Peng Fan 439321b264 imx: add i.MX8MP EVK board ... Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>		2020-01-08 13:20:09 +01:00
..
clock_imx8mm.c	imx: imx8m: only support non-dm code in clock_imx8mm.c	2020-01-08 13:20:09 +01:00
clock_imx8mq.c	imx: imx8mq: handle ESDHC in mxc_get_clock	2020-01-08 13:18:55 +01:00
clock_slice.c	imx: imx8mp: add basic clock	2020-01-08 13:20:08 +01:00
imximage-8mm-lpddr4.cfg	imx8m: add image cfg for i.MX8MM lpddr4	2019-10-08 16:36:36 +02:00
imximage-8mn-ddr4.cfg	imx8m: add i.MX8MN ddr4 image cfg file	2019-11-05 10:27:18 +01:00
imximage-8mp-lpddr4.cfg	imx: imx8m: add imximage-8mp-lpddr4.cfg	2020-01-08 13:20:09 +01:00
imximage.cfg	imx: imx8m: introduce imximage cfg file	2019-01-01 14:12:18 +01:00
Kconfig	imx: add i.MX8MP EVK board	2020-01-08 13:20:09 +01:00
lowlevel_init.S	imx: rename mx8m,MX8M to imx8m,IMX8M	2019-01-01 14:12:18 +01:00
Makefile	imx: imx8mp: add basic clock	2020-01-08 13:20:08 +01:00
soc.c	imx8mp: set BYPASS ID SWAP to avoid AXI bus errors	2020-01-08 13:20:08 +01:00