mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This version is based on the Marvell U-Boot version with this patch applied as latest patch: Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb device mode" from 2016-07-05. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
1727 lines
59 KiB
C
1727 lines
59 KiB
C
/*
|
|
* Copyright (C) 2015-2016 Marvell International Ltd.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include "comphy.h"
|
|
#include "comphy_hpipe.h"
|
|
#include "sata.h"
|
|
#include "utmi_phy.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define SD_ADDR(base, lane) (base + 0x1000 * lane)
|
|
#define HPIPE_ADDR(base, lane) (SD_ADDR(base, lane) + 0x800)
|
|
#define COMPHY_ADDR(base, lane) (base + 0x28 * lane)
|
|
|
|
struct utmi_phy_data {
|
|
void __iomem *utmi_base_addr;
|
|
void __iomem *usb_cfg_addr;
|
|
void __iomem *utmi_cfg_addr;
|
|
u32 utmi_phy_port;
|
|
};
|
|
|
|
/*
|
|
* For CP-110 we have 2 Selector registers "PHY Selectors",
|
|
* and "PIPE Selectors".
|
|
* PIPE selector include USB and PCIe options.
|
|
* PHY selector include the Ethernet and SATA options, every Ethernet
|
|
* option has different options, for example: serdes lane2 had option
|
|
* Eth_port_0 that include (SGMII0, XAUI0, RXAUI0, KR)
|
|
*/
|
|
struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
|
|
{4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 0 */
|
|
{PHY_TYPE_XAUI2, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
|
|
{4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII3, 0x1}, /* Lane 1 */
|
|
{PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA0, 0x4} } },
|
|
{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */
|
|
{PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1},
|
|
{PHY_TYPE_KR, 0x1}, {PHY_TYPE_SATA0, 0x4} } },
|
|
{8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 3 */
|
|
{PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1},
|
|
{PHY_TYPE_KR, 0x1}, {PHY_TYPE_XAUI1, 0x1},
|
|
{PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
|
|
{7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
|
|
{PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_KR, 0x1},
|
|
{PHY_TYPE_SGMII2, 0x1}, {PHY_TYPE_XAUI2, 0x1} } },
|
|
{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_XAUI1, 0x1}, /* Lane 5 */
|
|
{PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SGMII3, 0x1},
|
|
{PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
|
|
};
|
|
|
|
struct comphy_mux_data cp110_comphy_pipe_mux_data[] = {
|
|
{2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX0, 0x4} } }, /* Lane 0 */
|
|
{4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 1 */
|
|
{PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_USB3_DEVICE, 0x2},
|
|
{PHY_TYPE_PEX0, 0x4} } },
|
|
{3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 2 */
|
|
{PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
|
|
{3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 3 */
|
|
{PHY_TYPE_USB3_HOST1, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
|
|
{4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 4 */
|
|
{PHY_TYPE_USB3_HOST1, 0x1},
|
|
{PHY_TYPE_USB3_DEVICE, 0x2}, {PHY_TYPE_PEX1, 0x4} } },
|
|
{2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX2, 0x4} } }, /* Lane 5 */
|
|
};
|
|
|
|
static u32 polling_with_timeout(void __iomem *addr, u32 val,
|
|
u32 mask, unsigned long usec_timout)
|
|
{
|
|
u32 data;
|
|
|
|
do {
|
|
udelay(1);
|
|
data = readl(addr) & mask;
|
|
} while (data != val && --usec_timout > 0);
|
|
|
|
if (usec_timout == 0)
|
|
return data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
|
|
bool clk_src, void __iomem *hpipe_base,
|
|
void __iomem *comphy_base)
|
|
{
|
|
u32 mask, data, ret = 1;
|
|
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
|
|
void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
|
|
void __iomem *addr;
|
|
u32 pcie_clk = 0; /* set input by default */
|
|
|
|
debug_enter();
|
|
|
|
/*
|
|
* ToDo:
|
|
* Add SAR (Sample-At-Reset) configuration for the PCIe clock
|
|
* direction. SAR code is currently not ported from Marvell
|
|
* U-Boot to mainline version.
|
|
*
|
|
* SerDes Lane 4/5 got the PCIe ref-clock #1,
|
|
* and SerDes Lane 0 got PCIe ref-clock #0
|
|
*/
|
|
debug("PCIe clock = %x\n", pcie_clk);
|
|
debug("PCIe width = %d\n", pcie_width);
|
|
|
|
/* enable PCIe by4 and by2 */
|
|
if (lane == 0) {
|
|
if (pcie_width == 4) {
|
|
reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
|
|
0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET,
|
|
COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK);
|
|
} else if (pcie_width == 2) {
|
|
reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
|
|
0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET,
|
|
COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If PCIe clock is output and clock source from SerDes lane 5,
|
|
* we need to configure the clock-source MUX.
|
|
* By default, the clock source is from lane 4
|
|
*/
|
|
if (pcie_clk && clk_src && (lane == 5)) {
|
|
reg_set((void __iomem *)DFX_DEV_GEN_CTRL12,
|
|
0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET,
|
|
DFX_DEV_GEN_PCIE_CLK_SRC_MASK);
|
|
}
|
|
|
|
debug("stage: RFU configurations - hard reset comphy\n");
|
|
/* RFU configurations - hard reset comphy */
|
|
mask = COMMON_PHY_CFG1_PWR_UP_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
|
|
data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
|
|
mask |= COMMON_PHY_PHY_MODE_MASK;
|
|
data |= 0x0 << COMMON_PHY_PHY_MODE_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* release from hard reset */
|
|
mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
|
|
data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* Wait 1ms - until band gap and ref clock ready */
|
|
mdelay(1);
|
|
/* Start comphy Configuration */
|
|
debug("stage: Comphy configuration\n");
|
|
/* Set PIPE soft reset */
|
|
mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
|
|
data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
|
|
/* Set PHY datapath width mode for V0 */
|
|
mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
|
|
data |= 0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
|
|
/* Set Data bus width USB mode for V0 */
|
|
mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
|
|
data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
|
|
/* Set CORE_CLK output frequency for 250Mhz */
|
|
mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
|
|
data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
|
|
/* Set PLL ready delay for 0x2 */
|
|
data = 0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET;
|
|
mask = HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK;
|
|
if (pcie_width != 1) {
|
|
data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET;
|
|
mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK;
|
|
data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET;
|
|
mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK;
|
|
}
|
|
reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG, data, mask);
|
|
|
|
/* Set PIPE mode interface to PCIe3 - 0x1 & set lane order */
|
|
data = 0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET;
|
|
mask = HPIPE_CLK_SRC_HI_MODE_PIPE_MASK;
|
|
if (pcie_width != 1) {
|
|
mask |= HPIPE_CLK_SRC_HI_LANE_STRT_MASK;
|
|
mask |= HPIPE_CLK_SRC_HI_LANE_MASTER_MASK;
|
|
