mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
15d79fcac0
There have been some updates to the device tree since 5.6. This also includes some clocks, and makes it easier to keep board device tree files in sync with Linux Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
983 lines
27 KiB
Plaintext
983 lines
27 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx8mm-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
#include "imx8mm-pinfunc.h"
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
ethernet0 = &fec1;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
i2c3 = &i2c4;
|
|
mmc0 = &usdhc1;
|
|
mmc1 = &usdhc2;
|
|
mmc2 = &usdhc3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
spi0 = &ecspi1;
|
|
spi1 = &ecspi2;
|
|
spi2 = &ecspi3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
cpu_pd_wait: cpu-pd-wait {
|
|
compatible = "arm,idle-state";
|
|
arm,psci-suspend-param = <0x0010033>;
|
|
local-timer-stop;
|
|
entry-latency-us = <1000>;
|
|
exit-latency-us = <700>;
|
|
min-residency-us = <2700>;
|
|
};
|
|
};
|
|
|
|
A53_0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MM_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
nvmem-cells = <&cpu_speed_grade>;
|
|
nvmem-cell-names = "speed_grade";
|
|
cpu-idle-states = <&cpu_pd_wait>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x1>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MM_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
cpu-idle-states = <&cpu_pd_wait>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x2>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MM_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
cpu-idle-states = <&cpu_pd_wait>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x3>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MM_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
cpu-idle-states = <&cpu_pd_wait>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_L2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
a53_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp-1200000000 {
|
|
opp-hz = /bits/ 64 <1200000000>;
|
|
opp-microvolt = <850000>;
|
|
opp-supported-hw = <0xe>, <0x7>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp-1600000000 {
|
|
opp-hz = /bits/ 64 <1600000000>;
|
|
opp-microvolt = <950000>;
|
|
opp-supported-hw = <0xc>, <0x7>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp-1800000000 {
|
|
opp-hz = /bits/ 64 <1800000000>;
|
|
opp-microvolt = <1000000>;
|
|
opp-supported-hw = <0x8>, <0x3>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
};
|
|
|
|
osc_32k: clock-osc-32k {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc_32k";
|
|
};
|
|
|
|
osc_24m: clock-osc-24m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc_24m";
|
|
};
|
|
|
|
clk_ext1: clock-ext1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext1";
|
|
};
|
|
|
|
clk_ext2: clock-ext2 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext2";
|
|
};
|
|
|
|
clk_ext3: clock-ext3 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext3";
|
|
};
|
|
|
|
clk_ext4: clock-ext4 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency= <133000000>;
|
|
clock-output-names = "clk_ext4";
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <GIC_PPI 7
|
|
(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
|
|
clock-frequency = <8000000>;
|
|
arm,no-tick-in-suspend;
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&tmu>;
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu_crit0: trip1 {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert0>;
|
|
cooling-device =
|
|
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
usbphynop1: usbphynop1 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
|
|
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
|
|
clock-names = "main_clk";
|
|
};
|
|
|
|
usbphynop2: usbphynop2 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
|
|
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
|
|
clock-names = "main_clk";
|
|
};
|
|
|
|
soc@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x0 0x3e000000>;
|
|
|
|
aips1: bus@30000000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30000000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x30000000 0x30000000 0x400000>;
|
|
|
|
sai1: sai@30010000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
|
|
reg = <0x30010000 0x10000>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
|
|
<&clk IMX8MM_CLK_SAI1_ROOT>,
|
|
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2: sai@30020000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
|
|
reg = <0x30020000 0x10000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
|
|
<&clk IMX8MM_CLK_SAI2_ROOT>,
|
|
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai3: sai@30030000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
