mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Nikita Kiryanov](/assets/img/avatar_default.png)
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
379 lines
10 KiB
C
379 lines
10 KiB
C
/*
|
|
*
|
|
* Configuration settings for the Armadeus Project motherboard APF27
|
|
*
|
|
* Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#define CONFIG_ENV_VERSION 10
|
|
#define CONFIG_IDENT_STRING " apf27 patch 3.10"
|
|
#define CONFIG_BOARD_NAME apf27
|
|
|
|
/*
|
|
* SoC configurations
|
|
*/
|
|
#define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */
|
|
#define CONFIG_MACH_TYPE 1698 /* APF27 */
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
|
|
/*
|
|
* Enable the call to miscellaneous platform dependent initialization.
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/*
|
|
* Board display option
|
|
*/
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
/*
|
|
* SPL
|
|
*/
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
|
|
#define CONFIG_SPL_MAX_SIZE 2048
|
|
#define CONFIG_SPL_TEXT_BASE 0xA0000000
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
|
|
/* NAND boot config */
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_DNS
|
|
#define CONFIG_BOOTP_DNS2
|
|
|
|
#define CONFIG_HOSTNAME CONFIG_BOARD_NAME
|
|
#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
|
|
|
|
/*
|
|
* U-Boot Commands
|
|
*/
|
|
#define CONFIG_CMD_ASKENV /* ask for env variable */
|
|
#define CONFIG_CMD_BSP /* Board Specific functions */
|
|
#define CONFIG_CMD_CACHE /* icache, dcache */
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP /* DHCP Support */
|
|
#define CONFIG_CMD_DNS
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT /* FAT support */
|
|
#define CONFIG_CMD_IMX_FUSE /* imx iim fuse */
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII /* MII support */
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_MTDPARTS /* MTD partition support */
|
|
#define CONFIG_CMD_NAND /* NAND support */
|
|
#define CONFIG_CMD_NAND_LOCK_UNLOCK
|
|
#define CONFIG_CMD_NAND_TRIMFFS
|
|
#define CONFIG_CMD_PING /* ping support */
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_UBIFS
|
|
|
|
/*
|
|
* Memory configurations
|
|
*/
|
|
#define CONFIG_NR_DRAM_POPULATED 1
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
|
|
#define ACFG_SDRAM_MBYTE_SYZE 64
|
|
|
|
#define PHYS_SDRAM_1 0xA0000000
|
|
#define PHYS_SDRAM_2 0xB0000000
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10))
|
|
#define CONFIG_SYS_MEMTEST_START 0xA0000000 /* memtest test area */
|
|
#define CONFIG_SYS_MEMTEST_END 0xA0300000 /* 3 MiB RAM test */
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \
|
|
+ PHYS_SDRAM_1_SIZE - 0x0100000)
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xA0000800
|
|
|
|
/*
|
|
* FLASH organization
|
|
*/
|
|
#define ACFG_MONITOR_OFFSET 0x00000000
|
|
#define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_ENV_OFFSET 0x00100000 /* NAND offset */
|
|
#define CONFIG_ENV_SIZE 0x00020000 /* 128kB */
|
|
#define CONFIG_ENV_RANGE 0X00080000 /* 512kB */
|
|
#define CONFIG_ENV_OFFSET_REDUND \
|
|
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) /* +512kB */
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* 512kB */
|
|
#define CONFIG_FIRMWARE_OFFSET 0x00200000
|
|
#define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */
|
|
#define CONFIG_KERNEL_OFFSET 0x00300000
|
|
#define CONFIG_ROOTFS_OFFSET 0x00800000
|
|
|
|
#define CONFIG_MTDMAP "mxc_nand.0"
|
|
#define MTDIDS_DEFAULT "nand0=" CONFIG_MTDMAP
|
|
#define MTDPARTS_DEFAULT "mtdparts=" CONFIG_MTDMAP \
|
|
":1M(u-boot)ro," \
|
|
"512K(env)," \
|
|
"512K(env2)," \
|
|
"512K(firmware)," \
|
|
"512K(dtb)," \
|
|
"5M(kernel)," \
|
|
"-(rootfs)"
|
|
|
|
/*
|
|
* U-Boot general configurations
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
|
/* Print buffer size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
/* Boot argument buffer size */
|
|
#define CONFIG_AUTO_COMPLETE
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_SYS_HUSH_PARSER /* enable the "hush" shell */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* secondary prompt string */
|
|
#define CONFIG_ENV_VARS_UBOOT_CONFIG
|
|
#define CONFIG_PREBOOT "run check_flash check_env;"
|
|
|
|
|
|
/*
|
|
* Boot Linux
|
|
*/
|
|
#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
|
|
#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
|
|
#define CONFIG_INITRD_TAG /* send initrd params */
|
|
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
#define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin"
|
|
#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \
|
|
__stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
|
|
" ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
|
|
|
|
#define ACFG_CONSOLE_DEV ttySMX0
|
|
#define CONFIG_BOOTCOMMAND "run ubifsboot"
|
|
#define CONFIG_SYS_AUTOLOAD "no"
|
|
/*
|
|
* Default load address for user programs and kernel
|
|
*/
|
|
