u-boot-brain/drivers/dfu/dfu_mmc.c
Jaehoon Chung b5f3405b9d dfu: add 'SKIP' entity
Define a new 'SKIP' type for the DFU entities. The flashed data for that
entity is simply ignored without returning any error values.

This allows to have one flashing procedure and images for the different
board types or variants, where each board uses only the images relevant
to it and skips the rest. This is especially usefull for the THOR
protocol, which usually transfers more than one file in a single session.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
[mszyprow: rephrased commit message and docs for easier reading, changed
	   subject to "dfu: add 'SKIP' entity"]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-31 14:08:56 +01:00

444 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* dfu.c -- DFU back-end routines
*
* Copyright (C) 2012 Samsung Electronics
* author: Lukasz Majewski <l.majewski@samsung.com>
*/
#include <common.h>
#include <log.h>
#include <malloc.h>
#include <errno.h>
#include <div64.h>
#include <dfu.h>
#include <ext4fs.h>
#include <fat.h>
#include <mmc.h>
#include <part.h>
static unsigned char *dfu_file_buf;
static u64 dfu_file_buf_len;
static u64 dfu_file_buf_offset;
static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
struct mmc *mmc;
u32 blk_start, blk_count, n = 0;
int ret, part_num_bkp = 0;
mmc = find_mmc_device(dfu->data.mmc.dev_num);
if (!mmc) {
pr_err("Device MMC %d - not found!", dfu->data.mmc.dev_num);
return -ENODEV;
}
/*
* We must ensure that we work in lba_blk_size chunks, so ALIGN
* this value.
*/
*len = ALIGN(*len, dfu->data.mmc.lba_blk_size);
blk_start = dfu->data.mmc.lba_start +
(u32)lldiv(offset, dfu->data.mmc.lba_blk_size);
blk_count = *len / dfu->data.mmc.lba_blk_size;
if (blk_start + blk_count >
dfu->data.mmc.lba_start + dfu->data.mmc.lba_size) {
puts("Request would exceed designated area!\n");
return -EINVAL;
}
if (dfu->data.mmc.hw_partition >= 0) {
part_num_bkp = mmc_get_blk_desc(mmc)->hwpart;
ret = blk_select_hwpart_devnum(IF_TYPE_MMC,
dfu->data.mmc.dev_num,
dfu->data.mmc.hw_partition);
if (ret)
return ret;
}
debug("%s: %s dev: %d start: %d cnt: %d buf: 0x%p\n", __func__,
op == DFU_OP_READ ? "MMC READ" : "MMC WRITE",
dfu->data.mmc.dev_num, blk_start, blk_count, buf);
switch (op) {
case DFU_OP_READ:
n = blk_dread(mmc_get_blk_desc(mmc), blk_start, blk_count, buf);
break;
case DFU_OP_WRITE:
n = blk_dwrite(mmc_get_blk_desc(mmc), blk_start, blk_count,
buf);
break;
default:
pr_err("Operation not supported\n");
}
if (n != blk_count) {
pr_err("MMC operation failed");
if (dfu->data.mmc.hw_partition >= 0)
blk_select_hwpart_devnum(IF_TYPE_MMC,
dfu->data.mmc.dev_num,
part_num_bkp);
return -EIO;
}
if (dfu->data.mmc.hw_partition >= 0) {
ret = blk_select_hwpart_devnum(IF_TYPE_MMC,
dfu->data.mmc.dev_num,
part_num_bkp);
if (ret)
return ret;
}
return 0;
}
static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu,
u64 offset, void *buf, u64 *len)
{
char dev_part_str[8];
int ret;
int fstype;
loff_t size = 0;
switch (dfu->layout) {
case DFU_FS_FAT:
fstype = FS_TYPE_FAT;
break;
case DFU_FS_EXT4:
fstype = FS_TYPE_EXT;
break;
case DFU_SKIP:
return 0;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
return -1;
}
snprintf(dev_part_str, sizeof(dev_part_str), "%d:%d",
dfu->data.mmc.dev, dfu->data.mmc.part);
ret = fs_set_blk_dev("mmc", dev_part_str, fstype);
if (ret) {
puts("dfu: fs_set_blk_dev error!\n");
return ret;
}
switch (op) {
case DFU_OP_READ:
ret = fs_read(dfu->name, (size_t)buf, offset, *len, &size);
if (ret) {
puts("dfu: fs_read error!\n");
return ret;
}
*len = size;
break;
case DFU_OP_WRITE:
ret = fs_write(dfu->name, (size_t)buf, offset, *len, &size);
if (ret) {
puts("dfu: fs_write error!\n");
return ret;
}
break;
case DFU_OP_SIZE:
ret = fs_size(dfu->name, &size);
if (ret) {
puts("dfu: fs_size error!\n");
