mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-02 19:03:20 +09:00
![wdenk](/assets/img/avatar_default.png)
add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS
383 lines
10 KiB
C
383 lines
10 KiB
C
/*
|
|
* (C) Copyright 2000, 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include <commproc.h>
|
|
|
|
#ifdef CONFIG_STATUS_LED
|
|
# include <status_led.h>
|
|
#endif
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
/*
|
|
* 50 MHz SHARC access using UPM A
|
|
*/
|
|
const uint sharc_table[] =
|
|
{
|
|
/*
|
|
* Single Read. (Offset 0 in UPM RAM)
|
|
*/
|
|
0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
|
|
0xFFFFEC05, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Read. (Offset 8 in UPM RAM)
|
|
*/
|
|
/* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPM RAM)
|
|
*/
|
|
0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
|
|
0xFFFFEC05, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPM RAM)
|
|
*/
|
|
/* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPM RAM)
|
|
*/
|
|
/* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPM RAM)
|
|
*/
|
|
0x7FFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
|
|
/*
|
|
* 50 MHz SDRAM access using UPM B
|
|
*/
|
|
const uint sdram_table[] =
|
|
{
|
|
/*
|
|
* Single Read. (Offset 0 in UPM RAM)
|
|
*/
|
|
0x0E26FC04, 0x11ADFC04, 0xEFBBBC00, 0x1FF77C45, /* last */
|
|
_NOT_USED_,
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPM RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPM RAM)
|
|
*/
|
|
0x0E26FC04, 0x10ADFC04, 0xF0AFFC00, 0xF0AFFC00,
|
|
0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPM RAM)
|
|
*/
|
|
0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPM RAM)
|
|
*/
|
|
0x0E26BC00, 0x10AD7C00, 0xF0AFFC00, 0xF0AFFC00,
|
|
0xE1BBBC04, 0x1FF77C45, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPM RAM)
|
|
*/
|
|
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84,
|
|
0xFFFFFC05, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPM RAM)
|
|
*/
|
|
0x7FFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
#ifdef CONFIG_IVMS8
|
|
puts ("Board: IVMS8\n");
|
|
#endif
|
|
#ifdef CONFIG_IVML24
|
|
puts ("Board: IVM-L8/24\n");
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
long int
|
|
initdram (int board_type)
|
|
{
|
|
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immr->im_memctl;
|
|
long int size_b0;
|
|
|
|
/* enable SDRAM clock ("switch on" SDRAM) */
|
|
immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */
|
|
immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */
|
|
immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE ; /* output */
|
|
immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE ; /* assert SDRAM CLKE */
|
|
udelay(1);
|
|
|
|
/*
|
|
* Map controller bank 1 for ELIC SACCO
|
|
*/
|
|
memctl->memc_or1 = CFG_OR1;
|
|
memctl->memc_br1 = CFG_BR1;
|
|
|
|
/*
|
|
* Map controller bank 2 for ELIC EPIC
|
|
*/
|
|
memctl->memc_or2 = CFG_OR2;
|
|
memctl->memc_br2 = CFG_BR2;
|
|
|
|
/*
|
|
* Configure UPMA for SHARC
|
|
*/
|
|
upmconfig(UPMA, (uint *)sharc_table, sizeof(sharc_table)/sizeof(uint));
|
|
|
|
#if defined(CONFIG_IVML24)
|
|
/*
|
|
* Map controller bank 4 for HDLC Address space
|
|
*/
|
|
memctl->memc_or4 = CFG_OR4;
|
|
memctl->memc_br4 = CFG_BR4;
|
|
#endif
|
|
|
|
/*
|
|
* Map controller bank 5 for SHARC
|
|
*/
|
|
memctl->memc_or5 = CFG_OR5;
|
|
memctl->memc_br5 = CFG_BR5;
|
|
|
|
memctl->memc_mamr = 0x00001000;
|
|
|
|
/*
|
|
* Configure UPMB for SDRAM
|
|
*/
|
|
upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
|
|
|
|
memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller bank 3 to the SDRAM bank at preliminary address.
|
|
*/
|
|
memctl->memc_or3 = CFG_OR3_PRELIM;
|
|
memctl->memc_br3 = CFG_BR3_PRELIM;
|
|
|
|
memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
|
|
|
|
udelay(200);
|
|
memctl->memc_mcr = 0x80806105; /* precharge */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806106; /* load mode register */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
udelay(1);
|
|
memctl->memc_mcr = 0x80806130; /* autorefresh */
|
|
|
|
memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*/
|
|
size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
|
|
|
|
memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
|
|
|
|
return (size_b0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
|
|
{
|
|
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immr->im_memctl;
|
|
volatile long int *addr;
|
|
ulong cnt, val;
|
|
ulong save[32]; /* to make test non-destructive */
|
|
unsigned char i = 0;
|
|
|
|
memctl->memc_mbmr = mamr_value;
|
|
|
|
for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
save[i++] = *addr;
|
|
*addr = ~cnt;
|
|
}
|
|
|
|
/* write 0 to base address */
|
|
addr = base;
|
|
save[i] = *addr;
|
|
*addr = 0;
|
|
|
|
/* check at base address */
|
|
if ((val = *addr) != 0) {
|
|
*addr = save[i];
|
|
return (0);
|
|
}
|
|
|
|
for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
val = *addr;
|
|
*addr = save[--i];
|
|
|
|
if (val != (~cnt)) {
|
|
return (cnt * sizeof(long));
|
|
}
|
|
}
|
|
return (maxsize);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void reset_phy(void)
|
|
{
|
|
immap_t *immr = (immap_t *)CFG_IMMR;
|
|
|
|
/* De-assert Ethernet Powerdown */
|
|
immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */
|
|
immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */
|
|
immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN ; /* output */
|
|
immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
|
|
udelay(1000);
|
|
|
|
/*
|
|
* RESET is implemented by a positive pulse of at least 1 us
|
|
* at the reset pin.
|
|
*
|
|
* Configure RESET pins for NS DP83843 PHY, and RESET chip.
|
|
*
|
|
* Note: The RESET pin is high active, but there is an
|
|
* inverter on the SPD823TS board...
|
|
*/
|
|
immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET);
|
|
immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET;
|
|
/* assert RESET signal of PHY */
|
|
immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET);
|
|
udelay (10);
|
|
/* de-assert RESET signal of PHY */
|
|
immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET;
|
|
udelay (10);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void show_boot_progress (int status)
|
|
{
|
|
#if defined(CONFIG_STATUS_LED)
|
|
# if defined(STATUS_LED_YELLOW)
|
|
status_led_set (STATUS_LED_YELLOW,
|
|
(status < 0) ? STATUS_LED_ON : STATUS_LED_OFF);
|
|
# endif /* STATUS_LED_YELLOW */
|
|
# if defined(STATUS_LED_BOOT)
|
|
if (status == 6)
|
|
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
|
|
# endif /* STATUS_LED_BOOT */
|
|
#endif /* CONFIG_STATUS_LED */
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void ide_set_reset(int on)
|
|
{
|
|
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
|
|
|
/*
|
|
* Configure PC for IDE Reset Pin
|
|
*/
|
|
if (on) { /* assert RESET */
|
|
immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
|
|
} else { /* release RESET */
|
|
immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
|
|
}
|
|
|
|
/* program port pin as GPIO output */
|
|
immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
|
|
immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
|
|
immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|