mask |= HPIPE_CLK_SRC_HI_LANE_BREAK_MASK;
|
|
if (lane == 0) {
|
|
data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET;
|
|
data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET;
|
|
} else if (lane == (pcie_width - 1)) {
|
|
data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET;
|
|
}
|
|
}
|
|
reg_set(hpipe_addr + HPIPE_CLK_SRC_HI_REG, data, mask);
|
|
/* Config update polarity equalization */
|
|
reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG1_REG,
|
|
0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET,
|
|
HPIPE_CFG_UPDATE_POLARITY_MASK);
|
|
/* Set PIPE version 4 to mode enable */
|
|
reg_set(hpipe_addr + HPIPE_DFE_CTRL_28_REG,
|
|
0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET,
|
|
HPIPE_DFE_CTRL_28_PIPE4_MASK);
|
|
/* TODO: check if pcie clock is output/input - for bringup use input*/
|
|
/* Enable PIN clock 100M_125M */
|
|
mask = 0;
|
|
data = 0;
|
|
/* Only if clock is output, configure the clock-source mux */
|
|
if (pcie_clk) {
|
|
mask |= HPIPE_MISC_CLK100M_125M_MASK;
|
|
data |= 0x1 << HPIPE_MISC_CLK100M_125M_OFFSET;
|
|
}
|
|
/*
|
|
* Set PIN_TXDCLK_2X Clock Frequency Selection for outputs 500MHz
|
|
* clock
|
|
*/
|
|
mask |= HPIPE_MISC_TXDCLK_2X_MASK;
|
|
data |= 0x0 << HPIPE_MISC_TXDCLK_2X_OFFSET;
|
|
/* Enable 500MHz Clock */
|
|
mask |= HPIPE_MISC_CLK500_EN_MASK;
|
|
data |= 0x1 << HPIPE_MISC_CLK500_EN_OFFSET;
|
|
if (pcie_clk) { /* output */
|
|
/* Set reference clock comes from group 1 */
|
|
mask |= HPIPE_MISC_REFCLK_SEL_MASK;
|
|
data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
|
|
} else {
|
|
/* Set reference clock comes from group 2 */
|
|
mask |= HPIPE_MISC_REFCLK_SEL_MASK;
|
|
data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET;
|
|
}
|
|
reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
|
|
if (pcie_clk) { /* output */
|
|
/* Set reference frequcency select - 0x2 for 25MHz*/
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
} else {
|
|
/* Set reference frequcency select - 0x0 for 100MHz*/
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x0 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
}
|
|
/* Set PHY mode to PCIe */
|
|
mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
|
|
data |= 0x3 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
|
|
|
|
/* ref clock alignment */
|
|
if (pcie_width != 1) {
|
|
mask = HPIPE_LANE_ALIGN_OFF_MASK;
|
|
data = 0x0 << HPIPE_LANE_ALIGN_OFF_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_LANE_ALIGN_REG, data, mask);
|
|
}
|
|
|
|
/*
|
|
* Set the amount of time spent in the LoZ state - set for 0x7 only if
|
|
* the PCIe clock is output
|
|
*/
|
|
if (pcie_clk) {
|
|
reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL,
|
|
0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET,
|
|
HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK);
|
|
}
|
|
|
|
/* Set Maximal PHY Generation Setting(8Gbps) */
|
|
mask = HPIPE_INTERFACE_GEN_MAX_MASK;
|
|
data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;
|
|
/* Set Link Train Mode (Tx training control pins are used) */
|
|
mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK;
|
|
data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_INTERFACE_REG, data, mask);
|
|
|
|
/* Set Idle_sync enable */
|
|
mask = HPIPE_PCIE_IDLE_SYNC_MASK;
|
|
data = 0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET;
|
|
/* Select bits for PCIE Gen3(32bit) */
|
|
mask |= HPIPE_PCIE_SEL_BITS_MASK;
|
|
data |= 0x2 << HPIPE_PCIE_SEL_BITS_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PCIE_REG0, data, mask);
|
|
|
|
/* Enable Tx_adapt_g1 */
|
|
mask = HPIPE_TX_TRAIN_CTRL_G1_MASK;
|
|
data = 0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET;
|
|
/* Enable Tx_adapt_gn1 */
|
|
mask |= HPIPE_TX_TRAIN_CTRL_GN1_MASK;
|
|
data |= 0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET;
|
|
/* Disable Tx_adapt_g0 */
|
|
mask |= HPIPE_TX_TRAIN_CTRL_G0_MASK;
|
|
data |= 0x0 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask);
|
|
|
|
/* Set reg_tx_train_chk_init */
|
|
mask = HPIPE_TX_TRAIN_CHK_INIT_MASK;
|
|
data = 0x0 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET;
|
|
/* Enable TX_COE_FM_PIN_PCIE3_EN */
|
|
mask |= HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK;
|
|
data |= 0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
|
|
|
|
debug("stage: TRx training parameters\n");
|
|
/* Set Preset sweep configurations */
|
|
mask = HPIPE_TX_TX_STATUS_CHECK_MODE_MASK;
|
|
data = 0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET;
|
|
|
|
mask |= HPIPE_TX_NUM_OF_PRESET_MASK;
|
|
data |= 0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET;
|
|
|
|
mask |= HPIPE_TX_SWEEP_PRESET_EN_MASK;
|
|
data |= 0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_11_REG, data, mask);
|
|
|
|
/* Tx train start configuration */
|
|
mask = HPIPE_TX_TRAIN_START_SQ_EN_MASK;
|
|
data = 0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET;
|
|
|
|
mask |= HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK;
|
|
data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET;
|
|
|
|
mask |= HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK;
|
|
data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET;
|
|
|
|
mask |= HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK;
|
|
data |= 0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
|
|
|
|
/* Enable Tx train P2P */
|
|
mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
|
|
data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
|
|
|
|
/* Configure Tx train timeout */
|
|
mask = HPIPE_TRX_TRAIN_TIMER_MASK;
|
|
data = 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_4_REG, data, mask);
|
|
|
|
/* Disable G0/G1/GN1 adaptation */
|
|
mask = HPIPE_TX_TRAIN_CTRL_G1_MASK | HPIPE_TX_TRAIN_CTRL_GN1_MASK
|
|
| HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
|
|
data = 0;
|
|
reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask);
|
|
|
|
/* Disable DTL frequency loop */
|
|
mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
|
|
data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
|
|
|
|
/* Configure G3 DFE */
|
|
mask = HPIPE_G3_DFE_RES_MASK;
|
|
data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
|
|
|
|
/* Force DFE resolution (use GEN table value) */
|
|
mask = HPIPE_DFE_RES_FORCE_MASK;
|
|
data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
|
|
|
|
/* Configure initial and final coefficient value for receiver */
|
|
mask = HPIPE_G3_RX_SELMUPI_MASK;
|
|
data = 0x1 << HPIPE_G3_RX_SELMUPI_OFFSET;
|
|
|
|
mask |= HPIPE_G3_RX_SELMUPF_MASK;
|
|
data |= 0x1 << HPIPE_G3_RX_SELMUPF_OFFSET;
|
|
|
|
mask |= HPIPE_G3_SETTING_BIT_MASK;
|
|
data |= 0x0 << HPIPE_G3_SETTING_BIT_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G3_SETTINGS_1_REG, data, mask);
|
|
|
|
/* Trigger sampler enable pulse */
|
|
mask = HPIPE_SMAPLER_MASK;
|
|
data = 0x1 << HPIPE_SMAPLER_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
|
|
udelay(5);
|
|
reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, 0, mask);
|
|
|
|
/* FFE resistor tuning for different bandwidth */
|
|
mask = HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
|
|
data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
|
|
|
|
mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
|
|
data |= 0x1 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
|
|
|
|
