mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![Bin Meng](/assets/img/avatar_default.png)
This is architecture-dependent early initialization hence should be put in the platform Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
912 lines
30 KiB
Plaintext
912 lines
30 KiB
Plaintext
menu "Boot timing"
|
|
|
|
config BOOTSTAGE
|
|
bool "Boot timing and reporting"
|
|
help
|
|
Enable recording of boot time while booting. To use it, insert
|
|
calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
|
|
bootstage.h. Only a single entry is recorded for each ID. You can
|
|
give the entry a name with bootstage_mark_name(). You can also
|
|
record elapsed time in a particular stage using bootstage_start()
|
|
before starting and bootstage_accum() when finished. Bootstage will
|
|
add up all the accumulated time and report it.
|
|
|
|
Normally, IDs are defined in bootstage.h but a small number of
|
|
additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
|
|
as the ID.
|
|
|
|
Calls to show_boot_progress() will also result in log entries but
|
|
these will not have names.
|
|
|
|
config SPL_BOOTSTAGE
|
|
bool "Boot timing and reported in SPL"
|
|
depends on BOOTSTAGE
|
|
help
|
|
Enable recording of boot time in SPL. To make this visible to U-Boot
|
|
proper, enable BOOTSTAGE_STASH as well. This will stash the timing
|
|
information when SPL finishes and load it when U-Boot proper starts
|
|
up.
|
|
|
|
config BOOTSTAGE_REPORT
|
|
bool "Display a detailed boot timing report before booting the OS"
|
|
depends on BOOTSTAGE
|
|
help
|
|
Enable output of a boot time report just before the OS is booted.
|
|
This shows how long it took U-Boot to go through each stage of the
|
|
boot process. The report looks something like this:
|
|
|
|
Timer summary in microseconds:
|
|
Mark Elapsed Stage
|
|
0 0 reset
|
|
3,575,678 3,575,678 board_init_f start
|
|
3,575,695 17 arch_cpu_init A9
|
|
3,575,777 82 arch_cpu_init done
|
|
3,659,598 83,821 board_init_r start
|
|
3,910,375 250,777 main_loop
|
|
29,916,167 26,005,792 bootm_start
|
|
30,361,327 445,160 start_kernel
|
|
|
|
config BOOTSTAGE_USER_COUNT
|
|
int "Number of boot ID numbers available for user use"
|
|
default 20
|
|
help
|
|
This is the number of available user bootstage records.
|
|
Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
|
|
a new ID will be allocated from this stash. If you exceed
|
|
the limit, recording will stop.
|
|
|
|
config BOOTSTAGE_RECORD_COUNT
|
|
int "Number of boot stage records to store"
|
|
default 30
|
|
help
|
|
This is the size of the bootstage record list and is the maximum
|
|
number of bootstage records that can be recorded.
|
|
|
|
config BOOTSTAGE_FDT
|
|
bool "Store boot timing information in the OS device tree"
|
|
depends on BOOTSTAGE
|
|
help
|
|
Stash the bootstage information in the FDT. A root 'bootstage'
|
|
node is created with each bootstage id as a child. Each child
|
|
has a 'name' property and either 'mark' containing the
|
|
mark time in microseconds, or 'accum' containing the
|
|
accumulated time for that bootstage id in microseconds.
|
|
For example:
|
|
|
|
bootstage {
|
|
154 {
|
|
name = "board_init_f";
|
|
mark = <3575678>;
|
|
};
|
|
170 {
|
|
name = "lcd";
|
|
accum = <33482>;
|
|
};
|
|
};
|
|
|
|
Code in the Linux kernel can find this in /proc/devicetree.
|
|
|
|
config BOOTSTAGE_STASH
|
|
bool "Stash the boot timing information in memory before booting OS"
|
|
depends on BOOTSTAGE
|
|
help
|
|
Some OSes do not support device tree. Bootstage can instead write
|
|
the boot timing information in a binary format at a given address.
