Ian Campbell a6e50a88d8 ahci: provide sunxi SATA driver using AHCI platform framework ... This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done for sun7i only since I don't have access to any other sunxi platforms with sata included. The PHY setup is derived from the Alwinner releases and Linux, but is mostly undocumented. The Allwinner AHCI controller also requires some magic (and, again, undocumented) DMA initialisation when starting a port. This is added under a suitable ifdef. This option is enabled for Cubieboard, Cubieboard2 and Cubietruck based on contents of Linux DTS files, including SATA power pin config taken from the DTS. All build tested, but runtime tested on Cubieboard2 and Cubietruck only. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>		2014-07-31 15:37:22 +02:00
..
board.c	sunxi: Fix reset hang on sun5i	2014-07-18 19:42:22 +01:00
clock_sun4i.c	ahci: provide sunxi SATA driver using AHCI platform framework	2014-07-31 15:37:22 +02:00
clock.c	sunxi: add sun7i clocks and timer support.	2014-05-25 16:12:12 +02:00
config.mk	sunxi: non-FEL SPL boot support for sun7i	2014-05-25 16:31:03 +02:00
cpu_info.c	sunxi: Add sun5i support	2014-07-06 20:12:44 +01:00
dram.c	sunxi: Add sun5i support	2014-07-06 20:12:44 +01:00
Makefile	sunxi: Add sun5i support	2014-07-06 20:12:44 +01:00
pinmux.c	sunxi: add sun7i pinmux and gpio support	2014-05-25 16:12:21 +02:00
start.c	sunxi: add sun7i cpu, board and start of day support	2014-05-25 16:12:40 +02:00
timer.c	sunxi: add sun7i clocks and timer support.	2014-05-25 16:12:12 +02:00
u-boot-spl-fel.lds	sunxi: Add i2c support	2014-07-18 19:41:30 +01:00
u-boot-spl.lds	sunxi: Add i2c support	2014-07-18 19:41:30 +01:00