return ret;
}
*len = size;
break;
default:
return -1;
}
return ret;
}
static int mmc_file_buf_write(struct dfu_entity *dfu, u64 offset, void *buf, long *len)
{
int ret = 0;
if (offset == 0) {
dfu_file_buf_len = 0;
dfu_file_buf_offset = 0;
}
/* Add to the current buffer. */
if (dfu_file_buf_len + *len > CONFIG_SYS_DFU_MAX_FILE_SIZE)
*len = CONFIG_SYS_DFU_MAX_FILE_SIZE - dfu_file_buf_len;
memcpy(dfu_file_buf + dfu_file_buf_len, buf, *len);
dfu_file_buf_len += *len;
if (dfu_file_buf_len == CONFIG_SYS_DFU_MAX_FILE_SIZE) {
ret = mmc_file_op(DFU_OP_WRITE, dfu, dfu_file_buf_offset,
dfu_file_buf, &dfu_file_buf_len);
dfu_file_buf_offset += dfu_file_buf_len;
dfu_file_buf_len = 0;
}
return ret;
}
static int mmc_file_buf_write_finish(struct dfu_entity *dfu)
{
int ret = mmc_file_op(DFU_OP_WRITE, dfu, dfu_file_buf_offset,
dfu_file_buf, &dfu_file_buf_len);
/* Now that we're done */
dfu_file_buf_len = 0;
dfu_file_buf_offset = 0;
return ret;
}
int dfu_write_medium_mmc(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
int ret = -1;
switch (dfu->layout) {
case DFU_RAW_ADDR:
ret = mmc_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
break;
case DFU_FS_FAT:
case DFU_FS_EXT4:
ret = mmc_file_buf_write(dfu, offset, buf, len);
break;
case DFU_SKIP:
ret = 0;
break;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
}
return ret;
}
int dfu_flush_medium_mmc(struct dfu_entity *dfu)
{
int ret = 0;
if (dfu->layout != DFU_RAW_ADDR) {
/* Do stuff here. */
ret = mmc_file_buf_write_finish(dfu);
}
return ret;
}
int dfu_get_medium_size_mmc(struct dfu_entity *dfu, u64 *size)
{
int ret;
switch (dfu->layout) {
case DFU_RAW_ADDR:
*size = dfu->data.mmc.lba_size * dfu->data.mmc.lba_blk_size;
return 0;
case DFU_FS_FAT:
case DFU_FS_EXT4:
ret = mmc_file_op(DFU_OP_SIZE, dfu, 0, NULL, size);
if (ret < 0)
return ret;
return 0;
case DFU_SKIP:
return 0;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
return -1;
}
}
static int mmc_file_buf_read(struct dfu_entity *dfu, u64 offset, void *buf,
long *len)
{
int ret;
if (offset == 0 || offset >= dfu_file_buf_offset + dfu_file_buf_len ||
offset + *len < dfu_file_buf_offset) {
u64 file_len = CONFIG_SYS_DFU_MAX_FILE_SIZE;
ret = mmc_file_op(DFU_OP_READ, dfu, offset, dfu_file_buf,
&file_len);
if (ret < 0)
return ret;
dfu_file_buf_len = file_len;
dfu_file_buf_offset = offset;
}
if (offset + *len > dfu_file_buf_offset + dfu_file_buf_len)
return -EINVAL;
/* Add to the current buffer. */
memcpy(buf, dfu_file_buf + offset - dfu_file_buf_offset, *len);
return 0;
}
int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf,
long *len)
{
int ret = -1;
switch (dfu->layout) {
case DFU_RAW_ADDR:
ret = mmc_block_op(DFU_OP_READ, dfu, offset, buf, len);
break;
case DFU_FS_FAT:
case DFU_FS_EXT4:
ret = mmc_file_buf_read(dfu, offset, buf, len);
break;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
}
return ret;
}
void dfu_free_entity_mmc(struct dfu_entity *dfu)
{
if (dfu_file_buf) {
free(dfu_file_buf);
dfu_file_buf = NULL;
}
}
/*
* @param s Parameter string containing space-separated arguments:
* 1st:
* raw (raw read/write)
* fat (files)
* ext4 (^)
* part (partition image)
* 2nd and 3rd:
* lba_start and lba_size, for raw write
* mmc_dev and mmc_part, for filesystems and part
* 4th (optional):
* mmcpart <num> (access to HW eMMC partitions)
*/
int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s)
{
const char *entity_type;
ssize_t second_arg;
size_t third_arg;
struct mmc *mmc;
const char *argv[3];
const char **parg = argv;
dfu->data.mmc.dev_num = simple_strtoul(devstr, NULL, 10);
for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
*parg = strsep(&s, " ");
if (*parg == NULL) {
pr_err("Invalid number of arguments.\n");
return -ENODEV;
}
}
entity_type = argv[0];
/*
* Base 0 means we'll accept (prefixed with 0x or 0) base 16, 8,
* with default 10.