|
|
This happens through a call to bootstage_stash(), typically in
|
|
the CPU's cleanup_before_linux() function. You can use the
|
|
'bootstage stash' and 'bootstage unstash' commands to do this on
|
|
the command line.
|
|
|
|
config BOOTSTAGE_STASH_ADDR
|
|
hex "Address to stash boot timing information"
|
|
default 0
|
|
help
|
|
Provide an address which will not be overwritten by the OS when it
|
|
starts, so that it can read this information when ready.
|
|
|
|
config BOOTSTAGE_STASH_SIZE
|
|
hex "Size of boot timing stash region"
|
|
default 0x1000
|
|
help
|
|
This should be large enough to hold the bootstage stash. A value of
|
|
4096 (4KiB) is normally plenty.
|
|
|
|
endmenu
|
|
|
|
menu "Boot media"
|
|
|
|
config NOR_BOOT
|
|
bool "Support for booting from NOR flash"
|
|
depends on NOR
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via NOR. In this case we will enable certain pinmux early
|
|
as the ROM only partially sets up pinmux. We also default to using
|
|
NOR for environment.
|
|
|
|
config NAND_BOOT
|
|
bool "Support for booting from NAND flash"
|
|
default n
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via NAND flash. This is not a must, some SoCs need this,
|
|
some not.
|
|
|
|
config ONENAND_BOOT
|
|
bool "Support for booting from ONENAND"
|
|
default n
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via ONENAND. This is not a must, some SoCs need this,
|
|
some not.
|
|
|
|
config QSPI_BOOT
|
|
bool "Support for booting from QSPI flash"
|
|
default n
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via QSPI flash. This is not a must, some SoCs need this,
|
|
some not.
|
|
|
|
config SATA_BOOT
|
|
bool "Support for booting from SATA"
|
|
default n
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via SATA. This is not a must, some SoCs need this,
|
|
some not.
|
|
|
|
config SD_BOOT
|
|
bool "Support for booting from SD/EMMC"
|
|
default n
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via SD/EMMC. This is not a must, some SoCs need this,
|
|
some not.
|
|
|
|
config SPI_BOOT
|
|
bool "Support for booting from SPI flash"
|
|
default n
|
|
help
|
|
Enabling this will make a U-Boot binary that is capable of being
|
|
booted via SPI flash. This is not a must, some SoCs need this,
|
|
some not.
|
|
|
|
endmenu
|
|
|
|
menu "Environment"
|
|
|
|
config ENV_IS_IN_DATAFLASH
|
|
bool "Environment in dataflash"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have a DataFlash memory device which you
|
|
want to use for the environment.
|
|
|
|
- CONFIG_ENV_OFFSET:
|
|
- CONFIG_ENV_ADDR:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These three #defines specify the offset and size of the
|
|
environment area within the total memory of your DataFlash placed
|
|
at the specified address.
|
|
|
|
config ENV_IS_IN_EEPROM
|
|
bool "Environment in EEPROM"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Use this if you have an EEPROM or similar serial access
|
|
device and a driver for it.
|
|
|
|
- CONFIG_ENV_OFFSET:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These two #defines specify the offset and size of the
|
|
environment area within the total memory of your EEPROM.
|
|
|
|
- CONFIG_SYS_I2C_EEPROM_ADDR:
|
|
If defined, specified the chip address of the EEPROM device.
|
|
The default address is zero.
|
|
|
|
- CONFIG_SYS_I2C_EEPROM_BUS:
|
|
If defined, specified the i2c bus of the EEPROM device.
|
|
|
|
- CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
|
|
If defined, the number of bits used to address bytes in a
|
|
single page in the EEPROM device. A 64 byte page, for example
|
|
would require six bits.
|
|
|
|
- CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
|
|
If defined, the number of milliseconds to delay between
|
|
page writes. The default is zero milliseconds.
|
|
|
|
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
|
|
The length in bytes of the EEPROM memory array address. Note
|
|
that this is NOT the chip address length!
