u-boot-brain/drivers/usb/host/xhci-rockchip.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

215 lines
5.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016 Rockchip, Inc.
* Authors: Daniel Meng <daniel.meng@rock-chips.com>
*/
#include <common.h>
#include <dm.h>
#include <malloc.h>
#include <usb.h>
#include <watchdog.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include <linux/usb/dwc3.h>
#include <power/regulator.h>
#include "xhci.h"
struct rockchip_xhci_platdata {
fdt_addr_t hcd_base;
fdt_addr_t phy_base;
struct udevice *vbus_supply;
};
/*
* Contains pointers to register base addresses
* for the usb controller.
*/
struct rockchip_xhci {
struct usb_platdata usb_plat;
struct xhci_ctrl ctrl;
struct xhci_hccr *hcd;
struct dwc3 *dwc3_reg;
};
static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
{
struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
struct udevice *child;
int ret = 0;
/*
* Get the base address for XHCI controller from the device node
*/
plat->hcd_base = dev_read_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
pr_err("Can't get the XHCI register base address\n");
return -ENXIO;
}
/* Get the base address for usbphy from the device node */
for (device_find_first_child(dev, &child); child;
device_find_next_child(&child)) {
if (!device_is_compatible(child, "rockchip,rk3399-usb3-phy"))
continue;
plat->phy_base = devfdt_get_addr(child);
break;
}
if (plat->phy_base == FDT_ADDR_T_NONE) {
pr_err("Can't get the usbphy register address\n");
return -ENXIO;
}
/* Vbus regulator */
ret = device_get_supply_regulator(dev, "vbus-supply",
&plat->vbus_supply);
if (ret)
debug("Can't get VBus regulator!\n");
return 0;
}
/*
* rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core
* @dwc: Pointer to our controller context structure
* @dev: Pointer to ulcass device
*/
static void rockchip_dwc3_phy_setup(struct dwc3 *dwc3_reg,
struct udevice *dev)
{
u32 reg;
u32 utmi_bits;
/* Set dwc3 usb2 phy config */
reg = readl(&dwc3_reg->g_usb2phycfg[0]);
if (dev_read_bool(dev, "snps,dis-enblslpm-quirk"))
reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
utmi_bits = dev_read_u32_default(dev, "snps,phyif-utmi-bits", -1);
if (utmi_bits == 16) {
reg |= DWC3_GUSB2PHYCFG_PHYIF;
reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
} else if (utmi_bits == 8) {
reg &= ~DWC3_GUSB2PHYCFG_PHYIF;
reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT;
}
if (dev_read_bool(dev, "snps,dis-u2-freeclk-exists-quirk"))
reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
if (dev_read_bool(dev, "snps,dis-u2-susphy-quirk"))
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
writel(reg, &dwc3_reg->g_usb2phycfg[0]);
}
static int rockchip_xhci_core_init(struct rockchip_xhci *rkxhci,
struct udevice *dev)
{
int ret;
ret = dwc3_core_init(rkxhci->dwc3_reg);
if (ret) {
pr_err("failed to initialize core\n");
return ret;
}
rockchip_dwc3_phy_setup(rkxhci->dwc3_reg, dev);
/* We are hard-coding DWC3 core to Host Mode */
dwc3_set_mode(rkxhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
return 0;
}
static int rockchip_xhci_core_exit(struct rockchip_xhci *rkxhci)
{
return 0;
}
static int xhci_usb_probe(struct udevice *dev)
{
struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
struct rockchip_xhci *ctx = dev_get_priv(dev);
struct xhci_hcor *hcor;
int ret;
ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd +
HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
if (plat->vbus_supply) {
ret = regulator_set_enable(plat->vbus_supply, true);
if (ret) {
pr_err("XHCI: failed to set VBus supply\n");
return ret;
}
}
ret = rockchip_xhci_core_init(ctx, dev);
if (ret) {
pr_err("XHCI: failed to initialize controller\n");
return ret;
}
return xhci_register(dev, ctx->hcd, hcor);
}
static int xhci_usb_remove(struct udevice *dev)
{
struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
struct rockchip_xhci *ctx = dev_get_priv(dev);
int ret;
ret = xhci_deregister(dev);
if (ret)
return ret;
ret = rockchip_xhci_core_exit(ctx);
if (ret)
return ret;
if (plat->vbus_supply) {
ret = regulator_set_enable(plat->vbus_supply, false);
if (ret)
pr_err("XHCI: failed to set VBus supply\n");
}
return ret;
}
static const struct udevice_id xhci_usb_ids[] = {
{ .compatible = "rockchip,rk3399-xhci" },
{ .compatible = "rockchip,rk3328-xhci" },
{ }
};
U_BOOT_DRIVER(usb_xhci) = {
.name = "xhci_rockchip",
.id = UCLASS_USB,
.of_match = xhci_usb_ids,
.ofdata_to_platdata = xhci_usb_ofdata_to_platdata,
.probe = xhci_usb_probe,
.remove = xhci_usb_remove,
.ops = &xhci_usb_ops,
.bind = dm_scan_fdt_dev,
.platdata_auto_alloc_size = sizeof(struct rockchip_xhci_platdata),
.priv_auto_alloc_size = sizeof(struct rockchip_xhci),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
static const struct udevice_id usb_phy_ids[] = {
{ .compatible = "rockchip,rk3399-usb3-phy" },
{ .compatible = "rockchip,rk3328-usb3-phy" },
{ }
};
U_BOOT_DRIVER(usb_phy) = {
.name = "usb_phy_rockchip",
.of_match = usb_phy_ids,
};