mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-26 11:58:52 +09:00
![Kever Yang](/assets/img/avatar_default.png)
Move all the nodes only shown in u-boot to -u-boot.dtsi to make rk3328.dtsi clean. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
236 lines
5.0 KiB
Plaintext
236 lines
5.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3328.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip RK3328 EVB";
|
|
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
gmac_clkin: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "gmac_clkin";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
vcc3v3_sdmmc: sdmmc-pwren {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3";
|
|
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc5v0_otg: vcc5v0-otg-drv {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
regulator-name = "vcc5v0_otg";
|
|
gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
regulator-name = "vcc5v0_host_xhci";
|
|
gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc_phy: vcc-phy-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_phy";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
disable-wp;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
supports-emmc;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac2io {
|
|
phy-supply = <&vcc_phy>;
|
|
phy-mode = "rgmii";
|
|
clock_in_out = "input";
|
|
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 50000>;
|
|
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
|
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmiim1_pins>;
|
|
tx_delay = <0x26>;
|
|
rx_delay = <0x11>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb20_otg {
|
|
vbus-supply = <&vcc5v0_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-rising-time-ns = <168>;
|
|
i2c-scl-falling-time-ns = <4>;
|
|
status = "okay";
|
|
|
|
rk805: pmic@18 {
|
|
compatible = "rockchip,rk805";
|
|
status = "okay";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "xin32k", "rk805-clkout2";
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vdd_arm: DCDC_REG2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_io: DCDC_REG4 {
|
|
regulator-name = "vcc_io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vdd_18: LDO_REG1 {
|
|
regulator-name = "vdd_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_18emmc: LDO_REG2 {
|
|
regulator-name = "vcc_18emmc";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_10: LDO_REG3 {
|
|
regulator-name = "vdd_10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins =
|
|
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */
|
|
};
|
|
};
|
|
};
|
|
|