|
|
|
|
- CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
|
|
EEPROM chips that implement "address overflow" are ones
|
|
like Catalyst 24WC04/08/16 which has 9/10/11 bits of
|
|
address and the extra bits end up in the "chip address" bit
|
|
slots. This makes a 24WC08 (1Kbyte) chip look like four 256
|
|
byte chips.
|
|
|
|
Note that we consider the length of the address field to
|
|
still be one byte because the extra address bits are hidden
|
|
in the chip address.
|
|
|
|
- CONFIG_SYS_EEPROM_SIZE:
|
|
The size in bytes of the EEPROM device.
|
|
|
|
- CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
define this, if you have I2C and SPI activated, and your
|
|
EEPROM, which holds the environment, is on the I2C bus.
|
|
|
|
- CONFIG_I2C_ENV_EEPROM_BUS
|
|
if you have an Environment on an EEPROM reached over
|
|
I2C muxes, you can define here, how to reach this
|
|
EEPROM. For example:
|
|
|
|
#define CONFIG_I2C_ENV_EEPROM_BUS 1
|
|
|
|
EEPROM which holds the environment, is reached over
|
|
a pca9547 i2c mux with address 0x70, channel 3.
|
|
|
|
config ENV_IS_IN_FAT
|
|
bool "Environment is in a FAT filesystem"
|
|
depends on !CHAIN_OF_TRUST
|
|
select FAT_WRITE
|
|
help
|
|
Define this if you want to use the FAT file system for the environment.
|
|
|
|
|
|
- CONFIG_FAT_WRITE:
|
|
This must be enabled. Otherwise it cannot save the environment file.
|
|
|
|
config ENV_IS_IN_FLASH
|
|
bool "Environment in flash memory"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have a flash device which you want to use for the
|
|
environment.
|
|
|
|
a) The environment occupies one whole flash sector, which is
|
|
"embedded" in the text segment with the U-Boot code. This
|
|
happens usually with "bottom boot sector" or "top boot
|
|
sector" type flash chips, which have several smaller
|
|
sectors at the start or the end. For instance, such a
|
|
layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
|
|
such a case you would place the environment in one of the
|
|
4 kB sectors - with U-Boot code before and after it. With
|
|
"top boot sector" type flash chips, you would put the
|
|
environment in one of the last sectors, leaving a gap
|
|
between U-Boot and the environment.
|
|
|
|
CONFIG_ENV_OFFSET:
|
|
|
|
Offset of environment data (variable area) to the
|
|
beginning of flash memory; for instance, with bottom boot
|
|
type flash chips the second sector can be used: the offset
|
|
for this sector is given here.
|
|
|
|
CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
|
|
|
|
CONFIG_ENV_ADDR:
|
|
|
|
This is just another way to specify the start address of
|
|
the flash sector containing the environment (instead of
|
|
CONFIG_ENV_OFFSET).
|
|
|
|
CONFIG_ENV_SECT_SIZE:
|
|
|
|
Size of the sector containing the environment.
|
|
|
|
|
|
b) Sometimes flash chips have few, equal sized, BIG sectors.
|
|
In such a case you don't want to spend a whole sector for
|
|
the environment.
|
|
|
|
CONFIG_ENV_SIZE:
|
|
|
|
If you use this in combination with CONFIG_ENV_IS_IN_FLASH
|
|
and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
|
|
of this flash sector for the environment. This saves
|
|
memory for the RAM copy of the environment.
|
|
|
|
It may also save flash memory if you decide to use this
|
|
when your environment is "embedded" within U-Boot code,
|
|
since then the remainder of the flash sector could be used
|
|
for U-Boot code. It should be pointed out that this is
|
|
STRONGLY DISCOURAGED from a robustness point of view:
|
|
updating the environment in flash makes it always
|
|
necessary to erase the WHOLE sector. If something goes
|
|
wrong before the contents has been restored from a copy in
|
|
RAM, your target system will be dead.
|
|
|
|
CONFIG_ENV_ADDR_REDUND
|
|
CONFIG_ENV_SIZE_REDUND
|
|
|
|
These settings describe a second storage area used to hold
|
|
a redundant copy of the environment data, so that there is
|
|
a valid backup copy in case there is a power failure during
|
|
a "saveenv" operation.