|
|
reg = <0x30030000 0x10000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
|
|
<&clk IMX8MM_CLK_SAI3_ROOT>,
|
|
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai5: sai@30050000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
|
|
reg = <0x30050000 0x10000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
|
|
<&clk IMX8MM_CLK_SAI5_ROOT>,
|
|
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai6: sai@30060000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
|
|
reg = <0x30060000 0x10000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
|
|
<&clk IMX8MM_CLK_SAI6_ROOT>,
|
|
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio1: gpio@30200000 {
|
|
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30200000 0x10000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 10 30>;
|
|
};
|
|
|
|
gpio2: gpio@30210000 {
|
|
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30210000 0x10000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 40 21>;
|
|
};
|
|
|
|
gpio3: gpio@30220000 {
|
|
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30220000 0x10000>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 61 26>;
|
|
};
|
|
|
|
gpio4: gpio@30230000 {
|
|
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30230000 0x10000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 87 32>;
|
|
};
|
|
|
|
gpio5: gpio@30240000 {
|
|
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30240000 0x10000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 119 30>;
|
|
};
|
|
|
|
tmu: tmu@30260000 {
|
|
compatible = "fsl,imx8mm-tmu";
|
|
reg = <0x30260000 0x10000>;
|
|
clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
wdog1: watchdog@30280000 {
|
|
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30280000 0x10000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog2: watchdog@30290000 {
|
|
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30290000 0x10000>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog3: watchdog@302a0000 {
|
|
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
|
|
reg = <0x302a0000 0x10000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma2: dma-controller@302c0000 {
|
|
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
|
|
reg = <0x302c0000 0x10000>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
|
|
<&clk IMX8MM_CLK_SDMA2_ROOT>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
sdma3: dma-controller@302b0000 {
|
|
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
|
|
reg = <0x302b0000 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
|
|
<&clk IMX8MM_CLK_SDMA3_ROOT>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
iomuxc: pinctrl@30330000 {
|
|
compatible = "fsl,imx8mm-iomuxc";
|
|
reg = <0x30330000 0x10000>;
|
|
};
|
|
|
|
gpr: iomuxc-gpr@30340000 {
|
|
compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
|
|
reg = <0x30340000 0x10000>;
|
|
};
|
|
|
|
ocotp: efuse@30350000 {
|
|
compatible = "fsl,imx8mm-ocotp", "syscon";
|
|
reg = <0x30350000 0x10000>;
|
|
clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
|
|
/* For nvmem subnodes */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpu_speed_grade: speed-grade@10 {
|
|
reg = <0x10 4>;
|
|
};
|
|
};
|
|
|
|
anatop: anatop@30360000 {
|
|
compatible = "fsl,imx8mm-anatop", "syscon";
|
|
reg = <0x30360000 0x10000>;
|
|
};
|
|
|
|
snvs: snvs@30370000 {
|
|
compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
|
|
reg = <0x30370000 0x10000>;
|
|
|
|
snvs_rtc: snvs-rtc-lp {
|
|
compatible = "fsl,sec-v4.0-mon-rtc-lp";
|
|
regmap = <&snvs>;
|
|
offset = <0x34>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
|
|
clock-names = "snvs-rtc";
|
|
};
|
|
|
|
snvs_pwrkey: snvs-powerkey {
|
|
compatible = "fsl,sec-v4.0-pwrkey";
|
|
regmap = <&snvs>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
|
|
clock-names = "snvs-pwrkey";
|
|
linux,keycode = <KEY_POWER>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clk: clock-controller@30380000 {
|
|
compatible = "fsl,imx8mm-ccm";
|
|
reg = <0x30380000 0x10000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
|
|
<&clk_ext3>, <&clk_ext4>;
|
|
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
|
|
"clk_ext3", "clk_ext4";
|
|
assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
|
|
<&clk IMX8MM_CLK_A53_CORE>,
|
|
<&clk IMX8MM_CLK_NOC>,
|
|
<&clk IMX8MM_CLK_AUDIO_AHB>,
|
|
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
|
|
<&clk IMX8MM_SYS_PLL3>,
|
|
<&clk IMX8MM_VIDEO_PLL1>,
|
|
<&clk IMX8MM_AUDIO_PLL1>,
|
|
<&clk IMX8MM_AUDIO_PLL2>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
|
|
<&clk IMX8MM_ARM_PLL_OUT>,
|
|
<&clk IMX8MM_SYS_PLL3_OUT>,
|
|
<&clk IMX8MM_SYS_PLL1_800M>;
|
|
assigned-clock-rates = <0>, <0>, <0>,
|
|
<400000000>,
|
|
<400000000>,
