mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-13 00:03:26 +09:00
![Gabriel Huau](/assets/img/avatar_default.png)
Every pin can be configured now from the device tree. A dt-bindings has been added to describe the different property available. Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975 Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Simon Glass <sjg@chromium.org>
32 lines
1.2 KiB
Plaintext
32 lines
1.2 KiB
Plaintext
Intel x86 PINCTRL/GPIO controller
|
|
|
|
Pin-muxing on x86 can be described with a node for the PINCTRL master
|
|
node and a set of child nodes for each pin on the SoC.
|
|
|
|
The PINCTRL master node requires the following properties:
|
|
- compatible : "intel,x86-pinctrl"
|
|
|
|
Pin nodes must be children of the pinctrl master node and can
|
|
contain the following properties:
|
|
- pad-offset - (required) offset in the IOBASE for the pin to configured.
|
|
- gpio-offset - (required) offset in the GPIOBASE for the pin to configured and
|
|
also the bit shift in this register.
|
|
- mode-gpio - (optional) standalone property to force the pin into GPIO mode.
|
|
- mode-func - (optional) function number to assign to the pin. if 'mode-gpio'
|
|
is set, this property will be ignored.
|
|
in case of 'mode-gpio' property set:
|
|
- output-value - (optional) this set the default output value of the GPIO.
|
|
- direction - (optional) this set the direction of the gpio.
|
|
- pull-str - (optional) this set the pull strength of the pin.
|
|
- pull-assign - (optional) this set the pull assignement (up/down) of the pin.
|
|
|
|
Example:
|
|
|
|
pin_usb_host_en0@0 {
|
|
gpio-offset = <0x80 8>;
|
|
pad-offset = <0x260>;
|
|
mode-gpio;
|
|
output-value = <1>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|