/* Set phy in root complex mode */
|
|
mask = HPIPE_CFG_PHY_RC_EP_MASK;
|
|
data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask);
|
|
|
|
debug("stage: Comphy power up\n");
|
|
|
|
/*
|
|
* For PCIe by4 or by2 - release from reset only after finish to
|
|
* configure all lanes
|
|
*/
|
|
if ((pcie_width == 1) || (lane == (pcie_width - 1))) {
|
|
u32 i, start_lane, end_lane;
|
|
|
|
if (pcie_width != 1) {
|
|
/* allows writing to all lanes in one write */
|
|
reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
|
|
0x0 <<
|
|
COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET,
|
|
COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK);
|
|
start_lane = 0;
|
|
end_lane = pcie_width;
|
|
|
|
/*
|
|
* Release from PIPE soft reset
|
|
* for PCIe by4 or by2 - release from soft reset
|
|
* all lanes - can't use read modify write
|
|
*/
|
|
reg_set(HPIPE_ADDR(hpipe_base, 0) +
|
|
HPIPE_RST_CLK_CTRL_REG, 0x24, 0xffffffff);
|
|
} else {
|
|
start_lane = lane;
|
|
end_lane = lane + 1;
|
|
|
|
/*
|
|
* Release from PIPE soft reset
|
|
* for PCIe by4 or by2 - release from soft reset
|
|
* all lanes
|
|
*/
|
|
reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG,
|
|
0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET,
|
|
HPIPE_RST_CLK_CTRL_PIPE_RST_MASK);
|
|
}
|
|
|
|
|
|
if (pcie_width != 1) {
|
|
/* disable writing to all lanes with one write */
|
|
reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
|
|
0x3210 <<
|
|
COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET,
|
|
COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK);
|
|
}
|
|
|
|
debug("stage: Check PLL\n");
|
|
/* Read lane status */
|
|
for (i = start_lane; i < end_lane; i++) {
|
|
addr = HPIPE_ADDR(hpipe_base, i) +
|
|
HPIPE_LANE_STATUS1_REG;
|
|
data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 15000);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
hpipe_addr + HPIPE_LANE_STATUS1_REG,
|
|
data);
|
|
error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
|
|
ret = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
static int comphy_usb3_power_up(u32 lane, void __iomem *hpipe_base,
|
|
void __iomem *comphy_base)
|
|
{
|
|
u32 mask, data, ret = 1;
|
|
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
|
|
void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
|
|
void __iomem *addr;
|
|
|
|
debug_enter();
|
|
debug("stage: RFU configurations - hard reset comphy\n");
|
|
/* RFU configurations - hard reset comphy */
|
|
mask = COMMON_PHY_CFG1_PWR_UP_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
|
|
data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
|
|
mask |= COMMON_PHY_PHY_MODE_MASK;
|
|
data |= 0x1 << COMMON_PHY_PHY_MODE_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* release from hard reset */
|
|
mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
|
|
data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* Wait 1ms - until band gap and ref clock ready */
|
|
mdelay(1);
|
|
|
|
/* Start comphy Configuration */
|
|
debug("stage: Comphy configuration\n");
|
|
/* Set PIPE soft reset */
|
|
mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
|
|
data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
|
|
/* Set PHY datapath width mode for V0 */
|
|
mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
|
|
data |= 0x0 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
|
|
/* Set Data bus width USB mode for V0 */
|
|
mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
|
|
data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
|
|
/* Set CORE_CLK output frequency for 250Mhz */
|
|
mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
|
|
data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
|
|
/* Set PLL ready delay for 0x2 */
|
|
reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG,
|
|
0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET,
|
|
HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK);
|
|
/* Set reference clock to come from group 1 - 25Mhz */
|
|
reg_set(hpipe_addr + HPIPE_MISC_REG,
|
|
0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
|
|
HPIPE_MISC_REFCLK_SEL_MASK);
|
|
/* Set reference frequcency select - 0x2 */
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
/* Set PHY mode to USB - 0x5 */
|
|
mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
|
|
data |= 0x5 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
|
|
/* Set the amount of time spent in the LoZ state - set for 0x7 */
|
|
reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL,
|
|
0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET,
|
|
HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK);
|
|
/* Set max PHY generation setting - 5Gbps */
|
|
reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
|
|
0x1 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
|
|
HPIPE_INTERFACE_GEN_MAX_MASK);
|
|
/* Set select data width 20Bit (SEL_BITS[2:0]) */
|
|
reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
|
|
0x1 << HPIPE_LOOPBACK_SEL_OFFSET,
|
|
HPIPE_LOOPBACK_SEL_MASK);
|
|
/* select de-emphasize 3.5db */
|
|
reg_set(hpipe_addr + HPIPE_LANE_CONFIG0_REG,
|
|
0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET,
|
|
HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK);
|
|
/* override tx margining from the MAC */
|
|
reg_set(hpipe_addr + HPIPE_TST_MODE_CTRL_REG,
|
|
0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET,
|
|
HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK);
|
|
|
|
/* Start analog paramters from ETP(HW) */
|
|
debug("stage: Analog paramters from ETP(HW)\n");
|
|
/* Set Pin DFE_PAT_DIS -> Bit[1]: PIN_DFE_PAT_DIS = 0x0 */
|
|
mask = HPIPE_LANE_CFG4_DFE_CTRL_MASK;
|
|
data = 0x1 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET;
|
|
/* Set Override PHY DFE control pins for 0x1 */
|
|
mask |= HPIPE_LANE_CFG4_DFE_OVER_MASK;
|
|
data |= 0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET;
|
|
/* Set Spread Spectrum Clock Enable fot 0x1 */
|
|
mask |= HPIPE_LANE_CFG4_SSC_CTRL_MASK;
|
|
data |= 0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
|
|
/* End of analog parameters */
|
|
|
|
debug("stage: Comphy power up\n");
|
|
/* Release from PIPE soft reset */
|
|
reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG,
|
|
0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET,
|
|
HPIPE_RST_CLK_CTRL_PIPE_RST_MASK);
|
|
|
|
/* wait 15ms - for comphy calibration done */
|
|
debug("stage: Check PLL\n");
|
|
/* Read lane status */
|
|
addr = hpipe_addr + HPIPE_LANE_STATUS1_REG;
|
|
data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 15000);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
|
|
error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
|
|
ret = 0;
|
|
}
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
|
|
void __iomem *comphy_base, int comphy_index)
|
|
{
|
|
u32 mask, data, i, ret = 1;
|
|
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
|
|
void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
|
|
void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
|
|
void __iomem *addr;
|
|
void __iomem *sata_base = NULL;
|
|
int sata_node = -1; /* Set to -1 in order to read the first sata node */
|
|
|
|
debug_enter();
|
|
|
|
/*
|
|
* Assumption - each CP has only one SATA controller
|
|
* Calling fdt_node_offset_by_compatible first time (with sata_node = -1
|
|
* will return the first node always.
