
|
|
#include <net.h>
|
|
#include <asm/mach-common/bits/bootrom.h>
|
|
|
|
/**
|
|
* is_valid_ether_addr - Determine if the given Ethernet address is valid
|
|
* @addr: Pointer to a six-byte array containing the Ethernet address
|
|
*
|
|
* Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
|
|
* a multicast address, and is not FF:FF:FF:FF:FF:FF.
|
|
*
|
|
* Return true if the address is valid.
|
|
*/
|
|
static inline int is_valid_ether_addr(const u8 * addr)
|
|
{
|
|
/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
|
|
* explicitly check for it here. */
|
|
return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
|
|
}
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define POST_WORD_ADDR 0xFF903FFC
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: ADI BF537 stamp board\n");
|
|
printf(" Support: http://blackfin.uclinux.org/\n");
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_BFIN_IDE)
|
|
|
|
void cf_outb(unsigned char val, volatile unsigned char *addr)
|
|
{
|
|
*(addr) = val;
|
|
SSYNC();
|
|
}
|
|
|
|
unsigned char cf_inb(volatile unsigned char *addr)
|
|
{
|
|
volatile unsigned char c;
|
|
|
|
c = *(addr);
|
|
SSYNC();
|
|
|
|
return c;
|
|
}
|
|
|
|
void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < words; i++)
|
|
*(sect_buf + i) = *(addr);
|
|
SSYNC();
|
|
}
|
|
|
|
void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < words; i++)
|
|
*(addr) = *(sect_buf + i);
|
|
SSYNC();
|
|
}
|
|
#endif /* CONFIG_BFIN_IDE */
|
|
|
|
long int initdram(int board_type)
|
|
{
|
|
#ifdef DEBUG
|
|
int brate;
|
|
char *tmp = getenv("baudrate");
|
|
brate = simple_strtoul(tmp, NULL, 16);
|
|
printf("Serial Port initialized with Baud rate = %x\n", brate);
|
|
printf("SDRAM attributes:\n");
|
|
printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
|
|
"tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
|
|
3, 3, 6, 2, 3);
|
|
printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
|
|
printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
|
|
#endif
|
|
gd->bd->bi_memstart = CFG_SDRAM_BASE;
|
|
gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
|
|
return CFG_MAX_RAM_SIZE;
|
|
}
|
|
|
|
#if defined(CONFIG_MISC_INIT_R)
|
|
/* miscellaneous platform dependent initialisations */
|
|
int misc_init_r(void)
|
|
{
|
|
#if defined(CONFIG_CMD_NET)
|
|
char nid[32];
|
|
unsigned char *pMACaddr = (unsigned char *)0x203F0000;
|
|
|
|
/* The 0xFF check here is to make sure we don't use the address
|
|
* in flash if it's simply been erased (aka all 0xFF values) */
|
|
if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) {
|
|
sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x",
|
|
pMACaddr[0], pMACaddr[1],
|
|
pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
|
|
setenv("ethaddr", nid);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_IDE)
|
|
#if defined(CONFIG_BFIN_TRUE_IDE)
|
|
/* Enable ATASEL when in True IDE mode */
|
|
printf("Using CF True IDE Mode\n");
|
|
cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA);
|
|
udelay(1000);
|
|
#elif defined(CONFIG_BFIN_CF_IDE)
|
|
/* Disable ATASEL when we're in Common Memory Mode */
|
|
printf("Using CF Common Memory Mode\n");
|
|
cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS);
|
|
udelay(1000);
|
|
#elif defined(CONFIG_BFIN_HDD_IDE)
|
|
printf("Using HDD IDE Mode\n");
|
|
#endif
|
|
ide_init();
|
|
#endif /* CONFIG_BFIN_IDE */
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MISC_INIT_R */
|
|
|
|
#ifdef CONFIG_POST
|
|
/* Using sw10-PF5 as the hotkey */
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
int delay = 3;
|
|
int i;
|
|
unsigned short value;
|
|
|
|
*pPORTF_FER &= ~PF5;
|
|
*pPORTFIO_DIR &= ~PF5;
|
|
*pPORTFIO_INEN |= PF5;
|
|
|
|
printf("########Press SW10 to enter Memory POST########: %2d ", delay);
|
|
while (delay--) {
|
|
for (i = 0; i < 100; i++) {
|
|
value = *pPORTFIO & PF5;
|
|
if (value != 0) {
|
|
break;
|
|
}
|
|
udelay(10000);
|
|
}
|
|
printf("\b\b\b%2d ", delay);
|
|
}
|
|
printf("\b\b\b 0");
|
|
printf("\n");
|
|
if (value == 0)
|
|
return 0;
|
|
else {
|
|
printf("Hotkey has been pressed, Enter POST . . . . . .\n");
|
|
return 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
|
|
void post_word_store(ulong a)
|
|
{
|
|
volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
|
|
*save_addr = a;
|
|
}
|
|
|
|
ulong post_word_load(void)
|
|
{
|
|
volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
|
|
