BOUGH CHEN 5cf12031a4 mmc: correct the HS400 initialization process ... After the commit b9a2a0e2e9 ("mmc: Add support for downgrading HS200/HS400 to HS mode"), it add a parameter in mmc_set_card_speed() which indicates that the HS200/HS400 to HS downgrade is happening. During the HS400 initialization, first select to HS200, and config the related clock rate, then downgrade to HS mode. So here also need to config the downgrade value to be true for two reasons. First, make sure in the function mmc_set_card_speed(), after switch to HS mode, first config the clock rate, then read the EXT_CSD, avoid receiving data of EXT_CSD in HS mode at 200MHz. Second, after issue the MMC_CMD_SWITCH command, it need to wait a bit then switch bus properties. Test on i.MX8QM MEK board, some Micron eMMC will stuck in transfer mode in this case, and USDHC will never get data transfer complete status, cause the uboot hang. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>		2019-03-29 10:53:18 -04:00
..
adc	adc: exynos-adc: Fix wrong bit operation used to stop the ADC	2019-03-11 15:53:19 +09:00
ata	scsi: ceva: add ls2080a soc support	2018-12-06 14:38:03 -08:00
axi	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
bios_emulator	bios_emulator: remove assignment without effect	2018-07-23 14:33:21 -04:00
block	blk: Increase cache element size	2019-01-15 15:28:53 -05:00
board	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
bootcount	bootcount: add a DM RTC backing store for bootcount	2018-12-10 10:04:45 +01:00
clk	clk: renesas: Add support for setting MMCIF clock divider on Gen2	2019-03-25 20:26:53 +01:00
core	dm: syscon: Don't require a regmap for PCI devices	2019-02-20 15:21:44 +08:00
cpu	cpu: Bind timer driver for boot hart	2019-02-27 09:12:33 +08:00
crypto	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
ddr	mv_ddr: ddr3: only use active chip-selects when tuning ODT	2019-03-19 09:22:05 +01:00
demo	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
dfu	dfu: mmc: call fs functions instead of run_command	2019-01-30 21:22:53 -05:00
dma	dma: add bcm6348-iudma support	2018-12-19 15:23:00 +01:00
fastboot	fastboot: common: fix default fastboot_boot on 64-bit	2019-03-16 13:29:43 +01:00
firmware	firmware: psci: introduce SPL_ARM_PSCI_FW	2018-12-12 12:14:25 -05:00
fpga	ARM: socfpga: stratix10: Return valid error code from FPGA driver	2019-02-18 13:00:54 +01:00
gpio	gpio: altera_pio: fix get_value	2019-02-25 16:07:36 +01:00
hwspinlock	hwspinlock: add stm32 hardware spinlock support	2018-12-06 23:26:33 -05:00
i2c	i2c: i2c_cdns: Fix below warnings with checker tool	2019-03-21 08:21:43 +01:00
input	Kconfig: tegra: Migrate TEGRA_KEYBOARD	2019-02-20 09:01:45 -07:00
led	dm: led: move default state support in led uclass	2018-08-10 10:27:32 -04:00
mailbox	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
memory	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
misc	xilinx: common: Remove !DM_i2C code for reading mac from eeprom	2019-02-14 14:31:10 +01:00
mmc	mmc: correct the HS400 initialization process	2019-03-29 10:53:18 -04:00
mtd	Convert CONFIG_SF_DEFAULT_* to Kconfig	2019-03-25 17:36:53 -04:00
net	drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset	2019-03-15 11:52:01 +05:30
nvme	blk: Call part_init() in the post_probe() method	2018-11-14 09:16:27 -08:00
pch	pch: Add ioctl support	2019-02-20 15:27:08 +08:00
pci	pci: pci_mvebu: Add comment about missing of_n_addr_cells() call	2019-03-19 09:22:05 +01:00
pcmcia	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
phy	phy: sun4i-usb: Use CLK and RESET support	2019-01-18 22:19:09 +05:30
pinctrl	pinctrl: add imx8m driver	2019-03-13 09:14:35 +01:00
power	Merge branch 'master' of git://git.denx.de/u-boot-samsung	2019-03-14 11:37:11 -04:00
pwm	pwm: sunxi: choose best prescaler to improve PWM resolution	2018-10-24 21:57:16 +05:30
qe	drivers: qe: add TFABOOT support	2018-12-06 14:37:51 -08:00
ram	rockchip: ram: update license for sdram driver	2019-01-02 22:37:10 +01:00
remoteproc	spl: Allow remoteproc drivers to be used within SPL	2018-09-11 08:32:55 -04:00
reset	reset: Add Allwinner RESET driver	2019-01-18 22:19:08 +05:30
rtc	rtc: m41t62: Convert the RTC driver to support the driver model (DM)	2018-12-03 10:44:10 -05:00
scsi	dm: scsi: report correct device number	2019-02-19 08:55:43 -05:00
serial	imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef	2019-03-13 09:14:35 +01:00
smem	drivers: smem: sandbox	2018-07-19 16:31:38 -04:00
soc	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
sound	x86: Add sound support for samus	2019-02-20 15:27:11 +08:00
spi	spi: Rename sun4i_spi.c into spi-sunxi.c	2019-03-04 18:08:56 +05:30
spmi	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
sysreset	x86: Add efi runtime reset	2019-03-11 00:44:42 +01:00
tee	tee: change return code for REE FS supplicant cmd	2018-12-15 11:49:19 -05:00
thermal	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
timer	x86: tsc: Add support for native calibration of TSC freq	2019-02-12 14:37:16 +08:00
tpm	tpm: Export the open/close functions	2018-11-29 09:30:06 -07:00
usb	usb: udc-uclass: Fixed problem when no alias is defined in DT	2019-03-16 13:29:43 +01:00
video	video: bmp: Add support for 24bpp BMP files on 16bpp displays	2019-02-15 16:51:12 +01:00
virtio	virtio: Add a Sandbox transport driver	2018-11-14 09:16:28 -08:00
w1	w1: Add driver for i.MX bus master controller	2019-01-01 14:12:18 +01:00
w1-eeprom	w1-eeprom: Add support for Maxim DS2502 add only memory	2018-11-16 16:51:55 -05:00
watchdog	watchdog: bcm6345: allow to use this driver on arm bcm63158	2019-02-09 07:50:59 -05:00
Kconfig	x86: sandbox: pch: Add a CONFIG option for PCH	2019-02-20 15:25:30 +08:00
Makefile	x86: sandbox: pch: Add a CONFIG option for PCH	2019-02-20 15:25:30 +08:00