mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![wdenk](/assets/img/avatar_default.png)
Add support for the Xilinx ML300 platform * Patch by Stephan Linz, 17 Feb 2004: Fix watchdog support for NIOS * Patch by Josh Fryman, 16 Feb 2004: Fix byte-swapping for cfi_flash.c for different bus widths * Patch by Jon Diekema, 14 Jeb 2004: Remove duplicate "FPGA Support" notes from the README file
845 lines
28 KiB
C
845 lines
28 KiB
C
/******************************************************************************
|
|
*
|
|
* Author: Xilinx, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*
|
|
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
|
|
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
|
|
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
|
|
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
|
|
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
|
|
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
|
|
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
|
|
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
|
|
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
|
|
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
|
|
* FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
*
|
|
* Xilinx hardware products are not intended for use in life support
|
|
* appliances, devices, or systems. Use in such applications is
|
|
* expressly prohibited.
|
|
*
|
|
*
|
|
* (c) Copyright 2002-2004 Xilinx Inc.
|
|
* All rights reserved.
|
|
*
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
******************************************************************************/
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* @file xemac.c
|
|
*
|
|
* The XEmac driver. Functions in this file are the minimum required functions
|
|
* for this driver. See xemac.h for a detailed description of the driver.
|
|
*
|
|
* <pre>
|
|
* MODIFICATION HISTORY:
|
|
*
|
|
* Ver Who Date Changes
|
|
* ----- ---- -------- -------------------------------------------------------
|
|
* 1.00a rpm 07/31/01 First release
|
|
* 1.00b rpm 02/20/02 Repartitioned files and functions
|
|
* 1.00b rpm 07/23/02 Removed the PHY reset from Initialize()
|
|
* 1.00b rmm 09/23/02 Removed commented code in Initialize(). Recycled as
|
|
* XEmac_mPhyReset macro in xemac_l.h.
|
|
* 1.00c rpm 12/05/02 New version includes support for simple DMA
|
|
* 1.00c rpm 12/12/02 Changed location of IsStarted assignment in XEmac_Start
|
|
* to be sure the flag is set before the device and
|
|
* interrupts are enabled.
|
|
* 1.00c rpm 02/03/03 SelfTest was not clearing polled mode. Take driver out
|
|
* of polled mode in XEmac_Reset() to fix this problem.
|
|
* 1.00c rmm 05/13/03 Fixed diab compiler warnings relating to asserts.
|
|
* </pre>
|
|
******************************************************************************/
|
|
|
|
/***************************** Include Files *********************************/
|
|
|
|
#include "xbasic_types.h"
|
|
#include "xemac_i.h"
|
|
#include "xio.h"
|
|
#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
|
|
|
|
/************************** Constant Definitions *****************************/
|
|
|
|
/**************************** Type Definitions *******************************/
|
|
|
|
/***************** Macros (Inline Functions) Definitions *********************/
|
|
|
|
/************************** Function Prototypes ******************************/
|
|
|
|
static XStatus ConfigureDma(XEmac * InstancePtr);
|
|
static XStatus ConfigureFifo(XEmac * InstancePtr);
|
|
static void StubFifoHandler(void *CallBackRef);
|
|
static void StubErrorHandler(void *CallBackRef, XStatus ErrorCode);
|
|
static void StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr,
|
|
u32 NumBds);
|
|
|
|
/************************** Variable Definitions *****************************/
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Initialize a specific XEmac instance/driver. The initialization entails:
|
|
* - Initialize fields of the XEmac structure
|
|
* - Clear the Ethernet statistics for this device
|
|
* - Initialize the IPIF component with its register base address
|
|
* - Configure the FIFO components with their register base addresses.
|
|
* - If the device is configured with DMA, configure the DMA channel components
|
|
* with their register base addresses. At some later time, memory pools for
|
|
* the scatter-gather descriptor lists may be passed to the driver.
|
|
* - Reset the Ethernet MAC
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
* @param DeviceId is the unique id of the device controlled by this XEmac
|
|
* instance. Passing in a device id associates the generic XEmac
|
|
* instance to a specific device, as chosen by the caller or application
|
|
* developer.
