mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Jagan Teki](/assets/img/avatar_default.png)
Update all A23/A33/r16 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. A23: commit bc3bd041fe766219a44688b182c260064007f0cc Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:02 2018 +0200 ARM: dts: sun8i: a23/a33: declare NAND pins A33: commit 88fe315d2c0a397ef42d7639addab0e021ae911d Author: Maxime Ripard <maxime.ripard@bootlin.com> Date: Wed Apr 4 11:57:15 2018 +0200 ARM: dts: sun8i: a33: Add the DSI-related nodes r16: commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96 Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:03 2018 +0200 ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support Note: - Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since sun8i-a23-a33.dtsi is added with Linux sync. - Don't sync non U-Boot supported dts files sun8i-a23-ippo-q8h-v1.2.dts sun8i-a23-ippo-q8h-v5.dts sun8i-a33-et-q8-v1.6.dts sun8i-a33-ippo-q8h-v1.2.dts sun8i-r16-nintendo-nes-classic.dts sun8i-r16-nintendo-super-nes-classic.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
356 lines
7.5 KiB
Plaintext
356 lines
7.5 KiB
Plaintext
/*
|
|
* Copyright 2016 Quentin Schulz
|
|
*
|
|
* Quentin Schulz <quentin.schulz@free-electrons.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sun8i-a33.dtsi"
|
|
#include "sunxi-common-regulators.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Allwinner R16 EVB (Parrot)";
|
|
compatible = "allwinner,parrot", "allwinner,sun8i-a33";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pins_parrot>;
|
|
|
|
led1 {
|
|
label = "parrot:led1:usr";
|
|
gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
|
|
};
|
|
|
|
led2 {
|
|
label = "parrot:led2:usr";
|
|
gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
|
|
};
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
|
|
};
|
|
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins_a>;
|
|
status = "okay";
|
|
|
|
/*
|
|
* FIXME: An as-yet-unknown accelerometer is connected to this
|
|
* i2c bus.
|
|
*/
|
|
};
|
|
|
|
&lradc {
|
|
vref-supply = <®_aldo3>;
|
|
status = "okay";
|
|
|
|
button@0 {
|
|
label = "V+";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
channel = <0>;
|
|
voltage = <190000>;
|
|
};
|
|
|
|
button@1 {
|
|
label = "V-";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
channel = <0>;
|
|
voltage = <390000>;
|
|
};
|
|
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
|
|
vmmc-supply = <®_aldo1>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_8bit_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2_8bit_pins {
|
|
drive-strength = <40>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
|
|
pins = "PD14";
|
|
function = "gpio_in";
|
|
bias-pull-up;
|
|
};
|
|
|
|
led_pins_parrot: led_pins@0 {
|
|
pins = "PE16", "PE17";
|
|
function = "gpio_out";
|
|
};
|
|
|
|
usb0_id_det: usb0_id_detect_pin@0 {
|
|
pins = "PD10";
|
|
function = "gpio_in";
|
|
bias-pull-up;
|
|
};
|
|
|
|
usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
|
|
pins = "PD12";
|
|
function = "gpio_out";
|
|
};
|
|
};
|
|
|
|
&r_pio {
|
|
wifi_reset_pin_parrot: wifi_reset_pin@0 {
|
|
pins = "PL6";
|
|
function = "gpio_out";
|
|
};
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp22x: pmic@3a3 {
|
|
compatible = "x-powers,axp223";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&nmi_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
drivevbus-supply = <®_vcc5v0>;
|
|
x-powers,drive-vbus-en;
|
|
};
|
|
};
|
|
|
|
#include "axp223.dtsi"
|
|
|
|
®_aldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc-io";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2350000>;
|
|
regulator-max-microvolt = <2650000>;
|
|
regulator-name = "vdd-dll";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dc5ldo {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc-3v0";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dcdc3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dldo1 {
|
|
/*
|
|
* TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
|
|
* Remove next line once it is possible to sync two regulators.
|
|
*/
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi0";
|
|
};
|
|
|
|
®_dldo2 {
|
|
/*
|
|
* TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
|
|
* Remove next line once it is possible to sync two regulators.
|
|
*/
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi1";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc-3v0-csi";
|
|
};
|
|
|
|
®_drivevbus {
|
|
regulator-name = "usb0-vbus";
|
|
status = "okay";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
®_eldo2 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc-dsp";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "eldo3";
|
|
};
|
|
|
|
®_usb1_vbus {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb1_vbus_pin_parrot>;
|
|
gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
|
|
status = "okay";
|
|
};
|
|
|
|
&sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_b>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb0_id_det>;
|
|
usb0_vbus-supply = <®_drivevbus>;
|
|
usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
|
|
usb0_vbus_power-supply = <&usb_power_supply>;
|
|
usb1_vbus-supply = <®_usb1_vbus>;
|
|
};
|