mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-10-01 09:00:45 +09:00
5ab884b254
This patch makes two additions to GPIO support: First, it adds function gpio_read_in_bit() to read the a bit from the GPIO Input Register (GPIOx_IR) in the same way that function gpio_read_out_bit() reads a bit from the GPIO Output Register (GPIOx_OR). Second, it modifies function gpio_set_chip_configuration() to provide an additional option for configuring the GPIO from the "CFG_4xx_GPIO_TABLE". According to the 440EPx User's Manual, when an alternate output is used, the three-state control is configured in one of two ways, depending on the particular output. The first option is to select the corresponding alternate three-state control in the GPIOx_TRSH/L registers. The second option is to select the GPIO Three-State Control Register (GPIOx_TCR) in the GPIOx_TRSH/L registers, and set the corresponding bit in the GPIOx_TCR register to enable the output. For example, the Manual specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use the alternate three-state control (first option), and specifies configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output enabled in the GPIOx_TCR register (second option). Currently, gpio_set_chip_configuration() configures all alternate signal outputs to use the first option. This patch allow the second option to be selected by setting the "out_val" element in the table entry to "GPIO_OUT_1". The first option is used when the "out_val" element is set to "GPIO_OUT_0". Because "out_val" is not currently used when an alternate signal is selected, and because all current GPIO tables set "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should not change any existing configurations. Signed-off-by: Larry Johnson <lrj@acm.org> |
||
---|---|---|
.. | ||
4xx_pci.h | ||
4xx_pcie.h | ||
5xx_immap.h | ||
8xx_immap.h | ||
atomic.h | ||
bitops.h | ||
byteorder.h | ||
cache.h | ||
cpm_85xx.h | ||
cpm_8260.h | ||
e300.h | ||
errno.h | ||
fsl_i2c.h | ||
global_data.h | ||
gpio.h | ||
immap_83xx.h | ||
immap_85xx.h | ||
immap_86xx.h | ||
immap_512x.h | ||
immap_8220.h | ||
immap_8260.h | ||
immap_fsl_pci.h | ||
immap_qe.h | ||
io.h | ||
iopin_8xx.h | ||
iopin_85xx.h | ||
iopin_8260.h | ||
m8260_pci.h | ||
mc146818rtc.h | ||
mmu.h | ||
mpc8349_pci.h | ||
pci_io.h | ||
pnp.h | ||
posix_types.h | ||
processor.h | ||
ptrace.h | ||
residual.h | ||
sigcontext.h | ||
signal.h | ||
status_led.h | ||
string.h | ||
types.h | ||
u-boot.h |