mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Nikita Kiryanov](/assets/img/avatar_default.png)
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
194 lines
4.9 KiB
C
194 lines
4.9 KiB
C
/*
|
|
* Configuration for Xilinx ZynqMP
|
|
* (C) Copyright 2014 - 2015 Xilinx, Inc.
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*
|
|
* Based on Configuration for Versatile Express
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __XILINX_ZYNQMP_H
|
|
#define __XILINX_ZYNQMP_H
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
|
|
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
|
|
/* Generic Interrupt Controller Definitions */
|
|
#define CONFIG_GICV2
|
|
#define GICD_BASE 0xF9010000
|
|
#define GICC_BASE 0xF9020000
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE
|
|
|
|
/* Have release address at the end of 256MB for now */
|
|
#define CPU_RELEASE_ADDR 0xFFFFFF0
|
|
|
|
/* Cache Definitions */
|
|
#define CONFIG_SYS_CACHELINE_SIZE 64
|
|
|
|
#define CONFIG_IDENT_STRING " Xilinx ZynqMP"
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
|
|
|
|
/* Flat Device Tree Definitions */
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
|
|
#define COUNTER_FREQUENCY 4000000
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x400000)
|
|
|
|
/* Serial setup */
|
|
#if defined(CONFIG_ZYNQMP_DCC)
|
|
# define CONFIG_ARM_DCC
|
|
# define CONFIG_CPU_ARMV8
|
|
#else
|
|
# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
|
|
# define CONFIG_ZYNQ_SERIAL
|
|
# endif
|
|
#endif
|
|
|
|
#define CONFIG_CONS_INDEX 0
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{ 4800, 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/* Command line configuration */
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_EXT4
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_FS_GENERIC
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_MP
|
|
|
|
#define CONFIG_CMD_MII
|
|
|
|
/* BOOTP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_MAY_FAIL
|
|
#define CONFIG_BOOTP_SERVERIP
|
|
|
|
/* SPI */
|
|
#ifdef CONFIG_ZYNQ_SPI
|
|
# define CONFIG_SPI_FLASH_SST
|
|
# define CONFIG_CMD_SF
|
|
#endif
|
|
|
|
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
|
|
# define CONFIG_MMC
|
|
# define CONFIG_GENERIC_MMC
|
|
# define CONFIG_SDHCI
|
|
# define CONFIG_ZYNQ_SDHCI
|
|
# define CONFIG_CMD_MMC
|
|
#endif
|
|
|
|
#if defined(CONFIG_ZYNQ_SDHCI)
|
|
# define CONFIG_FAT_WRITE
|
|
# define CONFIG_CMD_EXT4_WRITE
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x8000000
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"kernel_addr=0x80000\0" \
|
|
"fdt_addr=0x7000000\0" \
|
|
"fdt_high=0x10000000\0" \
|
|
"sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
|
|
"load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"
|
|
|
|
#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \
|
|
"earlycon=cdns,mmio,0xff000000,${baudrate}n8"
|
|
#define CONFIG_PREBOOT "run bootargs"
|
|
#define CONFIG_BOOTCOMMAND "run $modeboot"
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
/* Do not preserve environment */
|
|
#define CONFIG_ENV_IS_NOWHERE 1
|
|
#define CONFIG_ENV_SIZE 0x1000
|
|
|
|
/* Monitor Command Prompt */
|
|
/* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
|
|
/* Ethernet driver */
|
|
#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \
|
|
defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3)
|
|
# define CONFIG_NET_MULTI
|
|
# define CONFIG_ZYNQ_GEM
|
|
# define CONFIG_MII
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
# define CONFIG_PHYLIB
|
|
# define CONFIG_PHY_MARVELL
|
|
#endif
|
|
|
|
/* I2C */
|
|
#if defined(CONFIG_SYS_I2C_ZYNQ)
|
|
# define CONFIG_CMD_I2C
|
|
# define CONFIG_SYS_I2C
|
|
# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
|
|
# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
|
|
#endif
|
|
|
|
/* EEPROM */
|
|
#ifdef CONFIG_ZYNQMP_EEPROM
|
|
# define CONFIG_CMD_EEPROM
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
|
|
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
|
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
|
|
#endif
|
|
|
|
#ifdef CONFIG_AHCI
|
|
#define CONFIG_LIBATA
|
|
#define CONFIG_SCSI_AHCI
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
#define CONFIG_CMD_SCSI
|
|
#endif
|
|
|
|
#define CONFIG_FIT
|
|
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
|
|
|
|
#define CONFIG_CMD_BOOTI
|
|
#define CONFIG_CMD_UNZIP
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
|
#define CONFIG_CLOCKS
|
|
|
|
#endif /* __XILINX_ZYNQMP_H */
|