mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
434 lines
10 KiB
C
434 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Freescale i.MX23/i.MX28 LCDIF driver
|
|
*
|
|
* Copyright (C) 2011-2013 Marek Vasut <marex@denx.de>
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <linux/errno.h>
|
|
#include <malloc.h>
|
|
#include <video.h>
|
|
#include <video_fb.h>
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/dma.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "videomodes.h"
|
|
|
|
#define PS2KHZ(ps) (1000000000UL / (ps))
|
|
#define HZ2PS(hz) (1000000000UL / ((hz) / 1000))
|
|
|
|
#define BITS_PP 18
|
|
#define BYTES_PP 4
|
|
|
|
struct mxs_dma_desc desc;
|
|
|
|
/**
|
|
* mxsfb_system_setup() - Fine-tune LCDIF configuration
|
|
*
|
|
* This function is used to adjust the LCDIF configuration. This is usually
|
|
* needed when driving the controller in System-Mode to operate an 8080 or
|
|
* 6800 connected SmartLCD.
|
|
*/
|
|
__weak void mxsfb_system_setup(void)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* ARIES M28EVK:
|
|
* setenv videomode
|
|
* video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
|
|
* le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
|
|
*
|
|
* Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel:
|
|
* setenv videomode
|
|
* video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851,
|
|
* le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
|
|
*/
|
|
|
|
static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp)
|
|
{
|
|
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
|
|
uint32_t word_len = 0, bus_width = 0;
|
|
uint8_t valid_data = 0;
|
|
|
|
/* Kick in the LCDIF clock */
|
|
mxs_set_lcdclk(MXS_LCDIF_BASE, PS2KHZ(mode->pixclock));
|
|
|
|
/* Restart the LCDIF block */
|
|
mxs_reset_block(®s->hw_lcdif_ctrl_reg);
|
|
|
|
switch (bpp) {
|
|
case 24:
|
|
word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
|
|
bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT;
|
|
valid_data = 0x7;
|
|
break;
|
|
case 18:
|
|
word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
|
|
bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT;
|
|
valid_data = 0x7;
|
|
break;
|
|
case 16:
|
|
word_len = LCDIF_CTRL_WORD_LENGTH_16BIT;
|
|
bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT;
|
|
valid_data = 0xf;
|
|
break;
|
|
case 8:
|
|
word_len = LCDIF_CTRL_WORD_LENGTH_8BIT;
|
|
bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT;
|
|
valid_data = 0xf;
|
|
break;
|
|
}
|
|
|
|
writel(bus_width | word_len | LCDIF_CTRL_DOTCLK_MODE |
|
|
LCDIF_CTRL_BYPASS_COUNT | LCDIF_CTRL_LCDIF_MASTER,
|
|
®s->hw_lcdif_ctrl);
|
|
|
|
writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET,
|
|
®s->hw_lcdif_ctrl1);
|
|
|
|
mxsfb_system_setup();
|
|
|
|
writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres,
|
|
®s->hw_lcdif_transfer_count);
|
|
|
|
writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL |
|
|
LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT |
|
|
LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
|
|
mode->vsync_len, ®s->hw_lcdif_vdctrl0);
|
|
writel(mode->upper_margin + mode->lower_margin +
|
|
mode->vsync_len + mode->yres,
|
|
®s->hw_lcdif_vdctrl1);
|
|
writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) |
|
|
(mode->left_margin + mode->right_margin +
|
|
mode->hsync_len + mode->xres),
|
|
®s->hw_lcdif_vdctrl2);
|
|
writel(((mode->left_margin + mode->hsync_len) <<
|
|
LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) |
|
|
(mode->upper_margin + mode->vsync_len),
|
|
®s->hw_lcdif_vdctrl3);
|
|
writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres,
|
|
®s->hw_lcdif_vdctrl4);
|
|
|
|
writel(fb_addr, ®s->hw_lcdif_cur_buf);
|
|
writel(fb_addr, ®s->hw_lcdif_next_buf);
|
|
|
|
/* Flush FIFO first */
|
|
writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set);
|
|
|
|
#ifndef CONFIG_VIDEO_MXS_MODE_SYSTEM
|
|
/* Sync signals ON */
|
|
setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON);
|
|
#endif
|
|
|
|
/* FIFO cleared */
|
|
writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr);
|
|
|
|
/* RUN! */
|
|
writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set);
|
|
}
|
|
|
|
static int mxs_probe_common(struct ctfb_res_modes *mode, int bpp, u32 fb)
|
|
{
|
|
/* Start framebuffer */
|
|
mxs_lcd_init(fb, mode, bpp);
|
|
|
|
#ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM
|
|
/*
|
|
* If the LCD runs in system mode, the LCD refresh has to be triggered
|
|
* manually by setting the RUN bit in HW_LCDIF_CTRL register. To avoid
|
|
* having to set this bit manually after every single change in the
|
|
* framebuffer memory, we set up specially crafted circular DMA, which
|
|
* sets the RUN bit, then waits until it gets cleared and repeats this
|
|
* infinitelly. This way, we get smooth continuous updates of the LCD.
