Marek Vasut b4a2cdc13e arm: mxs: Increase VDDD voltage to match specification ... According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating Conditions, page 16, the VDDD should be set to 1.55V when the CPU is operating at 454MHz. This is the case in U-Boot, hence increase the VDDD voltage. This fixes instability when performing TFTP transfers. Increase the brownout threshold to 1.4V. The documentation recommends 1.45V setting for the brownout, however, this triggers failure during power block init, so keep the brownout slightly lower. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>		2019-11-03 17:04:16 +01:00
..
arc	NET: DW: fix regression for ARC boards	2019-10-07 13:23:49 -04:00
arm	arm: mxs: Increase VDDD voltage to match specification	2019-11-03 17:04:16 +01:00
m68k	env: Drop environment.h header file where not needed	2019-08-11 16:43:41 -04:00
microblaze	microblaze: Fix tab indentation in start.S	2019-10-24 13:37:03 +02:00
mips	mips: mtmips: select essential drivers in Kconfig	2019-10-25 17:20:44 +02:00
nds32	env: Drop environment.h header file where not needed	2019-08-11 16:43:41 -04:00
nios2	.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore	2018-06-18 14:43:12 -04:00
powerpc	MPC8548: dts: Added PCIe DT node	2019-08-28 13:47:47 +05:30
riscv	RISC-V: Align boot image header with Linux	2019-10-18 09:04:19 +08:00
sandbox	Fix for patman with email addresses containing commas	2019-11-01 09:34:35 -04:00
sh	sh: r2dplus: Fix missing PCI range	2019-09-14 21:28:55 +02:00
x86	binman: x86: Separate out 16-bit reset and init code	2019-10-15 08:40:02 -06:00
xtensa	env: Move env_get() to env.h	2019-08-11 16:43:41 -04:00
.gitignore
Kconfig	sh: r2dplus: Enable OF control	2019-09-02 17:38:43 +02:00