mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Andre Przywara](/assets/img/avatar_default.png)
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Fix all occurences in the FIT image documentation files where this was not observed, to not give bad examples to the reader. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
202 lines
7.2 KiB
Plaintext
202 lines
7.2 KiB
Plaintext
Command syntax extensions for the new uImage format
|
|
===================================================
|
|
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
With the introduction of the new uImage format, bootm command (and other
|
|
commands as well) have to understand new syntax of the arguments. This is
|
|
necessary in order to specify objects contained in the new uImage, on which
|
|
bootm has to operate. This note attempts to first summarize bootm usage
|
|
scenarios, and then introduces new argument syntax.
|
|
|
|
|
|
bootm usage scenarios
|
|
---------------------
|
|
|
|
Below is a summary of bootm usage scenarios, focused on booting a PowerPC
|
|
Linux kernel. The purpose of the following list is to document a complete list
|
|
of supported bootm usages.
|
|
|
|
Note: U-Boot supports two methods of booting a PowerPC Linux kernel: old way,
|
|
i.e., without passing the Flattened Device Tree (FDT), and new way, where the
|
|
kernel is passed a pointer to the FDT. The boot method is indicated for each
|
|
scenario.
|
|
|
|
|
|
1. bootm boot image at the current address, equivalent to 2,3,8
|
|
|
|
Old uImage:
|
|
2. bootm <addr1> /* single image at <addr1> */
|
|
3. bootm <addr1> /* multi-image at <addr1> */
|
|
4. bootm <addr1> - /* multi-image at <addr1> */
|
|
5. bootm <addr1> <addr2> /* single image at <addr1> */
|
|
6. bootm <addr1> <addr2> <addr3> /* single image at <addr1> */
|
|
7. bootm <addr1> - <addr3> /* single image at <addr1> */
|
|
|
|
New uImage:
|
|
8. bootm <addr1>
|
|
9. bootm [<addr1>]:<subimg1>
|
|
10. bootm [<addr1>]#<conf>[#<extra-conf[#...]]
|
|
11. bootm [<addr1>]:<subimg1> [<addr2>]:<subimg2>
|
|
12. bootm [<addr1>]:<subimg1> [<addr2>]:<subimg2> [<addr3>]:<subimg3>
|
|
13. bootm [<addr1>]:<subimg1> [<addr2>]:<subimg2> <addr3>
|
|
14. bootm [<addr1>]:<subimg1> - [<addr3>]:<subimg3>
|
|
15. bootm [<addr1>]:<subimg1> - <addr3>
|
|
|
|
|
|
Ad. 1. This is equivalent to cases 2,3,8, depending on the type of image at
|
|
the current image address.
|
|
- boot method: see cases 2,3,8
|
|
|
|
Ad. 2. Boot kernel image located at <addr1>.
|
|
- boot method: non-FDT
|
|
|
|
Ad. 3. First and second components of the image at <addr1> are assumed to be a
|
|
kernel and a ramdisk, respectively. The kernel is booted with initrd loaded
|
|
with the ramdisk from the image.
|
|
- boot method: depends on the number of components at <addr1>, and on whether
|
|
U-Boot is compiled with OF support:
|
|
|
|
| 2 components | 3 components |
|
|
| (kernel, initrd) | (kernel, initrd, fdt) |
|
|
---------------------------------------------------------------------
|
|
#ifdef CONFIG_OF_* | non-FDT | FDT |
|
|
#ifndef CONFIG_OF_* | non-FDT | non-FDT |
|
|
|
|
Ad. 4. Similar to case 3, but the kernel is booted without initrd. Second
|
|
component of the multi-image is irrelevant (it can be a dummy, 1-byte file).
|
|
- boot method: see case 3
|
|
|
|
Ad. 5. Boot kernel image located at <addr1> with initrd loaded with ramdisk
|
|
from the image at <addr2>.
|
|
- boot method: non-FDT
|
|
|
|
Ad. 6. <addr1> is the address of a kernel image, <addr2> is the address of a
|
|
ramdisk image, and <addr3> is the address of a FDT binary blob. Kernel is
|
|
booted with initrd loaded with ramdisk from the image at <addr2>.
|
|
- boot method: FDT
|
|
|
|
Ad. 7. <addr1> is the address of a kernel image and <addr3> is the address of
|
|
a FDT binary blob. Kernel is booted without initrd.
|
|
- boot method: FDT
|
|
|
|
Ad. 8. Image at <addr1> is assumed to contain a default configuration, which
|
|
is booted.
|
|
- boot method: FDT or non-FDT, depending on whether the default configuration
|
|
defines FDT
|
|
|
|
Ad. 9. Similar to case 2: boot kernel stored in <subimg1> from the image at
|
|
address <addr1>.
|
|
- boot method: non-FDT
|
|
|
|
Ad. 10. Boot configuration <conf> from the image at <addr1>.