|
|
* In order to parse each CPs SATA node, fdt_node_offset_by_compatible
|
|
* must be called again (according to the CP id)
|
|
*/
|
|
for (i = 0; i < (comphy_index + 1); i++)
|
|
sata_node = fdt_node_offset_by_compatible(
|
|
gd->fdt_blob, sata_node, "marvell,armada-8k-ahci");
|
|
|
|
if (sata_node == 0) {
|
|
error("SATA node not found in FDT\n");
|
|
return 0;
|
|
}
|
|
|
|
sata_base = (void __iomem *)fdtdec_get_addr_size_auto_noparent(
|
|
gd->fdt_blob, sata_node, "reg", 0, NULL, true);
|
|
if (sata_base == NULL) {
|
|
error("SATA address not found in FDT\n");
|
|
return 0;
|
|
}
|
|
|
|
debug("SATA address found in FDT %p\n", sata_base);
|
|
|
|
debug("stage: MAC configuration - power down comphy\n");
|
|
/*
|
|
* MAC configuration powe down comphy use indirect address for
|
|
* vendor spesific SATA control register
|
|
*/
|
|
reg_set(sata_base + SATA3_VENDOR_ADDRESS,
|
|
SATA_CONTROL_REG << SATA3_VENDOR_ADDR_OFSSET,
|
|
SATA3_VENDOR_ADDR_MASK);
|
|
/* SATA 0 power down */
|
|
mask = SATA3_CTRL_SATA0_PD_MASK;
|
|
data = 0x1 << SATA3_CTRL_SATA0_PD_OFFSET;
|
|
/* SATA 1 power down */
|
|
mask |= SATA3_CTRL_SATA1_PD_MASK;
|
|
data |= 0x1 << SATA3_CTRL_SATA1_PD_OFFSET;
|
|
/* SATA SSU disable */
|
|
mask |= SATA3_CTRL_SATA1_ENABLE_MASK;
|
|
data |= 0x0 << SATA3_CTRL_SATA1_ENABLE_OFFSET;
|
|
/* SATA port 1 disable */
|
|
mask |= SATA3_CTRL_SATA_SSU_MASK;
|
|
data |= 0x0 << SATA3_CTRL_SATA_SSU_OFFSET;
|
|
reg_set(sata_base + SATA3_VENDOR_DATA, data, mask);
|
|
|
|
debug("stage: RFU configurations - hard reset comphy\n");
|
|
/* RFU configurations - hard reset comphy */
|
|
mask = COMMON_PHY_CFG1_PWR_UP_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* Set select data width 40Bit - SATA mode only */
|
|
reg_set(comphy_addr + COMMON_PHY_CFG6_REG,
|
|
0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET,
|
|
COMMON_PHY_CFG6_IF_40_SEL_MASK);
|
|
|
|
/* release from hard reset in SD external */
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
/* Wait 1ms - until band gap and ref clock ready */
|
|
mdelay(1);
|
|
|
|
debug("stage: Comphy configuration\n");
|
|
/* Start comphy Configuration */
|
|
/* Set reference clock to comes from group 1 - choose 25Mhz */
|
|
reg_set(hpipe_addr + HPIPE_MISC_REG,
|
|
0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
|
|
HPIPE_MISC_REFCLK_SEL_MASK);
|
|
/* Reference frequency select set 1 (for SATA = 25Mhz) */
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
/* PHY mode select (set SATA = 0x0 */
|
|
mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
|
|
data |= 0x0 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
|
|
/* Set max PHY generation setting - 6Gbps */
|
|
reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
|
|
0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
|
|
HPIPE_INTERFACE_GEN_MAX_MASK);
|
|
/* Set select data width 40Bit (SEL_BITS[2:0]) */
|
|
reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
|
|
0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
|
|
|
|
debug("stage: Analog paramters from ETP(HW)\n");
|
|
/*
|
|
* TODO: Set analog paramters from ETP(HW) - for now use the
|
|
* default datas
|
|
*/
|
|
|
|
/* DFE reset sequence */
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
|
|
0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
|
|
HPIPE_PWR_CTR_RST_DFE_MASK);
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
|
|
0x0 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
|
|
HPIPE_PWR_CTR_RST_DFE_MASK);
|
|
/* SW reset for interupt logic */
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
|
|
0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
|
|
HPIPE_PWR_CTR_SFT_RST_MASK);
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
|
|
0x0 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
|
|
HPIPE_PWR_CTR_SFT_RST_MASK);
|
|
|
|
debug("stage: Comphy power up\n");
|
|
/*
|
|
* MAC configuration power up comphy - power up PLL/TX/RX
|
|
* use indirect address for vendor spesific SATA control register
|
|
*/
|
|
reg_set(sata_base + SATA3_VENDOR_ADDRESS,
|
|
SATA_CONTROL_REG << SATA3_VENDOR_ADDR_OFSSET,
|
|
SATA3_VENDOR_ADDR_MASK);
|
|
/* SATA 0 power up */
|
|
mask = SATA3_CTRL_SATA0_PD_MASK;
|
|
data = 0x0 << SATA3_CTRL_SATA0_PD_OFFSET;
|
|
/* SATA 1 power up */
|
|
mask |= SATA3_CTRL_SATA1_PD_MASK;
|
|
data |= 0x0 << SATA3_CTRL_SATA1_PD_OFFSET;
|
|
/* SATA SSU enable */
|
|
mask |= SATA3_CTRL_SATA1_ENABLE_MASK;
|
|
data |= 0x1 << SATA3_CTRL_SATA1_ENABLE_OFFSET;
|
|
/* SATA port 1 enable */
|
|
mask |= SATA3_CTRL_SATA_SSU_MASK;
|
|
data |= 0x1 << SATA3_CTRL_SATA_SSU_OFFSET;
|
|
reg_set(sata_base + SATA3_VENDOR_DATA, data, mask);
|
|
|
|
/* MBUS request size and interface select register */
|
|
reg_set(sata_base + SATA3_VENDOR_ADDRESS,
|
|
SATA_MBUS_SIZE_SELECT_REG << SATA3_VENDOR_ADDR_OFSSET,
|
|
SATA3_VENDOR_ADDR_MASK);
|
|
/* Mbus regret enable */
|
|
reg_set(sata_base + SATA3_VENDOR_DATA,
|
|
0x1 << SATA_MBUS_REGRET_EN_OFFSET, SATA_MBUS_REGRET_EN_MASK);
|
|
|
|
debug("stage: Check PLL\n");
|
|
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_PLL_TX_MASK &
|
|
SD_EXTERNAL_STATUS0_PLL_RX_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 15000);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n",
|
|
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK),
|
|
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK));
|
|
ret = 0;
|
|
}
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
static int comphy_sgmii_power_up(u32 lane, u32 sgmii_speed,
|
|
void __iomem *hpipe_base,
|
|
void __iomem *comphy_base)
|
|
{
|
|
u32 mask, data, ret = 1;
|
|
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
|
|
void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
|
|
void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
|
|
void __iomem *addr;
|
|
|
|
debug_enter();
|
|
debug("stage: RFU configurations - hard reset comphy\n");
|
|
/* RFU configurations - hard reset comphy */
|
|
mask = COMMON_PHY_CFG1_PWR_UP_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
|
|
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
|
|
if (sgmii_speed == PHY_SPEED_1_25G) {
|
|
data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
|
|
data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
|
|
} else {
|
|
/* 3.125G */
|
|
data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
|
|
data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
|
|
}
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
|
|
data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
|
|
data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
|
|
data |= 1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
|
|
|
|
/* release from hard reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
/* release from hard reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
|
|
/* Wait 1ms - until band gap and ref clock ready */
|
|
mdelay(1);
|
|
|
|
/* Start comphy Configuration */
|
|
debug("stage: Comphy configuration\n");
|
|
/* set reference clock */
|
|