return *save_addr;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_POST
|
|
int uart_post_test(int flags)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#define BLOCK_SIZE 0x10000
|
|
#define VERIFY_ADDR 0x2000000
|
|
extern int erase_block_flash(int);
|
|
extern int write_data(long lStart, long lCount, uchar * pnData);
|
|
int flash_post_test(int flags)
|
|
{
|
|
unsigned short *pbuf, *temp;
|
|
int offset, n, i;
|
|
int value = 0;
|
|
int result = 0;
|
|
printf("\n");
|
|
pbuf = (unsigned short *)VERIFY_ADDR;
|
|
temp = pbuf;
|
|
for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
|
|
offset = (n - 7) * BLOCK_SIZE;
|
|
printf("--------Erase block:%2d..", n);
|
|
erase_block_flash(n);
|
|
printf("OK\r");
|
|
printf("--------Program block:%2d...", n);
|
|
write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
|
|
printf("OK\r");
|
|
printf("--------Verify block:%2d...", n);
|
|
for (i = 0; i < BLOCK_SIZE; i += 2) {
|
|
if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) !=
|
|
*temp++) {
|
|
value = 1;
|
|
result = 1;
|
|
}
|
|
}
|
|
if (value)
|
|
printf("failed\n");
|
|
else
|
|
printf("OK %3d%%\r",
|
|
(int)(
|
|
(n + 1 -
|
|
FLASH_START_POST_BLOCK) *
|
|
100 / (FLASH_END_POST_BLOCK -
|
|
FLASH_START_POST_BLOCK)));
|
|
|
|
temp = pbuf;
|
|
value = 0;
|
|
}
|
|
printf("\n");
|
|
if (result)
|
|
return -1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/****************************************************
|
|
* LED1 ---- PF6 LED2 ---- PF7 *
|
|
* LED3 ---- PF8 LED4 ---- PF9 *
|
|
* LED5 ---- PF10 LED6 ---- PF11 *
|
|
****************************************************/
|
|
int led_post_test(int flags)
|
|
{
|
|
*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
|
|
*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
|
|
*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
|
|
*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
|
|
udelay(1000000);
|
|
printf("LED1 on");
|
|
*pPORTFIO |= PF6;
|
|
udelay(1000000);
|
|
printf("\b\b\b\b\b\b\b");
|
|
printf("LED2 on");
|
|
*pPORTFIO |= PF7;
|
|
udelay(1000000);
|
|
printf("\b\b\b\b\b\b\b");
|
|
printf("LED3 on");
|
|
*pPORTFIO |= PF8;
|
|
udelay(1000000);
|
|
printf("\b\b\b\b\b\b\b");
|
|
printf("LED4 on");
|
|
*pPORTFIO |= PF9;
|
|
udelay(1000000);
|
|
printf("\b\b\b\b\b\b\b");
|
|
printf("LED5 on");
|
|
*pPORTFIO |= PF10;
|
|
udelay(1000000);
|
|
printf("\b\b\b\b\b\b\b");
|
|
printf("lED6 on");
|
|
*pPORTFIO |= PF11;
|
|
printf("\b\b\b\b\b\b\b ");
|
|
return 0;
|
|
}
|
|
|
|
/************************************************
|
|
* SW10 ---- PF5 SW11 ---- PF4 *
|
|
* SW12 ---- PF3 SW13 ---- PF2 *
|
|
************************************************/
|
|
int button_post_test(int flags)
|
|
{
|
|
int i, delay = 5;
|
|
unsigned short value = 0;
|
|
int result = 0;
|
|
|
|
*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
|
|
*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
|
|
*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
|
|
|
|
printf("\n--------Press SW10: %2d ", delay);
|
|
while (delay--) {
|
|
for (i = 0; i < 100; i++) {
|
|
value = *pPORTFIO & PF5;
|
|
if (value != 0) {
|
|
break;
|
|
}
|
|
udelay(10000);
|
|
}
|
|
printf("\b\b\b%2d ", delay);
|
|
}
|
|
if (value != 0)
|
|
printf("\b\bOK");
|
|
else {
|
|
result = -1;
|
|
printf("\b\bfailed");
|
|
}
|
|
|
|
delay = 5;
|
|
printf("\n--------Press SW11: %2d ", delay);
|
|
while (delay--) {
|
|
for (i = 0; i < 100; i++) {
|
|
value = *pPORTFIO & PF4;
|
|
if (value != 0) {
|
|
break;
|
|
}
|
|
udelay(10000);
|
|
}
|
|
printf("\b\b\b%2d ", delay);
|
|
}
|
|
if (value != 0)
|
|
printf("\b\bOK");
|
|
else {
|
|
result = -1;
|
|
printf("\b\bfailed");
|
|
}
|
|
|
|
delay = 5;
|
|
printf("\n--------Press SW12: %2d ", delay);
|
|
while (delay--) {
|
|
for (i = 0; i < 100; i++) {
|
|
value = *pPORTFIO & PF3;
|
|
if (value != 0) {
|
|
break;
|
|
}
|
|
udelay(10000);
|
|
}
|
|
printf("\b\b\b%2d ", delay);
|
|
}
|
|
if (value != 0)
|
|
printf("\b\bOK");
|
|
else {
|
|
result = -1;
|
|
printf("\b\bfailed");
|
|
}
|
|
|
|
delay = 5;
|
|
printf("\n--------Press SW13: %2d ", delay);
|
|
while (delay--) {
|
|
for (i = 0; i < 100; i++) {
|
|
value = *pPORTFIO & PF2;
|
|
if (value != 0) {
|
|
break;
|
|
}
|
|
udelay(10000);
|
|
}
|
|
printf("\b\b\b%2d ", delay);
|
|
}
|
|
if (value != 0)
|
|
printf("\b\bOK");
|
|
else {
|
|
result = -1;
|
|
printf("\b\bfailed");
|
|
}
|
|
printf("\n");
|
|
return result;
|
|
}
|
|
#endif
|