|
|
*
|
|
* @return
|
|
*
|
|
* - XST_SUCCESS if initialization was successful
|
|
* - XST_DEVICE_IS_STARTED if the device has already been started
|
|
* - XST_DEVICE_NOT_FOUND if device configuration information was not found for
|
|
* a device with the supplied device ID.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
XStatus
|
|
XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId)
|
|
{
|
|
XStatus Result;
|
|
XEmac_Config *ConfigPtr; /* configuration information */
|
|
|
|
XASSERT_NONVOID(InstancePtr != NULL);
|
|
|
|
/*
|
|
* If the device is started, disallow the initialize and return a status
|
|
* indicating it is started. This allows the user to stop the device
|
|
* and reinitialize, but prevents a user from inadvertently initializing
|
|
*/
|
|
if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
|
|
return XST_DEVICE_IS_STARTED;
|
|
}
|
|
|
|
/*
|
|
* Lookup the device configuration in the temporary CROM table. Use this
|
|
* configuration info down below when initializing this component.
|
|
*/
|
|
ConfigPtr = XEmac_LookupConfig(DeviceId);
|
|
if (ConfigPtr == NULL) {
|
|
return XST_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
/*
|
|
* Set some default values
|
|
*/
|
|
InstancePtr->IsReady = 0;
|
|
InstancePtr->IsStarted = 0;
|
|
InstancePtr->IpIfDmaConfig = ConfigPtr->IpIfDmaConfig;
|
|
InstancePtr->HasMii = ConfigPtr->HasMii;
|
|
InstancePtr->HasMulticastHash = FALSE;
|
|
|
|
/* Always default polled to false, let user configure this mode */
|
|
InstancePtr->IsPolled = FALSE;
|
|
InstancePtr->FifoRecvHandler = StubFifoHandler;
|
|
InstancePtr->FifoSendHandler = StubFifoHandler;
|
|
InstancePtr->ErrorHandler = StubErrorHandler;
|
|
InstancePtr->SgRecvHandler = StubSgHandler;
|
|
InstancePtr->SgSendHandler = StubSgHandler;
|
|
|
|
/*
|
|
* Clear the statistics for this driver
|
|
*/
|
|
XEmac_mClearStruct((u8 *) & InstancePtr->Stats, sizeof (XEmac_Stats));
|
|
|
|
/*
|
|
* Initialize the device register base addresses
|
|
*/
|
|
InstancePtr->BaseAddress = ConfigPtr->BaseAddress;
|
|
|
|
/*
|
|
* Configure the send and receive FIFOs in the MAC
|
|
*/
|
|
Result = ConfigureFifo(InstancePtr);
|
|
if (Result != XST_SUCCESS) {
|
|
return Result;
|
|
}
|
|
|
|
/*
|
|
* If the device is configured for DMA, configure the send and receive DMA
|
|
* channels in the MAC.
|
|
*/
|
|
if (XEmac_mIsDma(InstancePtr)) {
|
|
Result = ConfigureDma(InstancePtr);
|
|
if (Result != XST_SUCCESS) {
|
|
return Result;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Indicate the component is now ready to use. Note that this is done before
|
|
* we reset the device and the PHY below, which may seem a bit odd. The
|
|
* choice was made to move it here rather than remove the asserts in various
|
|
* functions (e.g., Reset() and all functions that it calls). Applications
|
|
* that use multiple threads, one to initialize the XEmac driver and one
|
|
* waiting on the IsReady condition could have a problem with this sequence.
|
|
*/
|
|
InstancePtr->IsReady = XCOMPONENT_IS_READY;
|
|
|
|
/*
|
|
* Reset the MAC to get it into its initial state. It is expected that
|
|
* device configuration by the user will take place after this
|
|
* initialization is done, but before the device is started.
|
|
*/
|
|
XEmac_Reset(InstancePtr);
|
|
|
|
return XST_SUCCESS;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Start the Ethernet controller as follows:
|
|
* - If not in polled mode
|
|
* - Set the internal interrupt enable registers appropriately
|
|
* - Enable interrupts within the device itself. Note that connection of
|
|
* the driver's interrupt handler to the interrupt source (typically
|
|
* done using the interrupt controller component) is done by the higher
|
|
* layer software.
