mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-07 05:13:21 +09:00
![Krzysztof Kozlowski](/assets/img/avatar_default.png)
Changing voltage and enabling regulator might require delays so the regulator stabilizes at expected level. Add support for "regulator-ramp-delay" binding which can introduce required time to both enabling the regulator and to changing the voltage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
66 lines
2.8 KiB
Plaintext
66 lines
2.8 KiB
Plaintext
Voltage/Current regulator
|
|
|
|
Binding:
|
|
The regulator devices don't use the "compatible" property. The binding is done
|
|
by the prefix of regulator node's name, or, if this fails, by the prefix of the
|
|
regulator's "regulator-name" property. Usually the pmic I/O driver will provide
|
|
the array of 'struct pmic_child_info' with the prefixes and compatible drivers.
|
|
The bind is done by calling function: pmic_bind_childs().
|
|
Example drivers:
|
|
pmic: drivers/power/pmic/max77686.c
|
|
regulator: drivers/power/regulator/max77686.c
|
|
|
|
For the node name e.g.: "prefix[:alpha:]num { ... }":
|
|
- the driver prefix should be: "prefix" - case sensitive
|
|
- the node name's "num" is set as "dev->driver_data" on bind
|
|
|
|
Example the prefix "ldo" will pass for: "ldo1", "ldo@1", "ldoreg@1, ...
|
|
|
|
Binding by means of the node's name is preferred. However if the node names
|
|
would produce ambiguous prefixes (like "regulator@1" and "regualtor@11") and you
|
|
can't or do not want to change them then binding against the "regulator-name"
|
|
property is possible. The syntax for the prefix of the "regulator-name" property
|
|
is the same as the one for the regulator's node name.
|
|
Use case: a regulator named "regulator@1" to be bound to a driver named
|
|
"LDO_DRV" and a regulator named "regualator@11" to be bound to an other driver
|
|
named "BOOST_DRV". Using prefix "regualtor@1" for driver matching would load
|
|
the same driver for both regulators, hence the prefix is ambiguous.
|
|
|
|
Optional properties:
|
|
- regulator-name: a string, required by the regulator uclass, used for driver
|
|
binding if binding by node's name prefix fails
|
|
- regulator-min-microvolt: a minimum allowed Voltage value
|
|
- regulator-max-microvolt: a maximum allowed Voltage value
|
|
- regulator-min-microamp: a minimum allowed Current value
|
|
- regulator-max-microamp: a maximum allowed Current value
|
|
- regulator-always-on: regulator should never be disabled
|
|
- regulator-boot-on: enabled by bootloader/firmware
|
|
- regulator-ramp-delay: ramp delay for regulator (in uV/us)
|
|
|
|
Note
|
|
The "regulator-name" constraint is used for setting the device's uclass
|
|
platform data '.name' field. And the regulator device name is set from
|
|
it's node name. If "regulator-name" is not provided in dts, node name
|
|
is chosen for setting the device's uclass platform data '.name' field.
|
|
|
|
Other kernel-style properties, are currently not used.
|
|
|
|
Note:
|
|
For the regulator autoset from constraints, the framework expects that:
|
|
- regulator-min-microvolt is equal to regulator-max-microvolt
|
|
- regulator-min-microamp is equal to regulator-max-microamp
|
|
- regulator-always-on or regulator-boot-on is set
|
|
|
|
Example:
|
|
ldo0 {
|
|
/* Optional */
|
|
regulator-name = "VDDQ_EMMC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-min-microamp = <100000>;
|
|
regulator-max-microamp = <100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12000>;
|
|
};
|