u-boot-brain/drivers/video/rockchip/rk3399_mipi.c
Jagan Teki b52a199e32 arm: rockchip: Add common cru.h
Few of the rockchip family SoC atleast rk3288,
rk3399 are sharing some cru register bits so
adding common code between these SoC families
would require to include both cru include files
that indeed resulting function declarations error.

So, create a common cru include as cru.h then
include the rk3399 arch cru include file and move
the common cru register bit definitions into it.

The rest of rockchip cru files will add it in future.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-30 11:44:01 +08:00

180 lines
4.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
* Author: Eric Gao <eric.gao@rock-chips.com>
*/
#include <common.h>
#include <clk.h>
#include <display.h>
#include <dm.h>
#include <fdtdec.h>
#include <panel.h>
#include <regmap.h>
#include "rk_mipi.h"
#include <syscon.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <dm/uclass-internal.h>
#include <linux/kernel.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/rockchip_mipi_dsi.h>
/* Select mipi dsi source, big or little vop */
static int rk_mipi_dsi_source_select(struct udevice *dev)
{
struct rk_mipi_priv *priv = dev_get_priv(dev);
struct rk3399_grf_regs *grf = priv->grf;
struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);
/* Select the video source */
switch (disp_uc_plat->source_id) {
case VOP_B:
rk_clrsetreg(&grf->soc_con20, GRF_DSI0_VOP_SEL_MASK,
GRF_DSI0_VOP_SEL_B << GRF_DSI0_VOP_SEL_SHIFT);
break;
case VOP_L:
rk_clrsetreg(&grf->soc_con20, GRF_DSI0_VOP_SEL_MASK,
GRF_DSI0_VOP_SEL_L << GRF_DSI0_VOP_SEL_SHIFT);
break;
default:
debug("%s: Invalid VOP id\n", __func__);
return -EINVAL;
}
return 0;
}
/* Setup mipi dphy working mode */
static void rk_mipi_dphy_mode_set(struct udevice *dev)
{
struct rk_mipi_priv *priv = dev_get_priv(dev);
struct rk3399_grf_regs *grf = priv->grf;
int val;
/* Set Controller as TX mode */
val = GRF_DPHY_TX0_RXMODE_DIS << GRF_DPHY_TX0_RXMODE_SHIFT;
rk_clrsetreg(&grf->soc_con22, GRF_DPHY_TX0_RXMODE_MASK, val);
/* Exit tx stop mode */
val |= GRF_DPHY_TX0_TXSTOPMODE_DIS << GRF_DPHY_TX0_TXSTOPMODE_SHIFT;
rk_clrsetreg(&grf->soc_con22, GRF_DPHY_TX0_TXSTOPMODE_MASK, val);
/* Disable turnequest */
val |= GRF_DPHY_TX0_TURNREQUEST_DIS << GRF_DPHY_TX0_TURNREQUEST_SHIFT;
rk_clrsetreg(&grf->soc_con22, GRF_DPHY_TX0_TURNREQUEST_MASK, val);
}
/*
* This function is called by rk_display_init() using rk_mipi_dsi_enable() and
* rk_mipi_phy_enable() to initialize mipi controller and dphy. If success,
* enable backlight.
*/
static int rk_display_enable(struct udevice *dev, int panel_bpp,
const struct display_timing *timing)
{
int ret;
struct rk_mipi_priv *priv = dev_get_priv(dev);
/* Fill the mipi controller parameter */
priv->ref_clk = 24 * MHz;
priv->sys_clk = priv->ref_clk;
priv->pix_clk = timing->pixelclock.typ;
priv->phy_clk = priv->pix_clk * 6;
priv->txbyte_clk = priv->phy_clk / 8;
priv->txesc_clk = 20 * MHz;
/* Select vop port, big or little */
rk_mipi_dsi_source_select(dev);
/* Set mipi dphy work mode */
rk_mipi_dphy_mode_set(dev);
/* Config and enable mipi dsi according to timing */
ret = rk_mipi_dsi_enable(dev, timing);
if (ret) {
debug("%s: rk_mipi_dsi_enable() failed (err=%d)\n",
__func__, ret);
return ret;
}
/* Config and enable mipi phy */
ret = rk_mipi_phy_enable(dev);
if (ret) {
debug("%s: rk_mipi_phy_enable() failed (err=%d)\n",
__func__, ret);
return ret;
}
/* Enable backlight */
ret = panel_enable_backlight(priv->panel);
if (ret) {
debug("%s: panel_enable_backlight() failed (err=%d)\n",
__func__, ret);
return ret;
}
return 0;
}
static int rk_mipi_ofdata_to_platdata(struct udevice *dev)
{
struct rk_mipi_priv *priv = dev_get_priv(dev);
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR_OR_NULL(priv->grf)) {
debug("%s: Get syscon grf failed (ret=%p)\n",
__func__, priv->grf);
return -ENXIO;
}
priv->regs = dev_read_addr(dev);
if (priv->regs == FDT_ADDR_T_NONE) {
debug("%s: Get MIPI dsi address failed\n", __func__);
return -ENXIO;
}
return 0;
}
/*
* Probe function: check panel existence and readingit's timing. Then config
* mipi dsi controller and enable it according to the timing parameter.
*/
static int rk_mipi_probe(struct udevice *dev)
{
int ret;
struct rk_mipi_priv *priv = dev_get_priv(dev);
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
&priv->panel);
if (ret) {
debug("%s: Can not find panel (err=%d)\n", __func__, ret);
return ret;
}
return 0;
}
static const struct dm_display_ops rk_mipi_dsi_ops = {
.read_timing = rk_mipi_read_timing,
.enable = rk_display_enable,
};
static const struct udevice_id rk_mipi_dsi_ids[] = {
{ .compatible = "rockchip,rk3399_mipi_dsi" },
{ }
};
U_BOOT_DRIVER(rk_mipi_dsi) = {
.name = "rk_mipi_dsi",
.id = UCLASS_DISPLAY,
.of_match = rk_mipi_dsi_ids,
.ofdata_to_platdata = rk_mipi_ofdata_to_platdata,
.probe = rk_mipi_probe,
.ops = &rk_mipi_dsi_ops,
.priv_auto_alloc_size = sizeof(struct rk_mipi_priv),
};