|
|
<750000000>,
|
|
<594000000>,
|
|
<393216000>,
|
|
<361267200>;
|
|
};
|
|
|
|
src: reset-controller@30390000 {
|
|
compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
|
|
reg = <0x30390000 0x10000>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
aips2: bus@30400000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30400000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x30400000 0x30400000 0x400000>;
|
|
|
|
pwm1: pwm@30660000 {
|
|
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30660000 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
|
|
<&clk IMX8MM_CLK_PWM1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@30670000 {
|
|
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30670000 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
|
|
<&clk IMX8MM_CLK_PWM2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@30680000 {
|
|
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30680000 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
|
|
<&clk IMX8MM_CLK_PWM3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm4: pwm@30690000 {
|
|
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30690000 0x10000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
|
|
<&clk IMX8MM_CLK_PWM4_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
system_counter: timer@306a0000 {
|
|
compatible = "nxp,sysctr-timer";
|
|
reg = <0x306a0000 0x20000>;
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc_24m>;
|
|
clock-names = "per";
|
|
};
|
|
};
|
|
|
|
aips3: bus@30800000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30800000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x30800000 0x30800000 0x400000>,
|
|
<0x8000000 0x8000000 0x10000000>;
|
|
|
|
ecspi1: spi@30820000 {
|
|
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30820000 0x10000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
|
|
<&clk IMX8MM_CLK_ECSPI1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: spi@30830000 {
|
|
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30830000 0x10000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
|
|
<&clk IMX8MM_CLK_ECSPI2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi3: spi@30840000 {
|
|
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30840000 0x10000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
|
|
<&clk IMX8MM_CLK_ECSPI3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@30860000 {
|
|
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
|
|
reg = <0x30860000 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
|
|
<&clk IMX8MM_CLK_UART1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@30880000 {
|
|
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
|
|
reg = <0x30880000 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
|
|
<&clk IMX8MM_CLK_UART3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@30890000 {
|
|
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
|
|
reg = <0x30890000 0x10000>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
|
|
<&clk IMX8MM_CLK_UART2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto@30900000 {
|
|
compatible = "fsl,sec-v4.0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30900000 0x40000>;
|
|
ranges = <0 0x30900000 0x40000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_AHB>,
|
|
<&clk IMX8MM_CLK_IPG_ROOT>;
|
|
clock-names = "aclk", "ipg";
|
|
|
|
sec_jr0: jr@1000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr@2000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr2: jr@3000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x3000 0x1000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@30a20000 {
|
|
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a20000 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@30a30000 {
|
|
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a30000 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@30a40000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a40000 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@30a50000 {
|
|
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a50000 0x10000>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@30a60000 {
|
|
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
|
|
reg = <0x30a60000 0x10000>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
|
|
<&clk IMX8MM_CLK_UART4_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
mu: mailbox@30aa0000 {
|
|
compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
|
|
reg = <0x30aa0000 0x10000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_MU_ROOT>;
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
usdhc1: mmc@30b40000 {
|
|
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
|
|
reg = <0x30b40000 0x10000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
|