#define CONFIG_LOADADDR 0xA0000000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/*
|
|
* Extra Environments
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
|
|
"consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"partition=nand0,6\0" \
|
|
"u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \
|
|
"env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \
|
|
"firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \
|
|
"firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \
|
|
"kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \
|
|
"rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \
|
|
"board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
|
|
"kernel_addr_r=A0000000\0" \
|
|
"check_env=if test -n ${flash_env_version}; " \
|
|
"then env default env_version; " \
|
|
"else env set flash_env_version ${env_version}; env save; "\
|
|
"fi; " \
|
|
"if itest ${flash_env_version} < ${env_version}; then " \
|
|
"echo \"*** Warning - Environment version" \
|
|
" change suggests: run flash_reset_env; reset\"; "\
|
|
"env default flash_reset_env; "\
|
|
"fi; \0" \
|
|
"check_flash=nand lock; nand unlock ${env_addr}; \0" \
|
|
"flash_reset_env=env default -f -a; saveenv; run update_env;" \
|
|
"echo Flash environment variables erased!\0" \
|
|
"download_uboot=tftpboot ${loadaddr} ${board_name}" \
|
|
"-u-boot-with-spl.bin\0" \
|
|
"flash_uboot=nand unlock ${u-boot_addr} ;" \
|
|
"nand erase.part u-boot;" \
|
|
"if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
|
|
"then nand lock; nand unlock ${env_addr};" \
|
|
"echo Flashing of uboot succeed;" \
|
|
"else echo Flashing of uboot failed;" \
|
|
"fi; \0" \
|
|
"update_uboot=run download_uboot flash_uboot\0" \
|
|
"download_env=tftpboot ${loadaddr} ${board_name}" \
|
|
"-u-boot-env.txt\0" \
|
|
"flash_env=env import -t ${loadaddr}; env save; \0" \
|
|
"update_env=run download_env flash_env\0" \
|
|
"update_all=run update_env update_uboot\0" \
|
|
"unlock_regs=mw 10000008 0; mw 10020008 0\0" \
|
|
|
|
/*
|
|
* Serial Driver
|
|
*/
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/*
|
|
* GPIO
|
|
*/
|
|
#define CONFIG_MXC_GPIO
|
|
|
|
/*
|
|
* NOR
|
|
*/
|
|
|
|
/*
|
|
* NAND
|
|
*/
|
|
#define CONFIG_NAND_MXC
|
|
|
|
#define CONFIG_MXC_NAND_REGS_BASE 0xD8000000
|
|
#define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#define CONFIG_MXC_NAND_HWECC
|
|
#define CONFIG_SYS_NAND_LARGEPAGE
|
|
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE
|
|
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 11
|
|
#define NAND_MAX_CHIPS 1
|
|
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
#define CONFIG_SYS_NAND_QUIET 1
|
|
|
|
/*
|
|
* Partitions & Filsystems
|
|
*/
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_SUPPORT_VFAT
|
|
|
|
/*
|
|
* UBIFS
|
|
*/
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
|
|
/*
|
|
* Ethernet (on SOC imx FEC)
|
|
*/
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x1f
|
|
#define CONFIG_MII /* MII PHY management */
|
|
|
|
/*
|
|
* FPGA
|
|
*/
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_FPGA
|
|
#endif
|
|
#define CONFIG_FPGA_COUNT 1
|
|
#define CONFIG_FPGA_XILINX
|
|
#define CONFIG_FPGA_SPARTAN3
|
|
#define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */
|
|
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
#define CONFIG_SYS_FPGA_CHECK_CTRLC
|
|
#define CONFIG_SYS_FPGA_CHECK_ERROR
|
|
|
|
/*
|
|
* Fuses - IIM
|
|
*/
|
|
#ifdef CONFIG_CMD_IMX_FUSE
|
|
#define IIM_MAC_BANK 0
|
|
#define IIM_MAC_ROW 5
|
|
#define IIM0_SCC_KEY 11
|
|
#define IIM1_SUID 1
|
|
#endif
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_I2C
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F
|
|
#define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F
|
|
#define CONFIG_SYS_I2C_NOPROBES { }
|
|
|
|
#ifdef CONFIG_CMD_EEPROM
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */
|
|
#endif /* CONFIG_CMD_EEPROM */
|
|
#endif /* CONFIG_CMD_I2C */
|
|
|
|
/*
|
|
* SD/MMC
|
|
*/
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_MXC_MMC
|
|
#define CONFIG_MXC_MCI_REGS_BASE 0x10014000
|
|
#endif
|
|
|
|
/*
|
|
* RTC
|
|
*/
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1374
|
|
#define CONFIG_SYS_RTC_BUS_NUM 0
|
|
#endif /* CONFIG_CMD_DATE */
|
|
|
|
/*
|
|
* PLL
|
|
*
|
|
* 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
|
|
* |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
|
|
*/
|
|
#define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */
|
|
|
|
#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
|
|
/* micron 64MB */
|
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */
|
|
#endif
|
|
|
|
#if (ACFG_SDRAM_MBYTE_SYZE == 128)
|
|
/* micron 128MB */
|
|
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
|
|
#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
|
|
#endif
|
|
|
|
#if (ACFG_SDRAM_MBYTE_SYZE == 256)
|
|
/* micron 256MB */
|
|
#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */
|
|
#define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|