Cooper Jr., Franklin a76a6f3e04 ARM: k2g: Program DDR PHY MR2 register with the default value ... K2G GP doesn't require the MR2 register to be programed since the default is good enough. However, newer K2G boards do need to change this register value. Therefore, instead of not writing this register if ran on a K2G board just program the value to be written to match the default/reset value. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2017-07-10 14:25:57 -04:00
..
cpu	arm64: use psci reset on snapdragon	2017-07-06 16:17:13 -04:00
dts	arm: dts: Add new "generic" 66AK2Gx device tree file.	2017-07-10 14:25:54 -04:00
imx-common	drivers: pci: imx: add imx_pcie_remove function	2017-05-31 10:09:03 +02:00
include	ti816x: Enable ethernet support	2017-06-28 11:43:39 -04:00
lib	Revert "armv7m: Disable D-cache when booting nommu(ARMv7M) Linux kernel"	2017-06-29 21:18:48 -04:00
mach-aspeed	aspeed: Refactor SCU to use consistent mask & shift	2017-05-08 11:57:35 -04:00
mach-at91	ARM: atmel: Rename MA5D4EVK	2017-06-29 13:30:27 -04:00
mach-bcm283x	bcm2835_wdt: support for the BCM2835/2836 watchdog	2017-05-09 20:30:08 -04:00
mach-davinci	common: arm: davinci: Move header file out of common	2017-06-05 12:31:23 -04:00
mach-exynos	Kconfig: Finish migration of hashing commands	2017-05-31 19:38:14 -04:00
mach-highbank	ARM: highbank: move SoC sources to mach-highbank	2015-02-21 08:23:51 -05:00
mach-integrator	integrator: switch to DM serial port	2015-08-12 20:47:49 -04:00
mach-keystone	ARM: k2g: Program DDR PHY MR2 register with the default value	2017-07-10 14:25:57 -04:00
mach-kirkwood	Kconfig: Add a CONFIG_IDE option	2017-05-22 12:45:27 -04:00
mach-meson	board_f: Drop setup_dram_config() wrapper	2017-04-05 16:36:51 -04:00
mach-mvebu	dm: Rename dev_addr..() functions	2017-06-01 07:03:01 -06:00
mach-omap2	ti816x: Add additional boot device detection logic	2017-06-23 10:38:03 -04:00
mach-orion5x	board_f: Drop setup_dram_config() wrapper	2017-04-05 16:36:51 -04:00
mach-rmobile	mmc: sh_sdhi: Add MMC version 5.0 support	2017-06-09 20:25:16 +09:00
mach-rockchip	rockchip: rk3288: Allow setting up clocks in U-Boot proper	2017-06-09 13:45:34 -06:00
mach-s5pc1xx	arm: s5pc1xx: move SoC to mach-s5pc1xx	2015-11-30 17:17:01 +09:00
mach-snapdragon	dm: Rename dev_addr..() functions	2017-06-01 07:03:01 -06:00
mach-socfpga	Convert CONFIG_SPL_BOARD_INIT to Kconfig	2017-05-22 07:29:48 -04:00
mach-sti	board: Add STMicroelectronics STiH410-B2260 support	2017-03-14 20:40:21 -04:00
mach-stm32	stm32: Correct positioning of declaration	2017-07-06 16:17:17 -04:00
mach-sunxi	sunxi: add LPDDR3 timing from stock boot0	2017-06-08 22:37:55 +05:30
mach-tegra	ARM: tegra: remove Whistler support	2017-06-12 13:03:50 -07:00
mach-uniphier	ARM: uniphier: fix various sparse warnings	2017-06-25 06:06:09 +09:00
mach-versatile	arm: Remove versatileab board	2015-09-11 15:01:25 -04:00
mach-zynq	arm: zynq: Add Kconfig option for any DDR specific initialization	2017-06-20 16:41:44 +02:00
thumb1/include/asm/proc-armv	arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD	2015-11-10 15:03:48 +01:00
config.mk	arm: Always keep the dtb section on objcopy	2017-06-05 14:13:11 -04:00
Kconfig	ARM: make memset and memcpy prompt message more clearly	2017-06-29 09:51:06 -04:00
Kconfig.debug	arm: debug: add Kconfig entries for lowlevel debug	2014-10-26 22:23:12 +01:00
Makefile	ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig	2017-04-27 16:49:08 -04:00