mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 13:58:51 +09:00
![Linus Walleij](/assets/img/avatar_default.png)
The PCI support for the Integrator AP has apparently never been finished and I strongly suspect that it has never worked, so let's fix it. This is a list of the more or less un-splittable changes done in this driver rewrite: - Replace the register definitions stashed into the config file (!) with a copy if the register file from the Linux kernels arch/arm/include/asm/hardware/pci_v3.h - Delete the unreadable gigantic macros that perform the config accesses and replace them with copyedited code from Linux arch/arm/mach-integrator/pci_v3.c - Rewrite the rest of the setup code to use the v3_[read|write][lwb]() accessors. - Enable PCI by default in the AP board configuration. - Fix checkpatch warnings and make code more conformant. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
201 lines
7.6 KiB
C
201 lines
7.6 KiB
C
/*
|
|
* arch/arm/include/asm/hardware/pci_v3.h
|
|
*
|
|
* Internal header file PCI V3 chip
|
|
*
|
|
* Copyright (C) ARM Limited
|
|
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#ifndef ASM_ARM_HARDWARE_PCI_V3_H
|
|
#define ASM_ARM_HARDWARE_PCI_V3_H
|
|
|
|
/* -------------------------------------------------------------------------------
|
|
* V3 Local Bus to PCI Bridge definitions
|
|
* -------------------------------------------------------------------------------
|
|
* Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
|
|
* All V3 register names are prefaced by V3_ to avoid clashing with any other
|
|
* PCI definitions. Their names match the user's manual.
|
|
*
|
|
* I'm assuming that I20 is disabled.
|
|
*
|
|
*/
|
|
#define V3_PCI_VENDOR 0x00000000
|
|
#define V3_PCI_DEVICE 0x00000002
|
|
#define V3_PCI_CMD 0x00000004
|
|
#define V3_PCI_STAT 0x00000006
|
|
#define V3_PCI_CC_REV 0x00000008
|
|
#define V3_PCI_HDR_CFG 0x0000000C
|
|
#define V3_PCI_IO_BASE 0x00000010
|
|
#define V3_PCI_BASE0 0x00000014
|
|
#define V3_PCI_BASE1 0x00000018
|
|
#define V3_PCI_SUB_VENDOR 0x0000002C
|
|
#define V3_PCI_SUB_ID 0x0000002E
|
|
#define V3_PCI_ROM 0x00000030
|
|
#define V3_PCI_BPARAM 0x0000003C
|
|
#define V3_PCI_MAP0 0x00000040
|
|
#define V3_PCI_MAP1 0x00000044
|
|
#define V3_PCI_INT_STAT 0x00000048
|
|
#define V3_PCI_INT_CFG 0x0000004C
|
|
#define V3_LB_BASE0 0x00000054
|
|
#define V3_LB_BASE1 0x00000058
|
|
#define V3_LB_MAP0 0x0000005E
|
|
#define V3_LB_MAP1 0x00000062
|
|
#define V3_LB_BASE2 0x00000064
|
|
#define V3_LB_MAP2 0x00000066
|
|
#define V3_LB_SIZE 0x00000068
|
|
#define V3_LB_IO_BASE 0x0000006E
|
|
#define V3_FIFO_CFG 0x00000070
|
|
#define V3_FIFO_PRIORITY 0x00000072
|
|
#define V3_FIFO_STAT 0x00000074
|
|
#define V3_LB_ISTAT 0x00000076
|
|
#define V3_LB_IMASK 0x00000077
|
|
#define V3_SYSTEM 0x00000078
|
|
#define V3_LB_CFG 0x0000007A
|
|
#define V3_PCI_CFG 0x0000007C
|
|
#define V3_DMA_PCI_ADR0 0x00000080
|
|
#define V3_DMA_PCI_ADR1 0x00000090
|
|
#define V3_DMA_LOCAL_ADR0 0x00000084
|
|
#define V3_DMA_LOCAL_ADR1 0x00000094
|
|
#define V3_DMA_LENGTH0 0x00000088
|
|
#define V3_DMA_LENGTH1 0x00000098
|
|
#define V3_DMA_CSR0 0x0000008B
|
|
#define V3_DMA_CSR1 0x0000009B
|
|
#define V3_DMA_CTLB_ADR0 0x0000008C
|
|
#define V3_DMA_CTLB_ADR1 0x0000009C
|
|
#define V3_DMA_DELAY 0x000000E0
|
|
#define V3_MAIL_DATA 0x000000C0
|
|
#define V3_PCI_MAIL_IEWR 0x000000D0
|
|
#define V3_PCI_MAIL_IERD 0x000000D2
|
|
#define V3_LB_MAIL_IEWR 0x000000D4
|
|
#define V3_LB_MAIL_IERD 0x000000D6
|
|
#define V3_MAIL_WR_STAT 0x000000D8
|
|
#define V3_MAIL_RD_STAT 0x000000DA
|
|
#define V3_QBA_MAP 0x000000DC
