mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
51f957adf7
The soms with 4GB ddr have a rowaddr of 16 not 15, this allows the detection mechanism to properly identify them as 4GB. However these soms can be populated with whatever amount of memory the customer requests therefor we need a ram stride test. We can not use the get_ram_size() function because not all 4GB's of DDR is addressable on a 32-bit architecture. Therefore instead we use a memory stride of 128MB's and look for the address that the memory wraps. This function is used for all som types to catch most memory configurations. This is a revised version of Rabeeh Khoury's original code. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| mx6cuboxi.c | ||
| README | ||
How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i ----------------------------------------------------------- - Build U-Boot for Hummingboard/Cubox-i: $ make mrproper $ make mx6cuboxi_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Insert the SD card in the board, power it up and U-Boot messages should come up.