|
|
|
|
BE CAREFUL! Any changes to the flash layout, and some changes to the
|
|
source code will make it necessary to adapt <board>/u-boot.lds*
|
|
accordingly!
|
|
|
|
config ENV_IS_IN_MMC
|
|
bool "Environment in an MMC device"
|
|
depends on !CHAIN_OF_TRUST
|
|
default y if ARCH_SUNXI
|
|
help
|
|
Define this if you have an MMC device which you want to use for the
|
|
environment.
|
|
|
|
CONFIG_SYS_MMC_ENV_DEV:
|
|
|
|
Specifies which MMC device the environment is stored in.
|
|
|
|
CONFIG_SYS_MMC_ENV_PART (optional):
|
|
|
|
Specifies which MMC partition the environment is stored in. If not
|
|
set, defaults to partition 0, the user area. Common values might be
|
|
1 (first MMC boot partition), 2 (second MMC boot partition).
|
|
|
|
CONFIG_ENV_OFFSET:
|
|
CONFIG_ENV_SIZE:
|
|
|
|
These two #defines specify the offset and size of the environment
|
|
area within the specified MMC device.
|
|
|
|
If offset is positive (the usual case), it is treated as relative to
|
|
the start of the MMC partition. If offset is negative, it is treated
|
|
as relative to the end of the MMC partition. This can be useful if
|
|
your board may be fitted with different MMC devices, which have
|
|
different sizes for the MMC partitions, and you always want the
|
|
environment placed at the very end of the partition, to leave the
|
|
maximum possible space before it, to store other data.
|
|
|
|
These two values are in units of bytes, but must be aligned to an
|
|
MMC sector boundary.
|
|
|
|
CONFIG_ENV_OFFSET_REDUND (optional):
|
|
|
|
Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
|
|
hold a redundant copy of the environment data. This provides a
|
|
valid backup copy in case the other copy is corrupted, e.g. due
|
|
to a power failure during a "saveenv" operation.
|
|
|
|
This value may also be positive or negative; this is handled in the
|
|
same way as CONFIG_ENV_OFFSET.
|
|
|
|
This value is also in units of bytes, but must also be aligned to
|
|
an MMC sector boundary.
|
|
|
|
CONFIG_ENV_SIZE_REDUND (optional):
|
|
|
|
This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
|
|
set. If this value is set, it must be set to the same value as
|
|
CONFIG_ENV_SIZE.
|
|
|
|
config ENV_IS_IN_NAND
|
|
bool "Environment in a NAND device"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have a NAND device which you want to use for the
|
|
environment.
|
|
|
|
- CONFIG_ENV_OFFSET:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These two #defines specify the offset and size of the environment
|
|
area within the first NAND device. CONFIG_ENV_OFFSET must be
|
|
aligned to an erase block boundary.
|
|
|
|
- CONFIG_ENV_OFFSET_REDUND (optional):
|
|
|
|
This setting describes a second storage area of CONFIG_ENV_SIZE
|
|
size used to hold a redundant copy of the environment data, so
|
|
that there is a valid backup copy in case there is a power failure
|
|
during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
|
|
aligned to an erase block boundary.
|
|
|
|
- CONFIG_ENV_RANGE (optional):
|
|
|
|
Specifies the length of the region in which the environment
|
|
can be written. This should be a multiple of the NAND device's
|
|
block size. Specifying a range with more erase blocks than
|
|
are needed to hold CONFIG_ENV_SIZE allows bad blocks within
|
|
the range to be avoided.
|
|
|
|
- CONFIG_ENV_OFFSET_OOB (optional):
|
|
|
|
Enables support for dynamically retrieving the offset of the
|
|
environment from block zero's out-of-band data. The
|
|
"nand env.oob" command can be used to record this offset.
|
|
Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
|
|
using CONFIG_ENV_OFFSET_OOB.