|
|
* - If the device is configured with scatter-gather DMA, start the DMA
|
|
* channels if the descriptor lists are not empty
|
|
* - Enable the transmitter
|
|
* - Enable the receiver
|
|
*
|
|
* The PHY is enabled after driver initialization. We assume the upper layer
|
|
* software has configured it and the EMAC appropriately before this function
|
|
* is called.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
*
|
|
* @return
|
|
*
|
|
* - XST_SUCCESS if the device was started successfully
|
|
* - XST_NO_CALLBACK if a callback function has not yet been registered using
|
|
* the SetxxxHandler function. This is required if in interrupt mode.
|
|
* - XST_DEVICE_IS_STARTED if the device is already started
|
|
* - XST_DMA_SG_NO_LIST if configured for scatter-gather DMA and a descriptor
|
|
* list has not yet been created for the send or receive channel.
|
|
*
|
|
* @note
|
|
*
|
|
* The driver tries to match the hardware configuration. So if the hardware
|
|
* is configured with scatter-gather DMA, the driver expects to start the
|
|
* scatter-gather channels and expects that the user has set up the buffer
|
|
* descriptor lists already. If the user expects to use the driver in a mode
|
|
* different than how the hardware is configured, the user should modify the
|
|
* configuration table to reflect the mode to be used. Modifying the config
|
|
* table is a workaround for now until we get some experience with how users
|
|
* are intending to use the hardware in its different configurations. For
|
|
* example, if the hardware is built with scatter-gather DMA but the user is
|
|
* intending to use only simple DMA, the user either needs to modify the config
|
|
* table as a workaround or rebuild the hardware with only simple DMA.
|
|
*
|
|
* This function makes use of internal resources that are shared between the
|
|
* Start, Stop, and SetOptions functions. So if one task might be setting device
|
|
* options while another is trying to start the device, the user is required to
|
|
* provide protection of this shared data (typically using a semaphore).
|
|
*
|
|
******************************************************************************/
|
|
XStatus
|
|
XEmac_Start(XEmac * InstancePtr)
|
|
{
|
|
u32 ControlReg;
|
|
XStatus Result;
|
|
|
|
XASSERT_NONVOID(InstancePtr != NULL);
|
|
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
|
|
|
|
/*
|
|
* If it is already started, return a status indicating so
|
|
*/
|
|
if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
|
|
return XST_DEVICE_IS_STARTED;
|
|
}
|
|
|
|
/*
|
|
* If not polled, enable interrupts
|
|
*/
|
|
if (!InstancePtr->IsPolled) {
|
|
/*
|
|
* Verify that the callbacks have been registered, then enable
|
|
* interrupts
|
|
*/
|
|
if (XEmac_mIsSgDma(InstancePtr)) {
|
|
if ((InstancePtr->SgRecvHandler == StubSgHandler) ||
|
|
(InstancePtr->SgSendHandler == StubSgHandler)) {
|
|
return XST_NO_CALLBACK;
|
|
}
|
|
|
|
/* Enable IPIF interrupts */
|
|
XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
|
|
XEM_IPIF_DMA_DFT_MASK |
|
|
XIIF_V123B_ERROR_MASK);
|
|
XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
|
|
XEM_EIR_DFT_SG_MASK);
|
|
|
|
/* Enable scatter-gather DMA interrupts */
|
|
XDmaChannel_SetIntrEnable(&InstancePtr->RecvChannel,
|
|
XEM_DMA_SG_INTR_MASK);
|
|
XDmaChannel_SetIntrEnable(&InstancePtr->SendChannel,
|
|
XEM_DMA_SG_INTR_MASK);
|
|
} else {
|
|
if ((InstancePtr->FifoRecvHandler == StubFifoHandler) ||
|
|
(InstancePtr->FifoSendHandler == StubFifoHandler)) {
|
|
return XST_NO_CALLBACK;
|
|
}
|
|
|
|
/* Enable IPIF interrupts (used by simple DMA also) */
|
|
XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
|
|
XEM_IPIF_FIFO_DFT_MASK |
|
|
XIIF_V123B_ERROR_MASK);
|
|
XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
|
|
XEM_EIR_DFT_FIFO_MASK);
|
|
}
|
|
|
|
/* Enable the global IPIF interrupt output */
|
|
XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
|
|
}
|
|
|
|
/*
|
|
* Indicate that the device is started before we enable the transmitter
|
|
* or receiver. This needs to be done before because as soon as the
|
|
* receiver is enabled we may get an interrupt, and there are functions
|
|
* in the interrupt handling path that rely on the IsStarted flag.
