Jeffrey Mann ada4697d02 [PATCH] Run new sequoia boards with an EBC speed of 83MHz ... Because the Sequoia board does not boot with an EBC faster than 66MHz, the clock divider are changed after the initial boot process. This allows for maximum clocking speeds to be achieved on newer boards. Sequoia boards with 666.66 MHz processors require that the EBC divider be set to 3 in order to start the initial boot process at a slower EBC speed. After the initial boot process, the divider can be set back to 2, which will cause the boards to run at 83.333MHz. This is backward compatible with boards with 533.33 MHz processors, as these boards will already be set with an EBC divider of 2. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>		2007-05-16 13:23:10 +02:00
..
acadia	ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM	2007-04-18 12:07:47 +02:00
bamboo	ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver	2007-04-29 14:13:01 +02:00
bubinga	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
common	Code cleanup	2006-08-27 18:10:01 +02:00
ebony	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board	2007-03-16 21:11:42 +01:00
katmai	ppc4xx: Change SysACE address on Katmai	2007-04-02 10:09:30 +02:00
luan	[PATCH] Update AMCC Luan 440SP eval board support	2007-03-08 10:13:16 +01:00
ocotea	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board	2007-03-07 16:43:00 +01:00
sequoia	[PATCH] Run new sequoia boards with an EBC speed of 83MHz	2007-05-16 13:23:10 +02:00
taishan	Minor code cleanup.	2007-01-19 23:08:39 +01:00
walnut	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
yosemite	[PATCH] Merge Yosemite & Yellowstone board ports	2007-01-30 17:04:19 +01:00
yucca	[PATCH] Update AMCC Yucca 440SPe eval board support	2007-03-08 10:10:18 +01:00