|
|
|
|
config ENV_IS_IN_NVRAM
|
|
bool "Environment in a non-volatile RAM"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have some non-volatile memory device
|
|
(NVRAM, battery buffered SRAM) which you want to use for the
|
|
environment.
|
|
|
|
- CONFIG_ENV_ADDR:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These two #defines are used to determine the memory area you
|
|
want to use for environment. It is assumed that this memory
|
|
can just be read and written to, without any special
|
|
provision.
|
|
|
|
config ENV_IS_IN_ONENAND
|
|
bool "Environment is in OneNAND"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you want to put your local device's environment in
|
|
OneNAND.
|
|
|
|
- CONFIG_ENV_ADDR:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These two #defines are used to determine the device range you
|
|
want to use for environment. It is assumed that this memory
|
|
can just be read and written to, without any special
|
|
provision.
|
|
|
|
config ENV_IS_IN_REMOTE
|
|
bool "Environment is in remove memory space"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have a remote memory space which you
|
|
want to use for the local device's environment.
|
|
|
|
- CONFIG_ENV_ADDR:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These two #defines specify the address and size of the
|
|
environment area within the remote memory space. The
|
|
local device can get the environment from remote memory
|
|
space by SRIO or PCIE links.
|
|
|
|
config ENV_IS_IN_SPI_FLASH
|
|
bool "Environment is in SPI flash"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have a SPI Flash memory device which you
|
|
want to use for the environment.
|
|
|
|
- CONFIG_ENV_OFFSET:
|
|
- CONFIG_ENV_SIZE:
|
|
|
|
These two #defines specify the offset and size of the
|
|
environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
|
|
aligned to an erase sector boundary.
|
|
|
|
- CONFIG_ENV_SECT_SIZE:
|
|
|
|
Define the SPI flash's sector size.
|
|
|
|
- CONFIG_ENV_OFFSET_REDUND (optional):
|
|
|
|
This setting describes a second storage area of CONFIG_ENV_SIZE
|
|
size used to hold a redundant copy of the environment data, so
|
|
that there is a valid backup copy in case there is a power failure
|
|
during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
|
|
aligned to an erase sector boundary.
|
|
|
|
- CONFIG_ENV_SPI_BUS (optional):
|
|
- CONFIG_ENV_SPI_CS (optional):
|
|
|
|
Define the SPI bus and chip select. If not defined they will be 0.
|
|
|
|
- CONFIG_ENV_SPI_MAX_HZ (optional):
|
|
|
|
Define the SPI max work clock. If not defined then use 1MHz.
|
|
|
|
- CONFIG_ENV_SPI_MODE (optional):
|
|
|
|
Define the SPI work mode. If not defined then use SPI_MODE_3.
|
|
|
|
config ENV_IS_IN_UBI
|
|
bool "Environment in a UBI volume"
|
|
depends on !CHAIN_OF_TRUST
|
|
help
|
|
Define this if you have an UBI volume that you want to use for the
|
|
environment. This has the benefit of wear-leveling the environment
|
|
accesses, which is important on NAND.
|
|
|
|
- CONFIG_ENV_UBI_PART:
|
|
|
|
Define this to a string that is the mtd partition containing the UBI.
|
|
|
|
- CONFIG_ENV_UBI_VOLUME:
|
|
|
|
Define this to the name of the volume that you want to store the
|
|
environment in.
|
|
|
|
- CONFIG_ENV_UBI_VOLUME_REDUND:
|
|
|
|
Define this to the name of another volume to store a second copy of
|
|
the environment in. This will enable redundant environments in UBI.
|
|
It is assumed that both volumes are in the same MTD partition.
|
|
|
|
- CONFIG_UBI_SILENCE_MSG
|
|
- CONFIG_UBIFS_SILENCE_MSG
|
|
|
|
You will probably want to define these to avoid a really noisy system
|
|
when storing the env in UBI.
