u-boot-brain/arch/powerpc/include/asm/global_data.h
Wolfgang Denk 25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00

203 lines
5.9 KiB
C

/*
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
#include "config.h"
#include "asm/types.h"
/*
* The following data structure is placed in some memory wich is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
* some locked parts of the data cache) to allow for a minimum set of
* global variables during system initialization (until we have set
* up the memory controller so that we can use RAM).
*
* Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
*/
typedef struct global_data {
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
#if defined(CONFIG_8xx)
unsigned long brg_clk;
#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
unsigned long vco_out;
unsigned long cpm_clk;
unsigned long scc_clk;
unsigned long brg_clk;
#ifdef CONFIG_PCI
unsigned long pci_clk;
#endif
#endif
unsigned long mem_clk;
#if defined(CONFIG_MPC83xx)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
#endif
#if defined (CONFIG_MPC834x)
u32 usbmph_clk;
#endif /* CONFIG_MPC834x */
#if defined(CONFIG_MPC8315)
u32 tdm_clk;
#endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
u32 pci_clk;
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
u32 sata_clk;
#endif
#if defined(CONFIG_MPC8360)
u32 mem_sec_clk;
#endif /* CONFIG_MPC8360 */
#endif
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
u32 lbc_clk;
void *cpu;
#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
u32 i2c1_clk;
u32 i2c2_clk;
#endif
#if defined(CONFIG_QE)
u32 qe_clk;
u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
#if defined(CONFIG_FSL_LAW)
u32 used_laws;
#endif
#if defined(CONFIG_E500)
u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
#endif
#if defined(CONFIG_MPC512X)
u32 ips_clk;
u32 csb_clk;
u32 pci_clk;
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC8220)
unsigned long bExtUart;
unsigned long inp_clk;
unsigned long pci_clk;
unsigned long vco_clk;
unsigned long pev_clk;
unsigned long flb_clk;
#endif
phys_size_t ram_size; /* RAM size */
unsigned long reset_status; /* reset status register at boot */
#if defined(CONFIG_MPC83xx)
unsigned long arbiter_event_attributes;
unsigned long arbiter_event_address;
#endif
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long have_console; /* serial_init() was called */
#if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
unsigned int dp_alloc_base;
unsigned int dp_alloc_top;
#endif
#if defined(CONFIG_4xx)
u32 uart_clk;
#endif /* CONFIG_4xx */
#if defined(CONFIG_SYS_GT_6426x)
unsigned int mirror_hack[16];
#endif
#if defined(CONFIG_A3000) || \
defined(CONFIG_HIDDEN_DRAGON) || \
defined(CONFIG_MUSENKI) || \
defined(CONFIG_SANDPOINT)
void * console_addr;
#endif
unsigned long relocaddr; /* Start address of U-Boot in RAM */
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
unsigned long fb_base; /* Base address of framebuffer memory */
#endif
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
unsigned long post_log_word; /* Record POST activities */
unsigned long post_init_f_time; /* When post_init_f started */
#endif
#ifdef CONFIG_BOARD_TYPES
unsigned long board_type;
#endif
#ifdef CONFIG_MODEM_SUPPORT
unsigned long do_mdm_init;
unsigned long be_quiet;
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
unsigned long kbd_status;
#endif
#if defined(CONFIG_WD_MAX_RATE)
unsigned long long wdt_last; /* trace watch-dog triggering rate */
#endif
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
} gd_t;
/*
* Global Data Flags
*/
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
#if 1
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
#else /* We could use plain global data, but the resulting code is bigger */
#define XTRN_DECLARE_GLOBAL_DATA_PTR extern
#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
gd_t *gd
#endif
#endif /* __ASM_GBL_DATA_H */