|
|
*/
|
|
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
|
|
|
|
memset(&desc, 0, sizeof(struct mxs_dma_desc));
|
|
desc.address = (dma_addr_t)&desc;
|
|
desc.cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
|
|
MXS_DMA_DESC_WAIT4END |
|
|
(1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
|
|
desc.cmd.pio_words[0] = readl(®s->hw_lcdif_ctrl) | LCDIF_CTRL_RUN;
|
|
desc.cmd.next = (uint32_t)&desc.cmd;
|
|
|
|
/* Execute the DMA chain. */
|
|
mxs_dma_circ_start(MXS_DMA_CHANNEL_AHB_APBH_LCDIF, &desc);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_remove_common(u32 fb)
|
|
{
|
|
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
|
|
int timeout = 1000000;
|
|
|
|
if (!fb)
|
|
return -EINVAL;
|
|
|
|
writel(fb, ®s->hw_lcdif_cur_buf_reg);
|
|
writel(fb, ®s->hw_lcdif_next_buf_reg);
|
|
writel(LCDIF_CTRL1_VSYNC_EDGE_IRQ, ®s->hw_lcdif_ctrl1_clr);
|
|
while (--timeout) {
|
|
if (readl(®s->hw_lcdif_ctrl1_reg) &
|
|
LCDIF_CTRL1_VSYNC_EDGE_IRQ)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
mxs_reset_block((struct mxs_register_32 *)®s->hw_lcdif_ctrl_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_VIDEO
|
|
|
|
static GraphicDevice panel;
|
|
|
|
void lcdif_power_down(void)
|
|
{
|
|
mxs_remove_common(panel.frameAdrs);
|
|
}
|
|
|
|
void *video_hw_init(void)
|
|
{
|
|
int bpp = -1;
|
|
int ret = 0;
|
|
char *penv;
|
|
void *fb = NULL;
|
|
struct ctfb_res_modes mode;
|
|
|
|
puts("Video: ");
|
|
|
|
/* Suck display configuration from "videomode" variable */
|
|
penv = env_get("videomode");
|
|
if (!penv) {
|
|
puts("MXSFB: 'videomode' variable not set!\n");
|
|
return NULL;
|
|
}
|
|
|
|
bpp = video_get_params(&mode, penv);
|
|
|
|
/* fill in Graphic device struct */
|
|
sprintf(panel.modeIdent, "%dx%dx%d", mode.xres, mode.yres, bpp);
|
|
|
|
panel.winSizeX = mode.xres;
|
|
panel.winSizeY = mode.yres;
|
|
panel.plnSizeX = mode.xres;
|
|
panel.plnSizeY = mode.yres;
|
|
|
|
switch (bpp) {
|
|
case 24:
|
|
case 18:
|
|
panel.gdfBytesPP = 4;
|
|
panel.gdfIndex = GDF_32BIT_X888RGB;
|
|
break;
|
|
case 16:
|
|
panel.gdfBytesPP = 2;
|
|
panel.gdfIndex = GDF_16BIT_565RGB;
|
|
break;
|
|
case 8:
|
|
panel.gdfBytesPP = 1;
|
|
panel.gdfIndex = GDF__8BIT_INDEX;
|
|
break;
|
|
default:
|
|
printf("MXSFB: Invalid BPP specified! (bpp = %i)\n", bpp);
|
|
return NULL;
|
|
}
|
|
|
|
panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP;
|
|
|
|
/* Allocate framebuffer */
|
|
fb = memalign(ARCH_DMA_MINALIGN,
|
|
roundup(panel.memSize, ARCH_DMA_MINALIGN));
|
|
if (!fb) {
|
|
printf("MXSFB: Error allocating framebuffer!\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* Wipe framebuffer */
|
|
memset(fb, 0, panel.memSize);
|
|
|
|
panel.frameAdrs = (u32)fb;
|
|
|
|
printf("%s\n", panel.modeIdent);
|
|
|
|
ret = mxs_probe_common(&mode, bpp, (u32)fb);
|
|
if (ret)
|
|
goto dealloc_fb;
|
|
|
|
return (void *)&panel;
|
|
|
|
dealloc_fb:
|
|
free(fb);
|
|
|
|
return NULL;
|
|
}
|
|
#else /* ifndef CONFIG_DM_VIDEO */
|
|
|
|
static int mxs_of_get_timings(struct udevice *dev,
|
|
struct display_timing *timings,
|
|
u32 *bpp)
|
|
{
|
|
int ret = 0;
|
|
u32 display_phandle;
|
|
ofnode display_node;
|
|
|
|
ret = ofnode_read_u32(dev_ofnode(dev), "display", &display_phandle);
|
|
if (ret) {
|
|
dev_err(dev, "required display property isn't provided\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
display_node = ofnode_get_by_phandle(display_phandle);
|
|
if (!ofnode_valid(display_node)) {
|
|