|
|
|
|
config ENV_IS_NOWHERE
|
|
bool "Environment is not stored"
|
|
help
|
|
Define this if you don't want to or can't have an environment stored
|
|
on a storage medium
|
|
|
|
config ENV_FAT_INTERFACE
|
|
string "Name of the block device for the environment"
|
|
depends on ENV_IS_IN_FAT
|
|
default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91
|
|
help
|
|
Define this to a string that is the name of the block device.
|
|
|
|
config ENV_FAT_DEVICE_AND_PART
|
|
string "Device and partition for where to store the environemt in FAT"
|
|
depends on ENV_IS_IN_FAT
|
|
default "0:1" if TI_COMMON_CMD_OPTIONS
|
|
default "0:auto" if ARCH_ZYNQMP
|
|
default "0" if ARCH_AT91
|
|
help
|
|
Define this to a string to specify the partition of the device. It can
|
|
be as following:
|
|
|
|
"D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
|
|
- "D:P": device D partition P. Error occurs if device D has no
|
|
partition table.
|
|
- "D:0": device D.
|
|
- "D" or "D:": device D partition 1 if device D has partition
|
|
table, or the whole device D if has no partition
|
|
table.
|
|
- "D:auto": first partition in device D with bootable flag set.
|
|
If none, first valid partition in device D. If no
|
|
partition table then means device D.
|
|
|
|
config ENV_FAT_FILE
|
|
string "Name of the FAT file to use for the environemnt"
|
|
depends on ENV_IS_IN_FAT
|
|
default "uboot.env"
|
|
help
|
|
It's a string of the FAT file name. This file use to store the
|
|
environment.
|
|
|
|
if ARCH_SUNXI
|
|
|
|
config ENV_OFFSET
|
|
hex "Environment Offset"
|
|
depends on !ENV_IS_IN_UBI
|
|
depends on !ENV_IS_NOWHERE
|
|
default 0x88000 if ARCH_SUNXI
|
|
help
|
|
Offset from the start of the device (or partition)
|
|
|
|
config ENV_SIZE
|
|
hex "Environment Size"
|
|
depends on !ENV_IS_NOWHERE
|
|
default 0x20000 if ARCH_SUNXI
|
|
help
|
|
Size of the environment storage area
|
|
|
|
config ENV_UBI_PART
|
|
string "UBI partition name"
|
|
depends on ENV_IS_IN_UBI
|
|
help
|
|
MTD partition containing the UBI device
|
|
|
|
config ENV_UBI_VOLUME
|
|
string "UBI volume name"
|
|
depends on ENV_IS_IN_UBI
|
|
help
|
|
Name of the volume that you want to store the environment in.
|
|
|
|
endif
|
|
|
|
endmenu
|
|
|
|
config BOOTDELAY
|
|
int "delay in seconds before automatically booting"
|
|
default 2
|
|
depends on AUTOBOOT
|
|
help
|
|
Delay before automatically running bootcmd;
|
|
set to 0 to autoboot with no delay, but you can stop it by key input.
|
|
set to -1 to disable autoboot.
|
|
set to -2 to autoboot with no delay and not check for abort
|
|
|
|
See doc/README.autoboot for details.
|
|
|
|
menu "Console"
|
|
|
|
config MENU
|
|
bool
|
|
help
|
|
This is the library functionality to provide a text-based menu of
|
|
choices for the user to make choices with.
|
|
|
|
config CONSOLE_RECORD
|
|
bool "Console recording"
|
|
help
|
|
This provides a way to record console output (and provide console
|
|
input) through circular buffers. This is mostly useful for testing.
|
|
Console output is recorded even when the console is silent.
|
|
To enable console recording, call console_record_reset_enable()
|
|
from your code.
|
|
|
|
config CONSOLE_RECORD_OUT_SIZE
|
|
hex "Output buffer size"
|
|
depends on CONSOLE_RECORD
|
|
default 0x400 if CONSOLE_RECORD
|
|
help
|
|
Set the size of the console output buffer. When this fills up, no
|
|
more data will be recorded until some is removed. The buffer is
|
|
allocated immediately after the malloc() region is ready.