|
|
*/
|
|
InstancePtr->IsStarted = XCOMPONENT_IS_STARTED;
|
|
|
|
/*
|
|
* Enable the transmitter, and receiver (do a read/modify/write to preserve
|
|
* current settings). There is no critical section here since this register
|
|
* is not modified during interrupt context.
|
|
*/
|
|
ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
|
|
ControlReg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
|
|
ControlReg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
|
|
|
|
XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
|
|
|
|
/*
|
|
* If configured with scatter-gather DMA and not polled, restart the
|
|
* DMA channels in case there are buffers ready to be sent or received into.
|
|
* The DMA SgStart function uses data that can be modified during interrupt
|
|
* context, so a critical section is required here.
|
|
*/
|
|
if ((XEmac_mIsSgDma(InstancePtr)) && (!InstancePtr->IsPolled)) {
|
|
XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
|
|
|
|
/*
|
|
* The only error we care about is if the list has not yet been
|
|
* created, or on receive, if no buffer descriptors have been
|
|
* added yet (the list is empty). Other errors are benign at this point.
|
|
*/
|
|
Result = XDmaChannel_SgStart(&InstancePtr->RecvChannel);
|
|
if ((Result == XST_DMA_SG_NO_LIST)
|
|
|| (Result == XST_DMA_SG_LIST_EMPTY)) {
|
|
XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
|
|
return Result;
|
|
}
|
|
|
|
Result = XDmaChannel_SgStart(&InstancePtr->SendChannel);
|
|
if (Result == XST_DMA_SG_NO_LIST) {
|
|
XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
|
|
return Result;
|
|
}
|
|
|
|
XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
|
|
}
|
|
|
|
return XST_SUCCESS;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Stop the Ethernet MAC as follows:
|
|
* - If the device is configured with scatter-gather DMA, stop the DMA
|
|
* channels (wait for acknowledgment of stop)
|
|
* - Disable the transmitter and receiver
|
|
* - Disable interrupts if not in polled mode (the higher layer software is
|
|
* responsible for disabling interrupts at the interrupt controller)
|
|
*
|
|
* The PHY is left enabled after a Stop is called.
|
|
*
|
|
* If the device is configured for scatter-gather DMA, the DMA engine stops at
|
|
* the next buffer descriptor in its list. The remaining descriptors in the list
|
|
* are not removed, so anything in the list will be transmitted or received when
|
|
* the device is restarted. The side effect of doing this is that the last
|
|
* buffer descriptor processed by the DMA engine before stopping may not be the
|
|
* last descriptor in the Ethernet frame. So when the device is restarted, a
|
|
* partial frame (i.e., a bad frame) may be transmitted/received. This is only a
|
|
* concern if a frame can span multiple buffer descriptors, which is dependent
|
|
* on the size of the network buffers.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
*
|
|
* @return
|
|
*
|
|
* - XST_SUCCESS if the device was stopped successfully
|
|
* - XST_DEVICE_IS_STOPPED if the device is already stopped
|
|
*
|
|
* @note
|
|
*
|
|
* This function makes use of internal resources that are shared between the
|
|
* Start, Stop, and SetOptions functions. So if one task might be setting device
|
|
* options while another is trying to start the device, the user is required to
|
|
* provide protection of this shared data (typically using a semaphore).
|
|
*
|
|
******************************************************************************/
|
|
XStatus
|
|
XEmac_Stop(XEmac * InstancePtr)
|
|
{
|
|
u32 ControlReg;
|
|
|
|
XASSERT_NONVOID(InstancePtr != NULL);
|
|
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
|
|
|
|
/*
|
|
* If the device is already stopped, do nothing but return a status
|
|
* indicating so
|
|
*/
|
|
if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
|
|
return XST_DEVICE_IS_STOPPED;
|
|
}
|
|
|
|
/*
|
|
* If configured for scatter-gather DMA, stop the DMA channels. Ignore
|
|
* the XST_DMA_SG_IS_STOPPED return code. There is a critical section
|
|
* here between SgStart and SgStop, and SgStart can be called in interrupt
|
|
* context, so disable interrupts while calling SgStop.