*/
second_arg = simple_strtol(argv[1], NULL, 0);
third_arg = simple_strtoul(argv[2], NULL, 0);
mmc = find_mmc_device(dfu->data.mmc.dev_num);
if (mmc == NULL) {
pr_err("Couldn't find MMC device no. %d.\n",
dfu->data.mmc.dev_num);
return -ENODEV;
}
if (mmc_init(mmc)) {
pr_err("Couldn't init MMC device.\n");
return -ENODEV;
}
dfu->data.mmc.hw_partition = -EINVAL;
if (!strcmp(entity_type, "raw")) {
dfu->layout = DFU_RAW_ADDR;
dfu->data.mmc.lba_start = second_arg;
dfu->data.mmc.lba_size = third_arg;
dfu->data.mmc.lba_blk_size = mmc->read_bl_len;
/*
* Check for an extra entry at dfu_alt_info env variable
* specifying the mmc HW defined partition number
*/
if (s)
if (!strcmp(strsep(&s, " "), "mmcpart"))
dfu->data.mmc.hw_partition =
simple_strtoul(s, NULL, 0);
} else if (!strcmp(entity_type, "part")) {
struct disk_partition partinfo;
struct blk_desc *blk_dev = mmc_get_blk_desc(mmc);
int mmcdev = second_arg;
int mmcpart = third_arg;
int offset = 0;
if (part_get_info(blk_dev, mmcpart, &partinfo) != 0) {
pr_err("Couldn't find part #%d on mmc device #%d\n",
mmcpart, mmcdev);
return -ENODEV;
}
/*
* Check for an extra entry at dfu_alt_info env variable
* specifying the mmc HW defined partition number
*/
if (s)
if (!strcmp(strsep(&s, " "), "offset"))
offset = simple_strtoul(s, NULL, 0);
dfu->layout = DFU_RAW_ADDR;
dfu->data.mmc.lba_start = partinfo.start + offset;
dfu->data.mmc.lba_size = partinfo.size-offset;
dfu->data.mmc.lba_blk_size = partinfo.blksz;
} else if (!strcmp(entity_type, "fat")) {
dfu->layout = DFU_FS_FAT;
} else if (!strcmp(entity_type, "ext4")) {
dfu->layout = DFU_FS_EXT4;
} else if (!strcmp(entity_type, "skip")) {
dfu->layout = DFU_SKIP;
} else {
pr_err("Memory layout (%s) not supported!\n", entity_type);
return -ENODEV;
}
/* if it's NOT a raw write */
if (strcmp(entity_type, "raw")) {
dfu->data.mmc.dev = (second_arg != -1) ? second_arg :
dfu->data.mmc.dev_num;
dfu->data.mmc.part = third_arg;
}
dfu->dev_type = DFU_DEV_MMC;
dfu->get_medium_size = dfu_get_medium_size_mmc;
dfu->read_medium = dfu_read_medium_mmc;
dfu->write_medium = dfu_write_medium_mmc;
dfu->flush_medium = dfu_flush_medium_mmc;
dfu->inited = 0;
dfu->free_entity = dfu_free_entity_mmc;
/* Check if file buffer is ready */
if (!dfu_file_buf) {
dfu_file_buf = memalign(CONFIG_SYS_CACHELINE_SIZE,
CONFIG_SYS_DFU_MAX_FILE_SIZE);
if (!dfu_file_buf) {
pr_err("Could not memalign 0x%x bytes",
CONFIG_SYS_DFU_MAX_FILE_SIZE);
return -ENOMEM;
}
}
return 0;
}