mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Masahiro Yamada](/assets/img/avatar_default.png)
Add 'const' (also 'static' in some places) to struct node_info arrays to save memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
222 lines
4.9 KiB
C
222 lines
4.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
|
*
|
|
* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/iomux-mx35.h>
|
|
#include <i2c.h>
|
|
#include <linux/types.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <netdev.h>
|
|
#include <fdt_support.h>
|
|
#include <mtd_node.h>
|
|
#include <jffs2/load_kernel.h>
|
|
|
|
#ifndef CONFIG_BOARD_EARLY_INIT_F
|
|
#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
|
|
#endif
|
|
|
|
#define CCM_CCMR_CONFIG 0x003F4208
|
|
|
|
#define ESDCTL_DDR2_CONFIG 0x007FFC3F
|
|
|
|
static inline void dram_wait(unsigned int count)
|
|
{
|
|
volatile unsigned int wait = count;
|
|
|
|
while (wait--)
|
|
;
|
|
}
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
|
|
PHYS_SDRAM_1_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void board_setup_sdram(void)
|
|
{
|
|
struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
|
|
|
|
/* Initialize with default values both CSD0/1 */
|
|
writel(0x2000, &esdc->esdctl0);
|
|
writel(0x2000, &esdc->esdctl1);
|
|
|
|
|
|
mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
|
|
13, 10, 2, 0x8080);
|
|
}
|
|
|
|
static void setup_iomux_uart3(void)
|
|
{
|
|
static const iomux_v3_cfg_t uart3_pads[] = {
|
|
MX35_PAD_RTS2__UART3_RXD_MUX,
|
|
MX35_PAD_CTS2__UART3_TXD_MUX,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
|
|
}
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
|
|
|
|
static void setup_iomux_i2c(void)
|
|
{
|
|
static const iomux_v3_cfg_t i2c_pads[] = {
|
|
NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
|
|
|
|
NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
|
|
}
|
|
|
|
|
|
static void setup_iomux_spi(void)
|
|
{
|
|
static const iomux_v3_cfg_t spi_pads[] = {
|
|
MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
|
|
MX35_PAD_CSPI1_MISO__CSPI1_MISO,
|
|
MX35_PAD_CSPI1_SS0__CSPI1_SS0,
|
|
MX35_PAD_CSPI1_SS1__CSPI1_SS1,
|
|
MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
|
|
}
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
static const iomux_v3_cfg_t fec_pads[] = {
|
|
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
|
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
|
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
|
MX35_PAD_FEC_COL__FEC_COL,
|
|
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
|
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
|
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
|
MX35_PAD_FEC_MDC__FEC_MDC,
|
|
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
|
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
|
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
|
MX35_PAD_FEC_CRS__FEC_CRS,
|
|
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
|
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
|
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
|
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
|
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
|
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
|
/* GPIO used to power off ethernet */
|
|
MX35_PAD_STXFS4__GPIO2_31,
|
|
};
|
|
|
|
/* setup pins for FEC */
|
|
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
struct ccm_regs *ccm =
|
|
(struct ccm_regs *)IMX_CCM_BASE;
|
|
|
|
/* setup GPIO3_1 to set HighVCore signal */
|
|
imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
|
|
gpio_direction_output(65, 1);
|
|
|
|
/* initialize PLL and clock configuration */
|
|
writel(CCM_CCMR_CONFIG, &ccm->ccmr);
|
|
|
|
writel(CCM_MPLL_532_HZ, &ccm->mpctl);
|
|
writel(CCM_PPLL_300_HZ, &ccm->ppctl);
|
|
|
|
/* Set the core to run at 532 Mhz */
|
|
writel(0x00001000, &ccm->pdr0);
|
|
|
|
/* Set-up RAM */
|
|
board_setup_sdram();
|
|
|
|
/* enable clocks */
|
|
writel(readl(&ccm->cgr0) |
|
|
MXC_CCM_CGR0_EMI_MASK |
|
|
MXC_CCM_CGR0_EDIO_MASK |
|
|
MXC_CCM_CGR0_EPIT1_MASK,
|
|
&ccm->cgr0);
|
|
|
|
writel(readl(&ccm->cgr1) |
|
|
MXC_CCM_CGR1_FEC_MASK |
|
|
MXC_CCM_CGR1_GPIO1_MASK |
|
|
MXC_CCM_CGR1_GPIO2_MASK |
|
|
MXC_CCM_CGR1_GPIO3_MASK |
|
|
MXC_CCM_CGR1_I2C1_MASK |
|
|
MXC_CCM_CGR1_I2C2_MASK |
|
|
MXC_CCM_CGR1_I2C3_MASK,
|
|
&ccm->cgr1);
|
|
|
|
/* Set-up NAND */
|
|
__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
|
|
|
|
/* Set pinmux for the required peripherals */
|
|
setup_iomux_uart3();
|
|
setup_iomux_i2c();
|
|
setup_iomux_fec();
|
|
setup_iomux_spi();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
/* Enable power for ethernet */
|
|
gpio_direction_output(63, 0);
|
|
|
|
udelay(2000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
int rev = 0;
|
|
|
|
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
|
|
}
|
|
|
|
/*
|
|
* called prior to booting kernel or by 'fdt boardsetup' command
|
|
*
|
|
*/
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
static const struct node_info nodes[] = {
|
|
{ "physmap-flash.0", MTD_DEV_TYPE_NOR, }, /* NOR flash */
|
|
{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
|
|
};
|
|
|
|
if (env_get("fdt_noauto")) {
|
|
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
|
|
return 0;
|
|
}
|
|
|
|
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
|
|
|
|
return 0;
|
|
}
|