|
|
*/
|
|
if (XEmac_mIsSgDma(InstancePtr)) {
|
|
XBufDescriptor *BdTemp; /* temporary descriptor pointer */
|
|
|
|
XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
|
|
|
|
(void) XDmaChannel_SgStop(&InstancePtr->SendChannel, &BdTemp);
|
|
(void) XDmaChannel_SgStop(&InstancePtr->RecvChannel, &BdTemp);
|
|
|
|
XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
|
|
}
|
|
|
|
/*
|
|
* Disable the transmitter and receiver. There is no critical section
|
|
* here since this register is not modified during interrupt context.
|
|
*/
|
|
ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
|
|
ControlReg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
|
|
XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
|
|
|
|
/*
|
|
* If not in polled mode, disable interrupts for IPIF (includes MAC and
|
|
* DMAs)
|
|
*/
|
|
if (!InstancePtr->IsPolled) {
|
|
XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
|
|
}
|
|
|
|
InstancePtr->IsStarted = 0;
|
|
|
|
return XST_SUCCESS;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Reset the Ethernet MAC. This is a graceful reset in that the device is stopped
|
|
* first. Resets the DMA channels, the FIFOs, the transmitter, and the receiver.
|
|
* The PHY is not reset. Any frames in the scatter-gather descriptor lists will
|
|
* remain in the lists. The side effect of doing this is that after a reset and
|
|
* following a restart of the device, frames that were in the list before the
|
|
* reset may be transmitted or received. Reset must only be called after the
|
|
* driver has been initialized.
|
|
*
|
|
* The driver is also taken out of polled mode if polled mode was set. The user
|
|
* is responsbile for re-configuring the driver into polled mode after the
|
|
* reset if desired.
|
|
*
|
|
* The configuration after this reset is as follows:
|
|
* - Half duplex
|
|
* - Disabled transmitter and receiver
|
|
* - Enabled PHY (the PHY is not reset)
|
|
* - MAC transmitter does pad insertion, FCS insertion, and source address
|
|
* overwrite.
|
|
* - MAC receiver does not strip padding or FCS
|
|
* - Interframe Gap as recommended by IEEE Std. 802.3 (96 bit times)
|
|
* - Unicast addressing enabled
|
|
* - Broadcast addressing enabled
|
|
* - Multicast addressing disabled (addresses are preserved)
|
|
* - Promiscuous addressing disabled
|
|
* - Default packet threshold and packet wait bound register values for
|
|
* scatter-gather DMA operation
|
|
* - MAC address of all zeros
|
|
* - Non-polled mode
|
|
*
|
|
* The upper layer software is responsible for re-configuring (if necessary)
|
|
* and restarting the MAC after the reset. Note that the PHY is not reset. PHY
|
|
* control is left to the upper layer software. Note also that driver statistics
|
|
* are not cleared on reset. It is up to the upper layer software to clear the
|
|
* statistics if needed.
|
|
*
|
|
* When a reset is required due to an internal error, the driver notifies the
|
|
* upper layer software of this need through the ErrorHandler callback and
|
|
* specific status codes. The upper layer software is responsible for calling
|
|
* this Reset function and then re-configuring the device.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
*
|
|
* @return
|
|
*
|
|
* None.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
* @internal
|
|
*
|
|
* The reset is accomplished by setting the IPIF reset register. This takes
|
|
* care of resetting all hardware blocks, including the MAC.
|
|
*
|
|
******************************************************************************/
|
|
void
|
|
XEmac_Reset(XEmac * InstancePtr)
|
|
{
|
|
XASSERT_VOID(InstancePtr != NULL);
|
|
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
|
|
|
|
/*
|
|
* Stop the device first
|
|
*/
|
|
(void) XEmac_Stop(InstancePtr);
|
|
|
|
/*
|
|
* Take the driver out of polled mode
|
|
*/
|
|
InstancePtr->IsPolled = FALSE;
|
|
|
|
/*
|
|
* Reset the entire IPIF at once. If we choose someday to reset each
|
|
* hardware block separately, the reset should occur in the direction of
|
|
* data flow. For example, for the send direction the reset order is DMA
|
|
* first, then FIFO, then the MAC transmitter.
|
|
*/
|
|
XIIF_V123B_RESET(InstancePtr->BaseAddress);
|
|
|
|
if (XEmac_mIsSgDma(InstancePtr)) {
|
|
/*
|
|
* After reset, configure the scatter-gather DMA packet threshold and
|
|
* packet wait bound registers to default values. Ignore the return
|
|
* values of these functions since they only return error if the device
|
|
* is not stopped.
