mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Tom Wai-Hong Tam](/assets/img/avatar_default.png)
This adds driver support for the TPS65090 PMU. Support includes hooking into the pmic infrastructure so that the pmic commands can be used on the console. The TPS65090 supports the following functionality: - fet enable/disable/querying - getting and setting of charge state Even though it is connected to the pmic infrastructure it does not hook into the pmic charging charging infrastructure. The device tree binding is from Linux, but only a small subset of functionality is supported. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Signed-off-by: Rong Chang <rongchang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
311 lines
6.2 KiB
C
311 lines
6.2 KiB
C
/*
|
|
* Copyright (c) 2012 The Chromium OS Authors.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <power/pmic.h>
|
|
#include <power/tps65090_pmic.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define TPS65090_NAME "TPS65090_PMIC"
|
|
|
|
/* TPS65090 register addresses */
|
|
enum {
|
|
REG_IRQ1 = 0,
|
|
REG_CG_CTRL0 = 4,
|
|
REG_CG_STATUS1 = 0xa,
|
|
REG_FET1_CTRL = 0x0f,
|
|
REG_FET2_CTRL,
|
|
REG_FET3_CTRL,
|
|
REG_FET4_CTRL,
|
|
REG_FET5_CTRL,
|
|
REG_FET6_CTRL,
|
|
REG_FET7_CTRL,
|
|
TPS65090_NUM_REGS,
|
|
};
|
|
|
|
enum {
|
|
IRQ1_VBATG = 1 << 3,
|
|
CG_CTRL0_ENC_MASK = 0x01,
|
|
|
|
MAX_FET_NUM = 7,
|
|
MAX_CTRL_READ_TRIES = 5,
|
|
|
|
/* TPS65090 FET_CTRL register values */
|
|
FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
|
|
FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
|
|
FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
|
|
FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
|
|
FET_CTRL_ENFET = 1 << 0, /* Enable FET */
|
|
};
|
|
|
|
/**
|
|
* Checks for a valid FET number
|
|
*
|
|
* @param fet_id FET number to check
|
|
* @return 0 if ok, -EINVAL if FET value is out of range
|
|
*/
|
|
static int tps65090_check_fet(unsigned int fet_id)
|
|
{
|
|
if (fet_id == 0 || fet_id > MAX_FET_NUM) {
|
|
debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
|
|
fet_id, MAX_FET_NUM);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Set the power state for a FET
|
|
*
|
|
* @param pmic pmic structure for the tps65090
|
|
* @param fet_id Fet number to set (1..MAX_FET_NUM)
|
|
* @param set 1 to power on FET, 0 to power off
|
|
* @return -EIO if we got a comms error, -EAGAIN if the FET failed to
|
|
* change state. If all is ok, returns 0.
|
|
*/
|
|
static int tps65090_fet_set(struct pmic *pmic, int fet_id, bool set)
|
|
{
|
|
int retry;
|
|
u32 reg, value;
|
|
|
|
value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
|
|
if (set)
|
|
value |= FET_CTRL_ENFET;
|
|
|
|
if (pmic_reg_write(pmic, REG_FET1_CTRL + fet_id - 1, value))
|
|
return -EIO;
|
|
|
|
/* Try reading until we get a result */
|
|
for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
|
|
if (pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, ®))
|
|
return -EIO;
|
|
|
|
/* Check that the fet went into the expected state */
|
|
if (!!(reg & FET_CTRL_PGFET) == set)
|
|
return 0;
|
|
|
|
/* If we got a timeout, there is no point in waiting longer */
|
|
if (reg & FET_CTRL_TOFET)
|
|
break;
|
|
|
|
mdelay(1);
|
|
}
|
|
|
|
debug("FET %d: Power good should have set to %d but reg=%#02x\n",
|
|
fet_id, set, reg);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
int tps65090_fet_enable(unsigned int fet_id)
|
|
{
|
|
struct pmic *pmic;
|
|
ulong start;
|
|
int loops;
|
|
int ret;
|
|
|
|
ret = tps65090_check_fet(fet_id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pmic = pmic_get(TPS65090_NAME);
|
|
if (!pmic)
|
|
return -EACCES;
|
|
|
|
start = get_timer(0);
|
|
for (loops = 0;; loops++) {
|
|
ret = tps65090_fet_set(pmic, fet_id, true);
|
|
if (!ret)
|
|
break;
|
|
|
|
if (get_timer(start) > 100)
|
|
break;
|
|
|
|
/* Turn it off and try again until we time out */
|
|
tps65090_fet_set(pmic, fet_id, false);
|
|
}
|
|
|
|
if (ret)
|
|
debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
|
|
__func__, fet_id, get_timer(start), loops);
|
|
else if (loops)
|
|
debug("%s: FET%d powered on after %lums, loops=%d\n",
|
|
__func__, fet_id, get_timer(start), loops);
|
|
|
|
/*
|
|
* Unfortunately, there are some conditions where the power
|
|
* good bit will be 0, but the fet still comes up. One such
|
|
* case occurs with the lcd backlight. We'll just return 0 here
|
|
* and assume that the fet will eventually come up.
