Stefan Roese a7f480d92d arm: mx6: Add CCV xPress board support ... This patch add support for the CCV xPress board which is equipped with the i.MX6UL. And provides the following interfaces: - 128MiB DDR - UART - I2C - eMMC (with booting) - Ethernet - USB This patch adds two build targets. One with and one without SPL. The non-SPL version is used for loading U-Boot via USB (imx_usb_loader). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>		2016-03-26 14:16:12 +01:00
..
clock.c	imx: print ARM clock for clocks command	2016-03-25 13:57:19 +01:00
ddr.c	arm: imx6: Switch DDR3 calibration to wait_for_bit()	2016-03-25 14:01:29 +01:00
Kconfig	arm: mx6: Add CCV xPress board support	2016-03-26 14:16:12 +01:00
Makefile	imx: hab: rework secure boot support for imx6	2015-10-30 15:20:57 +01:00
mp.c	mx6: add support of multi-processor command	2014-08-20 11:52:54 +02:00
soc.c	imx: mx6ul configure the PMIC_STBY_REQ pin as open drain	2016-03-25 13:56:55 +01:00