|
|
|
|
/* PCI COMMAND REGISTER bits
|
|
*/
|
|
#define V3_COMMAND_M_FBB_EN (1 << 9)
|
|
#define V3_COMMAND_M_SERR_EN (1 << 8)
|
|
#define V3_COMMAND_M_PAR_EN (1 << 6)
|
|
#define V3_COMMAND_M_MASTER_EN (1 << 2)
|
|
#define V3_COMMAND_M_MEM_EN (1 << 1)
|
|
#define V3_COMMAND_M_IO_EN (1 << 0)
|
|
|
|
/* SYSTEM REGISTER bits
|
|
*/
|
|
#define V3_SYSTEM_M_RST_OUT (1 << 15)
|
|
#define V3_SYSTEM_M_LOCK (1 << 14)
|
|
|
|
/* PCI_CFG bits
|
|
*/
|
|
#define V3_PCI_CFG_M_I2O_EN (1 << 15)
|
|
#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14)
|
|
#define V3_PCI_CFG_M_IO_DIS (1 << 13)
|
|
#define V3_PCI_CFG_M_EN3V (1 << 12)
|
|
#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
|
|
#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
|
|
#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
|
|
|
|
/* PCI_BASE register bits (PCI -> Local Bus)
|
|
*/
|
|
#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000
|
|
#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00
|
|
#define V3_PCI_BASE_M_PREFETCH (1 << 3)
|
|
#define V3_PCI_BASE_M_TYPE (3 << 1)
|
|
#define V3_PCI_BASE_M_IO (1 << 0)
|
|
|
|
/* PCI MAP register bits (PCI -> Local bus)
|
|
*/
|
|
#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
|
|
#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
|
|
#define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
|
|
#define V3_PCI_MAP_M_SWAP (3 << 8)
|
|
#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
|
|
#define V3_PCI_MAP_M_REG_EN (1 << 1)
|
|
#define V3_PCI_MAP_M_ENABLE (1 << 0)
|
|
|
|
#define V3_PCI_MAP_M_ADR_SIZE_1MB (0 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_2MB (1 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_4MB (2 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_8MB (3 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_16MB (4 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_32MB (5 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_64MB (6 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_128MB (7 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_256MB (8 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_512MB (9 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_1GB (10 << 4)
|
|
#define V3_PCI_MAP_M_ADR_SIZE_2GB (11 << 4)
|
|
|
|
/*
|
|
* LB_BASE0,1 register bits (Local bus -> PCI)
|
|
*/
|
|
#define V3_LB_BASE_ADR_BASE 0xfff00000
|
|
#define V3_LB_BASE_SWAP (3 << 8)
|
|
#define V3_LB_BASE_ADR_SIZE (15 << 4)
|
|
#define V3_LB_BASE_PREFETCH (1 << 3)
|
|
#define V3_LB_BASE_ENABLE (1 << 0)
|
|
|
|
#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
|
|
|
|
#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
|
|
|
|
/*
|
|
* LB_MAP0,1 register bits (Local bus -> PCI)
|
|
*/
|
|
#define V3_LB_MAP_MAP_ADR 0xfff0
|
|
#define V3_LB_MAP_TYPE (7 << 1)
|
|
#define V3_LB_MAP_AD_LOW_EN (1 << 0)
|
|
|
|
#define V3_LB_MAP_TYPE_IACK (0 << 1)
|
|
#define V3_LB_MAP_TYPE_IO (1 << 1)
|
|
#define V3_LB_MAP_TYPE_MEM (3 << 1)
|
|
#define V3_LB_MAP_TYPE_CONFIG (5 << 1)
|
|
#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
|
|
|
|
/* PCI MAP register bits (PCI -> Local bus) */
|
|
#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
|
|
|
|
/*
|
|
* LB_BASE2 register bits (Local bus -> PCI IO)
|
|
*/
|
|
#define V3_LB_BASE2_ADR_BASE 0xff00
|
|
#define V3_LB_BASE2_SWAP (3 << 6)
|
|
#define V3_LB_BASE2_ENABLE (1 << 0)
|
|
|
|
#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
|
|
|
|
/*
|
|
* LB_MAP2 register bits (Local bus -> PCI IO)
|
|
*/
|
|
#define V3_LB_MAP2_MAP_ADR 0xff00
|
|
|
|
#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
|
|
|
|
#endif
|