|
|
*/
|
|
if (ret == -EAGAIN)
|
|
ret = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int tps65090_fet_disable(unsigned int fet_id)
|
|
{
|
|
struct pmic *pmic;
|
|
int ret;
|
|
|
|
ret = tps65090_check_fet(fet_id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pmic = pmic_get(TPS65090_NAME);
|
|
if (!pmic)
|
|
return -EACCES;
|
|
ret = tps65090_fet_set(pmic, fet_id, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int tps65090_fet_is_enabled(unsigned int fet_id)
|
|
{
|
|
struct pmic *pmic;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
ret = tps65090_check_fet(fet_id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pmic = pmic_get(TPS65090_NAME);
|
|
if (!pmic)
|
|
return -ENODEV;
|
|
ret = pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, ®);
|
|
if (ret) {
|
|
debug("fail to read FET%u_CTRL register over I2C", fet_id);
|
|
return -EIO;
|
|
}
|
|
|
|
return reg & FET_CTRL_ENFET;
|
|
}
|
|
|
|
int tps65090_get_charging(void)
|
|
{
|
|
struct pmic *pmic;
|
|
u32 val;
|
|
int ret;
|
|
|
|
pmic = pmic_get(TPS65090_NAME);
|
|
if (!pmic)
|
|
return -EACCES;
|
|
|
|
ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & CG_CTRL0_ENC_MASK);
|
|
}
|
|
|
|
static int tps65090_charger_state(struct pmic *pmic, int state,
|
|
int current)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
|
|
if (!ret) {
|
|
if (state == PMIC_CHARGER_ENABLE)
|
|
val |= CG_CTRL0_ENC_MASK;
|
|
else
|
|
val &= ~CG_CTRL0_ENC_MASK;
|
|
ret = pmic_reg_write(pmic, REG_CG_CTRL0, val);
|
|
}
|
|
if (ret) {
|
|
debug("%s: Failed to read/write register\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tps65090_get_status(void)
|
|
{
|
|
struct pmic *pmic;
|
|
u32 val;
|
|
int ret;
|
|
|
|
pmic = pmic_get(TPS65090_NAME);
|
|
if (!pmic)
|
|
return -EACCES;
|
|
|
|
ret = pmic_reg_read(pmic, REG_CG_STATUS1, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int tps65090_charger_bat_present(struct pmic *pmic)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = pmic_reg_read(pmic, REG_IRQ1, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & IRQ1_VBATG);
|
|
}
|
|
|
|
static struct power_chrg power_chrg_pmic_ops = {
|
|
.chrg_bat_present = tps65090_charger_bat_present,
|
|
.chrg_state = tps65090_charger_state,
|
|
};
|
|
|
|
int tps65090_init(void)
|
|
{
|
|
struct pmic *p;
|
|
int bus;
|
|
int addr;
|
|
const void *blob = gd->fdt_blob;
|
|
int node, parent;
|
|
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_TI_TPS65090);
|
|
if (node < 0) {
|
|
debug("PMIC: No node for PMIC Chip in device tree\n");
|
|
debug("node = %d\n", node);
|
|
return -ENODEV;
|
|
}
|
|
|
|
parent = fdt_parent_offset(blob, node);
|
|
if (parent < 0) {
|
|
debug("%s: Cannot find node parent\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bus = i2c_get_bus_num_fdt(parent);
|
|
if (p->bus < 0) {
|
|
debug("%s: Cannot find I2C bus\n", __func__);
|
|
return -ENOENT;
|
|
}
|
|
addr = fdtdec_get_int(blob, node, "reg", TPS65090_I2C_ADDR);
|
|
p = pmic_alloc();
|
|
if (!p) {
|
|
printf("%s: POWER allocation error!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
p->name = TPS65090_NAME;
|
|
p->bus = bus;
|
|
p->interface = PMIC_I2C;
|
|
p->number_of_regs = TPS65090_NUM_REGS;
|
|
p->hw.i2c.addr = addr;
|
|
p->hw.i2c.tx_num = 1;
|
|
p->chrg = &power_chrg_pmic_ops;
|
|
|
|
puts("TPS65090 PMIC init\n");
|
|
|
|
return 0;
|
|
}
|