mask = HPIPE_MISC_REFCLK_SEL_MASK;
|
|
data = 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
|
|
/* Power and PLL Control */
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
|
|
data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
|
|
/* Loopback register */
|
|
mask = HPIPE_LOOPBACK_SEL_MASK;
|
|
data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
|
|
/* rx control 1 */
|
|
mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
|
|
data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
|
|
mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
|
|
data |= 0x0 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
|
|
/* DTL Control */
|
|
mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
|
|
data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
|
|
|
|
/* Set analog paramters from ETP(HW) - for now use the default datas */
|
|
debug("stage: Analog paramters from ETP(HW)\n");
|
|
|
|
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
|
|
0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
|
|
HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
|
|
|
|
debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
|
|
/* SERDES External Configuration */
|
|
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
|
|
|
|
/* check PLL rx & tx ready */
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
|
|
SD_EXTERNAL_STATUS0_PLL_TX_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 15000);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
|
|
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
|
|
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
|
|
ret = 0;
|
|
}
|
|
|
|
/* RX init */
|
|
mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
/* check that RX init done */
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 100);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
|
|
ret = 0;
|
|
}
|
|
|
|
debug("stage: RF Reset\n");
|
|
/* RF Reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
|
|
void __iomem *comphy_base)
|
|
{
|
|
u32 mask, data, ret = 1;
|
|
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
|
|
void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
|
|
void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
|
|
void __iomem *addr;
|
|
|
|
debug_enter();
|
|
debug("stage: RFU configurations - hard reset comphy\n");
|
|
/* RFU configurations - hard reset comphy */
|
|
mask = COMMON_PHY_CFG1_PWR_UP_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
|
|
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
|
|
data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
|
|
data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
|
|
data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
|
|
data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
|
|
data |= 0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
|
|
|
|
/* release from hard reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
|
|
/* Wait 1ms - until band gap and ref clock ready */
|
|
mdelay(1);
|
|
|
|
/* Start comphy Configuration */
|
|
debug("stage: Comphy configuration\n");
|
|
/* set reference clock */
|
|
mask = HPIPE_MISC_ICP_FORCE_MASK;
|
|
data = 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
|
|
mask |= HPIPE_MISC_REFCLK_SEL_MASK;
|
|
data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
|
|
/* Power and PLL Control */
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
|
|
data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
|
|
/* Loopback register */
|
|
mask = HPIPE_LOOPBACK_SEL_MASK;
|
|
data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
|
|
/* rx control 1 */
|
|
mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
|
|
data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
|
|
mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
|
|
data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
|
|
/* DTL Control */
|
|
mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
|
|
data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
|
|
|
|
/* Set analog paramters from ETP(HW) */
|
|
debug("stage: Analog paramters from ETP(HW)\n");
|
|
/* SERDES External Configuration 2 */
|
|
mask = SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
|
|
/* 0x7-DFE Resolution control */
|
|
mask = HPIPE_DFE_RES_FORCE_MASK;
|
|
data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
|
|
/* 0xd-G1_Setting_0 */
|
|
mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
|
|
data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
|
|
mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
|
|
data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
|
|
/* Genration 1 setting 2 (G1_Setting_2) */
|
|
mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
|
|
data = 0x0 << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
|
|
mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
|
|
data |= 0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
|
|
/* Transmitter Slew Rate Control register (tx_reg1) */
|
|
mask = HPIPE_TX_REG1_TX_EMPH_RES_MASK;
|
|
data = 0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET;
|
|
mask |= HPIPE_TX_REG1_SLC_EN_MASK;
|
|
data |= 0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_TX_REG1_REG, data, mask);
|
|
/* Impedance Calibration Control register (cal_reg1) */
|
|
mask = HPIPE_CAL_REG_1_EXT_TXIMP_MASK;
|
|
data = 0xe << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
|
|
mask |= HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK;
|
|
data |= 0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_CAL_REG1_REG, data, mask);
|
|
/* Generation 1 Setting 5 (g1_setting_5) */
|
|
mask = HPIPE_G1_SETTING_5_G1_ICP_MASK;
|
|
data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask);
|
|
/* 0xE-G1_Setting_1 */
|
|
mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
|
|
data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
|
|
mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
|
|
data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
|
|
mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
|
|
data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
|
|
/* 0xA-DFE_Reg3 */
|
|
mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
|
|
data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
|
|
mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
|
|
data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
|
|
|
|
/* 0x111-G1_Setting_4 */
|
|
mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
|
|
data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
|
|
/* Genration 1 setting 3 (G1_Setting_3) */
|
|
mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK;
|
|
data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
|
|
|
|
debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
|
|
/* SERDES External Configuration */
|
|
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
|
|
|
|
|
|
/* check PLL rx & tx ready */
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
|
|