|
|
- boot method: FDT or non-FDT, depending on whether the configuration given
|
|
defines FDT
|
|
|
|
Ad. 11. Equivalent to case 5: boot kernel stored in <subimg1> from the image
|
|
at <addr1> with initrd loaded with ramdisk <subimg2> from the image at
|
|
<addr2>.
|
|
- boot method: non-FDT
|
|
|
|
Ad. 12. Equivalent to case 6: boot kernel stored in <subimg1> from the image
|
|
at <addr1> with initrd loaded with ramdisk <subimg2> from the image at
|
|
<addr2>, and pass FDT blob <subimg3> from the image at <addr3>.
|
|
- boot method: FDT
|
|
|
|
Ad. 13. Similar to case 12, the difference being that <addr3> is the address
|
|
of FDT binary blob that is to be passed to the kernel.
|
|
- boot method: FDT
|
|
|
|
Ad. 14. Equivalent to case 7: boot kernel stored in <subimg1> from the image
|
|
at <addr1>, without initrd, and pass FDT blob <subimg3> from the image at
|
|
<addr3>.
|
|
- boot method: FDT
|
|
|
|
Ad. 15. Similar to case 14, the difference being that <addr3> is the address
|
|
of the FDT binary blob that is to be passed to the kernel.
|
|
- boot method: FDT
|
|
|
|
|
|
New uImage argument syntax
|
|
--------------------------
|
|
|
|
New uImage support introduces two new forms for bootm arguments, with the
|
|
following syntax:
|
|
|
|
- new uImage sub-image specification
|
|
<addr>:<sub-image unit_name>
|
|
|
|
- new uImage configuration specification
|
|
<addr>#<configuration unit_name>
|
|
|
|
- new uImage configuration specification with extra configuration components
|
|
<addr>#<configuration unit_name>[#<extra configuration unit_name>[#..]]
|
|
|
|
The extra configuration currently is supported only for additional device tree
|
|
overlays to apply on the base device tree supplied by the first configuration
|
|
unit.
|
|
|
|
Examples:
|
|
|
|
- boot kernel "kernel-1" stored in a new uImage located at 200000:
|
|
bootm 200000:kernel-1
|
|
|
|
- boot configuration "cfg-1" from a new uImage located at 200000:
|
|
bootm 200000#cfg-1
|
|
|
|
- boot configuration "cfg-1" with extra "cfg-2" from a new uImage located
|
|
at 200000:
|
|
bootm 200000#cfg-1#cfg-2
|
|
|
|
- boot "kernel-1" from a new uImage at 200000 with initrd "ramdisk-2" found in
|
|
some other new uImage stored at address 800000:
|
|
bootm 200000:kernel-1 800000:ramdisk-2
|
|
|
|
- boot "kernel-2" from a new uImage at 200000, with initrd "ramdisk-1" and FDT
|
|
"fdt-1", both stored in some other new uImage located at 800000:
|
|
bootm 200000:kernel-1 800000:ramdisk-1 800000:fdt-1
|
|
|
|
- boot kernel "kernel-2" with initrd "ramdisk-2", both stored in a new uImage
|
|
at address 200000, with a raw FDT blob stored at address 600000:
|
|
bootm 200000:kernel-2 200000:ramdisk-2 600000
|
|
|
|
- boot kernel "kernel-2" from new uImage at 200000 with FDT "fdt-1" from the
|
|
same new uImage:
|
|
bootm 200000:kernel-2 - 200000:fdt-1
|
|
|
|
|
|
Note on current image address
|
|
-----------------------------
|
|
|
|
When bootm is called without arguments, the image at current image address is
|
|
booted. The current image address is the address set most recently by a load
|
|
command, etc, and is by default equal to CONFIG_SYS_LOAD_ADDR. For example, consider
|
|
the following commands:
|
|
|
|
tftp 200000 /tftpboot/kernel
|
|
bootm
|
|
Last command is equivalent to:
|
|
bootm 200000
|
|
|
|
In case of the new uImage argument syntax, the address portion of any argument
|
|
can be omitted. If <addr3> is omitted, then it is assumed that image at
|
|
<addr2> should be used. Similarly, when <addr2> is omitted, it is assumed that
|
|
image at <addr1> should be used. If <addr1> is omitted, it is assumed that the
|
|
current image address is to be used. For example, consider the following
|
|
commands:
|
|
|
|
tftp 200000 /tftpboot/uImage
|
|
bootm :kernel-1
|
|
Last command is equivalent to:
|
|
bootm 200000:kernel-1
|
|
|
|
tftp 200000 /tftpboot/uImage
|
|
bootm 400000:kernel-1 :ramdisk-1
|
|
Last command is equivalent to:
|
|
bootm 400000:kernel-1 400000:ramdisk-1
|
|
|
|
tftp 200000 /tftpboot/uImage
|
|
bootm :kernel-1 400000:ramdisk-1 :fdt-1
|
|
Last command is equivalent to:
|
|
bootm 200000:kernel-1 400000:ramdisk-1 400000:fdt-1
|