dev_err(dev, "failed to find display subnode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ofnode_read_u32(display_node, "bits-per-pixel", bpp);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"required bits-per-pixel property isn't provided\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ofnode_decode_display_timing(display_node, 0, timings);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get any display timings\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxs_video_probe(struct udevice *dev)
|
|
{
|
|
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
|
|
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
struct ctfb_res_modes mode;
|
|
struct display_timing timings;
|
|
u32 bpp = 0;
|
|
u32 fb_start, fb_end;
|
|
int ret;
|
|
|
|
debug("%s() plat: base 0x%lx, size 0x%x\n",
|
|
__func__, plat->base, plat->size);
|
|
|
|
ret = mxs_of_get_timings(dev, &timings, &bpp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mode.xres = timings.hactive.typ;
|
|
mode.yres = timings.vactive.typ;
|
|
mode.left_margin = timings.hback_porch.typ;
|
|
mode.right_margin = timings.hfront_porch.typ;
|
|
mode.upper_margin = timings.vback_porch.typ;
|
|
mode.lower_margin = timings.vfront_porch.typ;
|
|
mode.hsync_len = timings.hsync_len.typ;
|
|
mode.vsync_len = timings.vsync_len.typ;
|
|
mode.pixclock = HZ2PS(timings.pixelclock.typ);
|
|
|
|
ret = mxs_probe_common(&mode, bpp, plat->base);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (bpp) {
|
|
case 32:
|
|
case 24:
|
|
case 18:
|
|
uc_priv->bpix = VIDEO_BPP32;
|
|
break;
|
|
case 16:
|
|
uc_priv->bpix = VIDEO_BPP16;
|
|
break;
|
|
case 8:
|
|
uc_priv->bpix = VIDEO_BPP8;
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid bpp specified (bpp = %i)\n", bpp);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uc_priv->xsize = mode.xres;
|
|
uc_priv->ysize = mode.yres;
|
|
|
|
/* Enable dcache for the frame buffer */
|
|
fb_start = plat->base & ~(MMU_SECTION_SIZE - 1);
|
|
fb_end = plat->base + plat->size;
|
|
fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
|
|
mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
|
|
DCACHE_WRITEBACK);
|
|
video_set_flush_dcache(dev, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxs_video_bind(struct udevice *dev)
|
|
{
|
|
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
|
|
struct display_timing timings;
|
|
u32 bpp = 0;
|
|
u32 bytes_pp = 0;
|
|
int ret;
|
|
|
|
ret = mxs_of_get_timings(dev, &timings, &bpp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (bpp) {
|
|
case 32:
|
|
case 24:
|
|
case 18:
|
|
bytes_pp = 4;
|
|
break;
|
|
case 16:
|
|
bytes_pp = 2;
|
|
break;
|
|
case 8:
|
|
bytes_pp = 1;
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid bpp specified (bpp = %i)\n", bpp);
|
|
return -EINVAL;
|
|
}
|
|
|
|
plat->size = timings.hactive.typ * timings.vactive.typ * bytes_pp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_video_remove(struct udevice *dev)
|
|
{
|
|
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
|
|
|
|
mxs_remove_common(plat->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mxs_video_ids[] = {
|
|
{ .compatible = "fsl,imx23-lcdif" },
|
|
{ .compatible = "fsl,imx28-lcdif" },
|
|
{ .compatible = "fsl,imx7ulp-lcdif" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mxs_video) = {
|
|
.name = "mxs_video",
|
|
.id = UCLASS_VIDEO,
|
|
.of_match = mxs_video_ids,
|
|
.bind = mxs_video_bind,
|
|
.probe = mxs_video_probe,
|
|
.remove = mxs_video_remove,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
#endif /* ifndef CONFIG_DM_VIDEO */
|