SD_EXTERNAL_STATUS0_PLL_TX_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 15000);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
|
|
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
|
|
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
|
|
ret = 0;
|
|
}
|
|
|
|
/* RX init */
|
|
mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
|
|
/* check that RX init done */
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 100);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
|
|
ret = 0;
|
|
}
|
|
|
|
debug("stage: RF Reset\n");
|
|
/* RF Reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
static int comphy_rxauii_power_up(u32 lane, void __iomem *hpipe_base,
|
|
void __iomem *comphy_base)
|
|
{
|
|
u32 mask, data, ret = 1;
|
|
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
|
|
void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane);
|
|
void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane);
|
|
void __iomem *addr;
|
|
|
|
debug_enter();
|
|
debug("stage: RFU configurations - hard reset comphy\n");
|
|
/* RFU configurations - hard reset comphy */
|
|
mask = COMMON_PHY_CFG1_PWR_UP_MASK;
|
|
data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
|
|
mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
|
|
data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
|
|
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
|
|
|
|
if (lane == 2) {
|
|
reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
|
|
0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET,
|
|
COMMON_PHY_SD_CTRL1_RXAUI0_MASK);
|
|
}
|
|
if (lane == 4) {
|
|
reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
|
|
0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET,
|
|
COMMON_PHY_SD_CTRL1_RXAUI1_MASK);
|
|
}
|
|
|
|
/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
|
|
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
|
|
data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
|
|
data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
|
|
|
|
/* release from hard reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
|
|
data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
/* Wait 1ms - until band gap and ref clock ready */
|
|
mdelay(1);
|
|
|
|
/* Start comphy Configuration */
|
|
debug("stage: Comphy configuration\n");
|
|
/* set reference clock */
|
|
reg_set(hpipe_addr + HPIPE_MISC_REG,
|
|
0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
|
|
HPIPE_MISC_REFCLK_SEL_MASK);
|
|
/* Power and PLL Control */
|
|
mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
|
|
data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
|
|
mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
|
|
data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
|
|
/* Loopback register */
|
|
reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
|
|
0x1 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
|
|
/* rx control 1 */
|
|
mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
|
|
data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
|
|
mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
|
|
data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
|
|
/* DTL Control */
|
|
reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG,
|
|
0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET,
|
|
HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK);
|
|
|
|
/* Set analog paramters from ETP(HW) */
|
|
debug("stage: Analog paramters from ETP(HW)\n");
|
|
/* SERDES External Configuration 2 */
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG,
|
|
0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET,
|
|
SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK);
|
|
/* 0x7-DFE Resolution control */
|
|
reg_set(hpipe_addr + HPIPE_DFE_REG0, 0x1 << HPIPE_DFE_RES_FORCE_OFFSET,
|
|
HPIPE_DFE_RES_FORCE_MASK);
|
|
/* 0xd-G1_Setting_0 */
|
|
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
|
|
0xd << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
|
|
HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
|
|
/* 0xE-G1_Setting_1 */
|
|
mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
|
|
data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
|
|
mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
|
|
data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
|
|
mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
|
|
data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
|
|
/* 0xA-DFE_Reg3 */
|
|
mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
|
|
data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
|
|
mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
|
|
data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
|
|
|
|
/* 0x111-G1_Setting_4 */
|
|
mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
|
|
data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
|
|
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
|
|
|
|
debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
|
|
/* SERDES External Configuration */
|
|
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
|
|
data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
|
|
|
|
|
|
/* check PLL rx & tx ready */
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
|
|
SD_EXTERNAL_STATUS0_PLL_TX_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 15000);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
|
|
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
|
|
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
|
|
ret = 0;
|
|
}
|
|
|
|
/* RX init */
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG,
|
|
0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET,
|
|
SD_EXTERNAL_CONFIG1_RX_INIT_MASK);
|
|
|
|
/* check that RX init done */
|
|
addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
|
|
data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 100);
|
|
if (data != 0) {
|
|
debug("Read from reg = %p - value = 0x%x\n",
|
|
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
|
|
error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
|
|
ret = 0;
|
|
}
|
|
|
|
debug("stage: RF Reset\n");
|
|
/* RF Reset */
|
|
mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
|
|
data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
|
|
mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
|
|
data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
|
|
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
static void comphy_utmi_power_down(u32 utmi_index, void __iomem *utmi_base_addr,
|
|
void __iomem *usb_cfg_addr,
|
|
void __iomem *utmi_cfg_addr,
|
|
u32 utmi_phy_port)
|
|
{
|
|
u32 mask, data;
|
|
|
|
debug_enter();
|
|
debug("stage: UTMI %d - Power down transceiver (power down Phy), Power down PLL, and SuspendDM\n",
|
|
utmi_index);
|
|
/* Power down UTMI PHY */
|
|
reg_set(utmi_cfg_addr, 0x0 << UTMI_PHY_CFG_PU_OFFSET,
|
|
UTMI_PHY_CFG_PU_MASK);
|
|
|
|
/*
|
|
* If UTMI connected to USB Device, configure mux prior to PHY init
|
|
* (Device can be connected to UTMI0 or to UTMI1)
