u-boot-brain/drivers/usb/host
Stefan Agner b1d615f3f1 usb: tegra: fix PHY configuration
On Tegra30 and later, the PTS (parallel transceiver select) and STS
(serial transceiver select) are part of the HOSTPC1_DEVLC_0 register
rather than PORTSC1_0 register. Since the reset configuration
usually matches the intended configuration, this error did not show
up on Tegra30 devices.

Also use the slightly different bit fields of first USB, (USBD) on
Tegra20 and move those definitions to the Tegra20 specific header
file.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-04-17 08:41:06 -07:00
..
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-exynos.c usb: exynos5: arndale: Add network support 2014-01-13 12:23:28 +01:00
ehci-faraday.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-fsl.c fsl/usb: Limit phy_type comparison to first four characters 2014-02-24 15:23:57 -08:00
ehci-hcd.c usb: ehci: fully align interrupt QHs/QTDs 2014-03-10 18:53:36 +01:00
ehci-marvell.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mpc512x.c powerpc/usb:Differentiate USB controller base address 2013-10-24 09:35:09 -07:00
ehci-mx5.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mx6.c usb: ehci-mx6: add support for otg port 2013-10-20 23:46:33 +02:00
ehci-mxc.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mxs.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c usb: ehci-pci: Clarify and cleanup the EHCI controller detection 2013-12-18 19:53:19 +01:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-spear.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-tegra.c usb: tegra: fix PHY configuration 2014-04-17 08:41:06 -07:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci.h usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
isp116x-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Makefile ARM: USB: Remove the IXP EHCI driver 2014-02-06 02:51:52 +01:00
ohci-at91.c arm: atmel: get rid of too many ifdeffery 2013-11-04 20:32:37 +01:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
ohci-s3c24xx.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci.h usb: new board-specific USB init interface 2013-10-20 23:42:40 +02:00
r8a66597-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
r8a66597.h usb: r8a66597: Fix argument mistake of inl 2011-08-08 21:40:40 +02:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-exynos5.c exynos: usb: Switch USB VBUS GPIOs to be device tree configured 2013-10-20 23:42:38 +02:00
xhci-mem.c USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00
xhci-omap.c usb: rename board_usb_init_type to usb_init_type 2013-10-22 17:33:09 -04:00
xhci-ring.c USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00
xhci.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
xhci.h USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00