|
|
*/
|
|
(void) XEmac_SetPktThreshold(InstancePtr, XEM_SEND,
|
|
XEM_SGDMA_DFT_THRESHOLD);
|
|
(void) XEmac_SetPktThreshold(InstancePtr, XEM_RECV,
|
|
XEM_SGDMA_DFT_THRESHOLD);
|
|
(void) XEmac_SetPktWaitBound(InstancePtr, XEM_SEND,
|
|
XEM_SGDMA_DFT_WAITBOUND);
|
|
(void) XEmac_SetPktWaitBound(InstancePtr, XEM_RECV,
|
|
XEM_SGDMA_DFT_WAITBOUND);
|
|
}
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Set the MAC address for this driver/device. The address is a 48-bit value.
|
|
* The device must be stopped before calling this function.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
* @param AddressPtr is a pointer to a 6-byte MAC address.
|
|
*
|
|
* @return
|
|
*
|
|
* - XST_SUCCESS if the MAC address was set successfully
|
|
* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
XStatus
|
|
XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr)
|
|
{
|
|
u32 MacAddr = 0;
|
|
|
|
XASSERT_NONVOID(InstancePtr != NULL);
|
|
XASSERT_NONVOID(AddressPtr != NULL);
|
|
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
|
|
|
|
/*
|
|
* The device must be stopped before setting the MAC address
|
|
*/
|
|
if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
|
|
return XST_DEVICE_IS_STARTED;
|
|
}
|
|
|
|
/*
|
|
* Set the device station address high and low registers
|
|
*/
|
|
MacAddr = (AddressPtr[0] << 8) | AddressPtr[1];
|
|
XIo_Out32(InstancePtr->BaseAddress + XEM_SAH_OFFSET, MacAddr);
|
|
|
|
MacAddr = (AddressPtr[2] << 24) | (AddressPtr[3] << 16) |
|
|
(AddressPtr[4] << 8) | AddressPtr[5];
|
|
|
|
XIo_Out32(InstancePtr->BaseAddress + XEM_SAL_OFFSET, MacAddr);
|
|
|
|
return XST_SUCCESS;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Get the MAC address for this driver/device.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
* @param BufferPtr is an output parameter, and is a pointer to a buffer into
|
|
* which the current MAC address will be copied. The buffer must be at
|
|
* least 6 bytes.
|
|
*
|
|
* @return
|
|
*
|
|
* None.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
void
|
|
XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr)
|
|
{
|
|
u32 MacAddrHi;
|
|
u32 MacAddrLo;
|
|
|
|
XASSERT_VOID(InstancePtr != NULL);
|
|
XASSERT_VOID(BufferPtr != NULL);
|
|
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
|
|
|
|
MacAddrHi = XIo_In32(InstancePtr->BaseAddress + XEM_SAH_OFFSET);
|
|
MacAddrLo = XIo_In32(InstancePtr->BaseAddress + XEM_SAL_OFFSET);
|
|
|
|
BufferPtr[0] = (u8) (MacAddrHi >> 8);
|
|
BufferPtr[1] = (u8) MacAddrHi;
|
|
BufferPtr[2] = (u8) (MacAddrLo >> 24);
|
|
BufferPtr[3] = (u8) (MacAddrLo >> 16);
|
|
BufferPtr[4] = (u8) (MacAddrLo >> 8);
|
|
BufferPtr[5] = (u8) MacAddrLo;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/**
|
|
*
|
|
* Configure DMA capabilities.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
*
|
|
* @return
|
|
*
|
|
* - XST_SUCCESS if successful initialization of DMA
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
static XStatus
|
|
ConfigureDma(XEmac * InstancePtr)
|
|
{
|
|
XStatus Result;
|
|
|
|
/*
|
|
* Initialize the DMA channels with their base addresses. We assume
|
|
* scatter-gather DMA is the only possible configuration. Descriptor space
|
|
* will need to be set later by the upper layer.