|
|
*/
|
|
if (utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) {
|
|
debug("stage: UTMI %d - Enable Device mode and configure UTMI mux\n",
|
|
utmi_index);
|
|
/* USB3 Device UTMI enable */
|
|
mask = UTMI_USB_CFG_DEVICE_EN_MASK;
|
|
data = 0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET;
|
|
/* USB3 Device UTMI MUX */
|
|
mask |= UTMI_USB_CFG_DEVICE_MUX_MASK;
|
|
data |= utmi_index << UTMI_USB_CFG_DEVICE_MUX_OFFSET;
|
|
reg_set(usb_cfg_addr, data, mask);
|
|
}
|
|
|
|
/* Set Test suspendm mode */
|
|
mask = UTMI_CTRL_STATUS0_SUSPENDM_MASK;
|
|
data = 0x1 << UTMI_CTRL_STATUS0_SUSPENDM_OFFSET;
|
|
/* Enable Test UTMI select */
|
|
mask |= UTMI_CTRL_STATUS0_TEST_SEL_MASK;
|
|
data |= 0x1 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET;
|
|
reg_set(utmi_base_addr + UTMI_CTRL_STATUS0_REG, data, mask);
|
|
|
|
/* Wait for UTMI power down */
|
|
mdelay(1);
|
|
|
|
debug_exit();
|
|
return;
|
|
}
|
|
|
|
static void comphy_utmi_phy_config(u32 utmi_index, void __iomem *utmi_base_addr,
|
|
void __iomem *usb_cfg_addr,
|
|
void __iomem *utmi_cfg_addr,
|
|
u32 utmi_phy_port)
|
|
{
|
|
u32 mask, data;
|
|
|
|
debug_exit();
|
|
debug("stage: Configure UTMI PHY %d registers\n", utmi_index);
|
|
/* Reference Clock Divider Select */
|
|
mask = UTMI_PLL_CTRL_REFDIV_MASK;
|
|
data = 0x5 << UTMI_PLL_CTRL_REFDIV_OFFSET;
|
|
/* Feedback Clock Divider Select - 90 for 25Mhz*/
|
|
mask |= UTMI_PLL_CTRL_FBDIV_MASK;
|
|
data |= 0x60 << UTMI_PLL_CTRL_FBDIV_OFFSET;
|
|
/* Select LPFR - 0x0 for 25Mhz/5=5Mhz*/
|
|
mask |= UTMI_PLL_CTRL_SEL_LPFR_MASK;
|
|
data |= 0x0 << UTMI_PLL_CTRL_SEL_LPFR_OFFSET;
|
|
reg_set(utmi_base_addr + UTMI_PLL_CTRL_REG, data, mask);
|
|
|
|
/* Impedance Calibration Threshold Setting */
|
|
reg_set(utmi_base_addr + UTMI_CALIB_CTRL_REG,
|
|
0x6 << UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET,
|
|
UTMI_CALIB_CTRL_IMPCAL_VTH_MASK);
|
|
|
|
/* Set LS TX driver strength coarse control */
|
|
mask = UTMI_TX_CH_CTRL_DRV_EN_LS_MASK;
|
|
data = 0x3 << UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET;
|
|
/* Set LS TX driver fine adjustment */
|
|
mask |= UTMI_TX_CH_CTRL_IMP_SEL_LS_MASK;
|
|
data |= 0x3 << UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET;
|
|
reg_set(utmi_base_addr + UTMI_TX_CH_CTRL_REG, data, mask);
|
|
|
|
/* Enable SQ */
|
|
mask = UTMI_RX_CH_CTRL0_SQ_DET_MASK;
|
|
data = 0x0 << UTMI_RX_CH_CTRL0_SQ_DET_OFFSET;
|
|
/* Enable analog squelch detect */
|
|
mask |= UTMI_RX_CH_CTRL0_SQ_ANA_DTC_MASK;
|
|
data |= 0x1 << UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET;
|
|
reg_set(utmi_base_addr + UTMI_RX_CH_CTRL0_REG, data, mask);
|
|
|
|
/* Set External squelch calibration number */
|
|
mask = UTMI_RX_CH_CTRL1_SQ_AMP_CAL_MASK;
|
|
data = 0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET;
|
|
/* Enable the External squelch calibration */
|
|
mask |= UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_MASK;
|
|
data |= 0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET;
|
|
reg_set(utmi_base_addr + UTMI_RX_CH_CTRL1_REG, data, mask);
|
|
|
|
/* Set Control VDAT Reference Voltage - 0.325V */
|
|
mask = UTMI_CHGDTC_CTRL_VDAT_MASK;
|
|
data = 0x1 << UTMI_CHGDTC_CTRL_VDAT_OFFSET;
|
|
/* Set Control VSRC Reference Voltage - 0.6V */
|
|
mask |= UTMI_CHGDTC_CTRL_VSRC_MASK;
|
|
data |= 0x1 << UTMI_CHGDTC_CTRL_VSRC_OFFSET;
|
|
reg_set(utmi_base_addr + UTMI_CHGDTC_CTRL_REG, data, mask);
|
|
|
|
debug_exit();
|
|
return;
|
|
}
|
|
|
|
static int comphy_utmi_power_up(u32 utmi_index, void __iomem *utmi_base_addr,
|
|
void __iomem *usb_cfg_addr,
|
|
void __iomem *utmi_cfg_addr, u32 utmi_phy_port)
|
|
{
|
|
u32 data, mask, ret = 1;
|
|
void __iomem *addr;
|
|
|
|
debug_enter();
|
|
debug("stage: UTMI %d - Power up transceiver(Power up Phy), and exit SuspendDM\n",
|
|
utmi_index);
|
|
/* Power UP UTMI PHY */
|
|
reg_set(utmi_cfg_addr, 0x1 << UTMI_PHY_CFG_PU_OFFSET,
|
|
UTMI_PHY_CFG_PU_MASK);
|
|
/* Disable Test UTMI select */
|
|
reg_set(utmi_base_addr + UTMI_CTRL_STATUS0_REG,
|
|
0x0 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET,
|
|
UTMI_CTRL_STATUS0_TEST_SEL_MASK);
|
|
|
|
debug("stage: Polling for PLL and impedance calibration done, and PLL ready done\n");
|
|
addr = utmi_base_addr + UTMI_CALIB_CTRL_REG;
|
|
data = UTMI_CALIB_CTRL_IMPCAL_DONE_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 100);
|
|
if (data != 0) {
|
|
error("Impedance calibration is not done\n");
|
|
debug("Read from reg = %p - value = 0x%x\n", addr, data);
|
|
ret = 0;
|
|
}
|
|
|
|
data = UTMI_CALIB_CTRL_PLLCAL_DONE_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 100);
|
|
if (data != 0) {
|
|
error("PLL calibration is not done\n");
|
|
debug("Read from reg = %p - value = 0x%x\n", addr, data);
|
|
ret = 0;
|
|
}
|
|
|
|
addr = utmi_base_addr + UTMI_PLL_CTRL_REG;
|
|
data = UTMI_PLL_CTRL_PLL_RDY_MASK;
|
|
mask = data;
|
|
data = polling_with_timeout(addr, data, mask, 100);
|
|
if (data != 0) {
|
|
error("PLL is not ready\n");
|
|
debug("Read from reg = %p - value = 0x%x\n", addr, data);
|
|
ret = 0;
|
|
}
|
|
|
|
if (ret)
|
|
debug("Passed\n");
|
|
else
|
|
debug("\n");
|
|
|
|
debug_exit();
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* comphy_utmi_phy_init initialize the UTMI PHY
|
|
* the init split in 3 parts:
|
|
* 1. Power down transceiver and PLL
|
|
* 2. UTMI PHY configure
|
|
* 3. Powe up transceiver and PLL
|
|
* Note: - Power down/up should be once for both UTMI PHYs
|
|
* - comphy_dedicated_phys_init call this function if at least there is
|
|
* one UTMI PHY exists in FDT blob. access to cp110_utmi_data[0] is
|
|
* legal
|
|
*/
|
|
static void comphy_utmi_phy_init(u32 utmi_phy_count,
|
|
struct utmi_phy_data *cp110_utmi_data)
|
|
{
|
|
u32 i;
|
|
|
|
debug_enter();
|
|
/* UTMI Power down */
|
|
for (i = 0; i < utmi_phy_count; i++) {
|
|
comphy_utmi_power_down(i, cp110_utmi_data[i].utmi_base_addr,
|
|
cp110_utmi_data[i].usb_cfg_addr,
|
|
cp110_utmi_data[i].utmi_cfg_addr,
|
|
cp110_utmi_data[i].utmi_phy_port);
|
|
}
|
|
/* PLL Power down */
|
|
debug("stage: UTMI PHY power down PLL\n");
|
|
for (i = 0; i < utmi_phy_count; i++) {
|
|
reg_set(cp110_utmi_data[i].usb_cfg_addr,
|
|
0x0 << UTMI_USB_CFG_PLL_OFFSET, UTMI_USB_CFG_PLL_MASK);
|
|
}
|
|
/* UTMI configure */
|
|
for (i = 0; i < utmi_phy_count; i++) {
|
|
comphy_utmi_phy_config(i, cp110_utmi_data[i].utmi_base_addr,
|
|
cp110_utmi_data[i].usb_cfg_addr,
|
|
cp110_utmi_data[i].utmi_cfg_addr,
|
|
cp110_utmi_data[i].utmi_phy_port);
|
|
}
|
|
/* UTMI Power up */
|
|
for (i = 0; i < utmi_phy_count; i++) {
|
|
if (!comphy_utmi_power_up(i, cp110_utmi_data[i].utmi_base_addr,
|
|
cp110_utmi_data[i].usb_cfg_addr,
|
|
cp110_utmi_data[i].utmi_cfg_addr,
|
|
cp110_utmi_data[i].utmi_phy_port)) {
|
|
error("Failed to initialize UTMI PHY %d\n", i);
|
|
continue;
|
|
}
|
|
printf("UTMI PHY %d initialized to ", i);
|
|
if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0)
|
|
printf("USB Device\n");
|
|
else
|
|
printf("USB Host%d\n",
|
|
