brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-23 03:19:43 +09:00
Code Issues Projects Releases Wiki Activity
aba3924927
u-boot-brain/board/engicam/icorem6
History
Jagan Teki cc65e354fe i.MX6: engicam: Fix MAINTAINERS/README 
- Update newly added include/configs file in MAINTAINERS
- Update newly added defconfig file in README

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-07 10:13:39 +01:00
..
icorem6.c env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00
Kconfig engicam: Generate single config file 2017-05-31 10:39:35 +02:00
MAINTAINERS i.MX6: engicam: Fix MAINTAINERS/README 2017-11-07 10:13:39 +01:00
Makefile arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support 2016-10-26 16:53:16 +02:00
README i.MX6: engicam: Fix MAINTAINERS/README 2017-11-07 10:13:39 +01:00

README 

How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------

$ make mrproper

- Configure U-Boot for Engicam i.CoreM6 Quad/Dual/Solo/DualLite:
$ make imx6qdl_icore_mmc_defconfig

- Build U-Boot
$ make

This will generate the SPL image called SPL and the u-boot-dtb.img.

- Flash the SPL image into the micro SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot-dtb.img image into the micro SD card:

sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Jumper settings:

MMC Boot: JM3 Closed

- Connect the Serial cable between the Starter Kit and the PC for the console.
(J28 is the Linux Serial console connector)

- Insert the micro SD card in the board, power it up and U-Boot messages should
come up.