|
|
*/
|
|
Result = XDmaChannel_Initialize(&InstancePtr->RecvChannel,
|
|
InstancePtr->BaseAddress +
|
|
XEM_DMA_RECV_OFFSET);
|
|
if (Result != XST_SUCCESS) {
|
|
return Result;
|
|
}
|
|
|
|
Result = XDmaChannel_Initialize(&InstancePtr->SendChannel,
|
|
InstancePtr->BaseAddress +
|
|
XEM_DMA_SEND_OFFSET);
|
|
|
|
return Result;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/**
|
|
*
|
|
* Configure the send and receive FIFO components with their base addresses
|
|
* and interrupt masks. Currently the base addresses are defined constants.
|
|
*
|
|
* @param InstancePtr is a pointer to the XEmac instance to be worked on.
|
|
*
|
|
* @return
|
|
*
|
|
* XST_SUCCESS if successful initialization of the packet FIFOs
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
static XStatus
|
|
ConfigureFifo(XEmac * InstancePtr)
|
|
{
|
|
XStatus Result;
|
|
|
|
/*
|
|
* Return status from the packet FIFOs initialization is ignored since
|
|
* they always return success.
|
|
*/
|
|
Result = XPacketFifoV100b_Initialize(&InstancePtr->RecvFifo,
|
|
InstancePtr->BaseAddress +
|
|
XEM_PFIFO_RXREG_OFFSET,
|
|
InstancePtr->BaseAddress +
|
|
XEM_PFIFO_RXDATA_OFFSET);
|
|
if (Result != XST_SUCCESS) {
|
|
return Result;
|
|
}
|
|
|
|
Result = XPacketFifoV100b_Initialize(&InstancePtr->SendFifo,
|
|
InstancePtr->BaseAddress +
|
|
XEM_PFIFO_TXREG_OFFSET,
|
|
InstancePtr->BaseAddress +
|
|
XEM_PFIFO_TXDATA_OFFSET);
|
|
return Result;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/**
|
|
*
|
|
* This is a stub for the scatter-gather send and recv callbacks. The stub
|
|
* is here in case the upper layers forget to set the handlers.
|
|
*
|
|
* @param CallBackRef is a pointer to the upper layer callback reference
|
|
* @param BdPtr is a pointer to the first buffer descriptor in a list
|
|
* @param NumBds is the number of descriptors in the list.
|
|
*
|
|
* @return
|
|
*
|
|
* None.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
static void
|
|
StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds)
|
|
{
|
|
XASSERT_VOID_ALWAYS();
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/**
|
|
*
|
|
* This is a stub for the non-DMA send and recv callbacks. The stub is here in
|
|
* case the upper layers forget to set the handlers.
|
|
*
|
|
* @param CallBackRef is a pointer to the upper layer callback reference
|
|
*
|
|
* @return
|
|
*
|
|
* None.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
static void
|
|
StubFifoHandler(void *CallBackRef)
|
|
{
|
|
XASSERT_VOID_ALWAYS();
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/**
|
|
*
|
|
* This is a stub for the asynchronous error callback. The stub is here in
|
|
* case the upper layers forget to set the handler.
|
|
*
|
|
* @param CallBackRef is a pointer to the upper layer callback reference
|
|
* @param ErrorCode is the Xilinx error code, indicating the cause of the error
|
|
*
|
|
* @return
|
|
*
|
|
* None.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
static void
|
|
StubErrorHandler(void *CallBackRef, XStatus ErrorCode)
|
|
{
|
|
XASSERT_VOID_ALWAYS();
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
*
|
|
* Lookup the device configuration based on the unique device ID. The table
|
|
* EmacConfigTable contains the configuration info for each device in the system.
|
|
*
|
|
* @param DeviceId is the unique device ID of the device being looked up.
|
|
*
|
|
* @return
|
|
*
|
|
* A pointer to the configuration table entry corresponding to the given
|
|
* device ID, or NULL if no match is found.
|
|
*
|
|
* @note
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
XEmac_Config *
|
|
XEmac_LookupConfig(u16 DeviceId)
|
|
{
|
|
XEmac_Config *CfgPtr = NULL;
|
|
int i;
|
|
|
|
for (i = 0; i < XPAR_XEMAC_NUM_INSTANCES; i++) {
|
|
if (XEmac_ConfigTable[i].DeviceId == DeviceId) {
|
|
CfgPtr = &XEmac_ConfigTable[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
return CfgPtr;
|
|
}
|