cp110_utmi_data[i].utmi_phy_port);
|
|
}
|
|
/* PLL Power up */
|
|
debug("stage: UTMI PHY power up PLL\n");
|
|
for (i = 0; i < utmi_phy_count; i++) {
|
|
reg_set(cp110_utmi_data[i].usb_cfg_addr,
|
|
0x1 << UTMI_USB_CFG_PLL_OFFSET, UTMI_USB_CFG_PLL_MASK);
|
|
}
|
|
|
|
debug_exit();
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* comphy_dedicated_phys_init initialize the dedicated PHYs
|
|
* - not muxed SerDes lanes e.g. UTMI PHY
|
|
*/
|
|
void comphy_dedicated_phys_init(void)
|
|
{
|
|
struct utmi_phy_data cp110_utmi_data[MAX_UTMI_PHY_COUNT];
|
|
int node;
|
|
int i;
|
|
|
|
debug_enter();
|
|
debug("Initialize USB UTMI PHYs\n");
|
|
|
|
/* Find the UTMI phy node in device tree and go over them */
|
|
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
|
|
"marvell,mvebu-utmi-2.6.0");
|
|
|
|
i = 0;
|
|
while (node > 0) {
|
|
/* get base address of UTMI phy */
|
|
cp110_utmi_data[i].utmi_base_addr =
|
|
(void __iomem *)fdtdec_get_addr_size_auto_noparent(
|
|
gd->fdt_blob, node, "reg", 0, NULL, true);
|
|
if (cp110_utmi_data[i].utmi_base_addr == NULL) {
|
|
error("UTMI PHY base address is invalid\n");
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
/* get usb config address */
|
|
cp110_utmi_data[i].usb_cfg_addr =
|
|
(void __iomem *)fdtdec_get_addr_size_auto_noparent(
|
|
gd->fdt_blob, node, "reg", 1, NULL, true);
|
|
if (cp110_utmi_data[i].usb_cfg_addr == NULL) {
|
|
error("UTMI PHY base address is invalid\n");
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
/* get UTMI config address */
|
|
cp110_utmi_data[i].utmi_cfg_addr =
|
|
(void __iomem *)fdtdec_get_addr_size_auto_noparent(
|
|
gd->fdt_blob, node, "reg", 2, NULL, true);
|
|
if (cp110_utmi_data[i].utmi_cfg_addr == NULL) {
|
|
error("UTMI PHY base address is invalid\n");
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* get the port number (to check if the utmi connected to
|
|
* host/device)
|
|
*/
|
|
cp110_utmi_data[i].utmi_phy_port = fdtdec_get_int(
|
|
gd->fdt_blob, node, "utmi-port", UTMI_PHY_INVALID);
|
|
if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_INVALID) {
|
|
error("UTMI PHY port type is invalid\n");
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
node = fdt_node_offset_by_compatible(
|
|
gd->fdt_blob, node, "marvell,mvebu-utmi-2.6.0");
|
|
i++;
|
|
}
|
|
|
|
if (i > 0)
|
|
comphy_utmi_phy_init(i, cp110_utmi_data);
|
|
|
|
debug_exit();
|
|
}
|
|
|
|
static void comphy_mux_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
|
|
struct comphy_map *serdes_map)
|
|
{
|
|
void __iomem *comphy_base_addr;
|
|
struct comphy_map comphy_map_pipe_data[MAX_LANE_OPTIONS];
|
|
struct comphy_map comphy_map_phy_data[MAX_LANE_OPTIONS];
|
|
u32 lane, comphy_max_count;
|
|
|
|
comphy_max_count = ptr_chip_cfg->comphy_lanes_count;
|
|
comphy_base_addr = ptr_chip_cfg->comphy_base_addr;
|
|
|
|
/*
|
|
* Copy the SerDes map configuration for PIPE map and PHY map
|
|
* the comphy_mux_init modify the type of the lane if the type
|
|
* is not valid because we have 2 selectores run the
|
|
* comphy_mux_init twice and after that update the original
|
|
* serdes_map
|
|
*/
|
|
for (lane = 0; lane < comphy_max_count; lane++) {
|
|
comphy_map_pipe_data[lane].type = serdes_map[lane].type;
|
|
comphy_map_pipe_data[lane].speed = serdes_map[lane].speed;
|
|
comphy_map_phy_data[lane].type = serdes_map[lane].type;
|
|
comphy_map_phy_data[lane].speed = serdes_map[lane].speed;
|
|
}
|
|
ptr_chip_cfg->mux_data = cp110_comphy_phy_mux_data;
|
|
comphy_mux_init(ptr_chip_cfg, comphy_map_phy_data,
|
|
comphy_base_addr + COMMON_SELECTOR_PHY_OFFSET);
|
|
|
|
ptr_chip_cfg->mux_data = cp110_comphy_pipe_mux_data;
|
|
comphy_mux_init(ptr_chip_cfg, comphy_map_pipe_data,
|
|
comphy_base_addr + COMMON_SELECTOR_PIPE_OFFSET);
|
|
/* Fix the type after check the PHY and PIPE configuration */
|
|
for (lane = 0; lane < comphy_max_count; lane++) {
|
|
if ((comphy_map_pipe_data[lane].type == PHY_TYPE_UNCONNECTED) &&
|
|
(comphy_map_phy_data[lane].type == PHY_TYPE_UNCONNECTED))
|
|
serdes_map[lane].type = PHY_TYPE_UNCONNECTED;
|
|
}
|
|
}
|
|
|
|
int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
|
|
struct comphy_map *serdes_map)
|
|
{
|
|
struct comphy_map *ptr_comphy_map;
|
|
void __iomem *comphy_base_addr, *hpipe_base_addr;
|
|
u32 comphy_max_count, lane, ret = 0;
|
|
u32 pcie_width = 0;
|
|
|
|
debug_enter();
|
|
|
|
comphy_max_count = ptr_chip_cfg->comphy_lanes_count;
|
|
comphy_base_addr = ptr_chip_cfg->comphy_base_addr;
|
|
hpipe_base_addr = ptr_chip_cfg->hpipe3_base_addr;
|
|
|
|
/* Config Comphy mux configuration */
|
|
comphy_mux_cp110_init(ptr_chip_cfg, serdes_map);
|
|
|
|
/* Check if the first 4 lanes configured as By-4 */
|
|
for (lane = 0, ptr_comphy_map = serdes_map; lane < 4;
|
|
lane++, ptr_comphy_map++) {
|
|
if (ptr_comphy_map->type != PHY_TYPE_PEX0)
|
|
break;
|
|
pcie_width++;
|
|
}
|
|
|
|
for (lane = 0, ptr_comphy_map = serdes_map; lane < comphy_max_count;
|
|
lane++, ptr_comphy_map++) {
|
|
debug("Initialize serdes number %d\n", lane);
|
|
debug("Serdes type = 0x%x\n", ptr_comphy_map->type);
|
|
if (lane == 4) {
|
|
/*
|
|
* PCIe lanes above the first 4 lanes, can be only
|
|
* by1
|
|
*/
|
|
pcie_width = 1;
|
|
}
|
|
switch (ptr_comphy_map->type) {
|
|
case PHY_TYPE_UNCONNECTED:
|
|
continue;
|
|
break;
|
|
case PHY_TYPE_PEX0:
|
|
case PHY_TYPE_PEX1:
|
|
case PHY_TYPE_PEX2:
|
|
case PHY_TYPE_PEX3:
|
|
ret = comphy_pcie_power_up(
|
|
lane, pcie_width, ptr_comphy_map->clk_src,
|
|
hpipe_base_addr, comphy_base_addr);
|
|
break;
|
|
case PHY_TYPE_SATA0:
|
|
case PHY_TYPE_SATA1:
|
|
case PHY_TYPE_SATA2:
|
|
case PHY_TYPE_SATA3:
|
|
ret = comphy_sata_power_up(
|
|
lane, hpipe_base_addr, comphy_base_addr,
|
|
ptr_chip_cfg->comphy_index);
|
|
break;
|
|
case PHY_TYPE_USB3_HOST0:
|
|
case PHY_TYPE_USB3_HOST1:
|
|
case PHY_TYPE_USB3_DEVICE:
|
|
ret = comphy_usb3_power_up(lane, hpipe_base_addr,
|
|
comphy_base_addr);
|
|
break;
|
|
case PHY_TYPE_SGMII0:
|
|
case PHY_TYPE_SGMII1:
|
|
case PHY_TYPE_SGMII2:
|
|
case PHY_TYPE_SGMII3:
|
|
if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
|
|
debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n",
|
|
lane);
|
|
ptr_comphy_map->speed = PHY_SPEED_1_25G;
|
|
}
|
|
ret = comphy_sgmii_power_up(
|
|
lane, ptr_comphy_map->speed, hpipe_base_addr,
|
|
comphy_base_addr);
|
|
break;
|
|
case PHY_TYPE_KR:
|
|
ret = comphy_kr_power_up(lane, hpipe_base_addr,
|
|
comphy_base_addr);
|
|
break;
|
|
case PHY_TYPE_RXAUI0:
|
|
case PHY_TYPE_RXAUI1:
|
|
ret = comphy_rxauii_power_up(lane, hpipe_base_addr,
|
|
comphy_base_addr);
|
|
break;
|
|
default:
|
|
debug("Unknown SerDes type, skip initialize SerDes %d\n",
|
|
lane);
|
|
break;
|
|
}
|
|
if (ret == 0) {
|
|
/*
|
|
* If interface wans't initialiuzed, set the lane to
|
|
* PHY_TYPE_UNCONNECTED state.
|
|
*/
|
|
ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
|
|
error("PLL is not locked - Failed to initialize lane %d\n",
|
|
lane);
|
|
}
|
|
}
|
|
|
|
debug_exit();
|
|
return 0;
|
|
}
|