|
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MM_CLK_USDHC1_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc2: mmc@30b50000 {
|
|
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
|
|
reg = <0x30b50000 0x10000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
|
|
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MM_CLK_USDHC2_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc3: mmc@30b60000 {
|
|
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
|
|
reg = <0x30b60000 0x10000>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
|
|
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MM_CLK_USDHC3_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
flexspi: spi@30bb0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "nxp,imx8mm-fspi";
|
|
reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
|
|
reg-names = "fspi_base", "fspi_mmap";
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
|
|
<&clk IMX8MM_CLK_QSPI_ROOT>;
|
|
clock-names = "fspi", "fspi_en";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma1: dma-controller@30bd0000 {
|
|
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
|
|
reg = <0x30bd0000 0x10000>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
|
|
<&clk IMX8MM_CLK_AHB>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
fec1: ethernet@30be0000 {
|
|
compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
|
|
reg = <0x30be0000 0x10000>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
|
|
<&clk IMX8MM_CLK_ENET1_ROOT>,
|
|
<&clk IMX8MM_CLK_ENET_TIMER>,
|
|
<&clk IMX8MM_CLK_ENET_REF>,
|
|
<&clk IMX8MM_CLK_ENET_PHY_REF>;
|
|
clock-names = "ipg", "ahb", "ptp",
|
|
"enet_clk_ref", "enet_out";
|
|
assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
|
|
<&clk IMX8MM_CLK_ENET_TIMER>,
|
|
<&clk IMX8MM_CLK_ENET_REF>,
|
|
<&clk IMX8MM_CLK_ENET_TIMER>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
|
|
<&clk IMX8MM_SYS_PLL2_100M>,
|
|
<&clk IMX8MM_SYS_PLL2_125M>;
|
|
assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
|
|
fsl,num-tx-queues = <3>;
|
|
fsl,num-rx-queues = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
};
|
|
|
|
aips4: bus@32c00000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x32c00000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x32c00000 0x32c00000 0x400000>;
|
|
|
|
usbotg1: usb@32e40000 {
|
|
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
|
|
reg = <0x32e40000 0x200>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
|
|
clock-names = "usb1_ctrl_root_clk";
|
|
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
|
|
fsl,usbphy = <&usbphynop1>;
|
|
fsl,usbmisc = <&usbmisc1 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc1: usbmisc@32e40200 {
|
|
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
|
|
#index-cells = <1>;
|
|
reg = <0x32e40200 0x200>;
|
|
};
|
|
|
|
usbotg2: usb@32e50000 {
|
|
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
|
|
reg = <0x32e50000 0x200>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
|
|
clock-names = "usb1_ctrl_root_clk";
|
|
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
|
|
fsl,usbphy = <&usbphynop2>;
|
|
fsl,usbmisc = <&usbmisc2 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc2: usbmisc@32e50200 {
|
|
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
|
|
#index-cells = <1>;
|
|
reg = <0x32e50200 0x200>;
|
|
};
|
|
|
|
};
|
|
|
|
dma_apbh: dma-controller@33000000 {
|
|
compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
|
|
reg = <0x33000000 0x2000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
|
|
#dma-cells = <1>;
|
|
dma-channels = <4>;
|
|
clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
|
|
};
|
|
|
|
gpmi: nand-controller@33002000{
|
|
compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
|
|
reg-names = "gpmi-nand", "bch";
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "bch";
|
|
clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
|
|
<&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
|
|
clock-names = "gpmi_io", "gpmi_bch_apb";
|
|
dmas = <&dma_apbh 0>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@38800000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x38800000 0x10000>, /* GIC Dist */
|
|
<0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ddrc: memory-controller@3d400000 {
|
|
compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
|
|
reg = <0x3d400000 0x400000>;
|
|
clock-names = "core", "pll", "alt", "apb";
|
|
clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
|
|
<&clk IMX8MM_DRAM_PLL>,
|
|
<&clk IMX8MM_CLK_DRAM_ALT>,
|
|
<&clk IMX8MM_CLK_DRAM_APB>;
|
|
};
|
|
|
|
ddr-pmu@3d800000 {
|
|
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
|
|
reg = <0x3d800000 0x400000>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|