|
|
|
|
config CONSOLE_RECORD_IN_SIZE
|
|
hex "Input buffer size"
|
|
depends on CONSOLE_RECORD
|
|
default 0x100 if CONSOLE_RECORD
|
|
help
|
|
Set the size of the console input buffer. When this contains data,
|
|
tstc() and getc() will use this in preference to real device input.
|
|
The buffer is allocated immediately after the malloc() region is
|
|
ready.
|
|
|
|
config IDENT_STRING
|
|
string "Board specific string to be added to uboot version string"
|
|
help
|
|
This options adds the board specific name to u-boot version.
|
|
|
|
config SILENT_CONSOLE
|
|
bool "Support a silent console"
|
|
help
|
|
This option allows the console to be silenced, meaning that no
|
|
output will appear on the console devices. This is controlled by
|
|
setting the environment vaariable 'silent' to a non-empty value.
|
|
Note this also silences the console when booting Linux.
|
|
|
|
When the console is set up, the variable is checked, and the
|
|
GD_FLG_SILENT flag is set. Changing the environment variable later
|
|
will update the flag.
|
|
|
|
config SILENT_U_BOOT_ONLY
|
|
bool "Only silence the U-Boot console"
|
|
depends on SILENT_CONSOLE
|
|
help
|
|
Normally when the U-Boot console is silenced, Linux's console is
|
|
also silenced (assuming the board boots into Linux). This option
|
|
allows the linux console to operate normally, even if U-Boot's
|
|
is silenced.
|
|
|
|
config SILENT_CONSOLE_UPDATE_ON_SET
|
|
bool "Changes to the 'silent' environment variable update immediately"
|
|
depends on SILENT_CONSOLE
|
|
default y if SILENT_CONSOLE
|
|
help
|
|
When the 'silent' environment variable is changed, update the
|
|
console silence flag immediately. This allows 'setenv' to be used
|
|
to silence or un-silence the console.
|
|
|
|
The effect is that any change to the variable will affect the
|
|
GD_FLG_SILENT flag.
|
|
|
|
config SILENT_CONSOLE_UPDATE_ON_RELOC
|
|
bool "Allow flags to take effect on relocation"
|
|
depends on SILENT_CONSOLE
|
|
help
|
|
In some cases the environment is not available until relocation
|
|
(e.g. NAND). This option makes the value of the 'silent'
|
|
environment variable take effect at relocation.
|
|
|
|
config PRE_CONSOLE_BUFFER
|
|
bool "Buffer characters before the console is available"
|
|
help
|
|
Prior to the console being initialised (i.e. serial UART
|
|
initialised etc) all console output is silently discarded.
|
|
Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
|
|
buffer any console messages prior to the console being
|
|
initialised to a buffer. The buffer is a circular buffer, so
|
|
if it overflows, earlier output is discarded.
|
|
|
|
Note that this is not currently supported in SPL. It would be
|
|
useful to be able to share the pre-console buffer with SPL.
|
|
|
|
config PRE_CON_BUF_SZ
|
|
int "Sets the size of the pre-console buffer"
|
|
depends on PRE_CONSOLE_BUFFER
|
|
default 4096
|
|
help
|
|
The size of the pre-console buffer affects how much console output
|
|
can be held before it overflows and starts discarding earlier
|
|
output. Normally there is very little output at this early stage,
|
|
unless debugging is enabled, so allow enough for ~10 lines of
|
|
text.
|
|
|
|
This is a useful feature if you are using a video console and
|
|
want to see the full boot output on the console. Without this
|
|
option only the post-relocation output will be displayed.
|
|
|
|
config PRE_CON_BUF_ADDR
|
|
hex "Address of the pre-console buffer"
|
|
depends on PRE_CONSOLE_BUFFER
|
|
default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
|
|
default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
|
|
help
|
|
This sets the start address of the pre-console buffer. This must
|
|
be in available memory and is accessed before relocation and
|
|
possibly before DRAM is set up. Therefore choose an address
|
|
carefully.
|
|
|
|
We should consider removing this option and allocating the memory
|
|
in board_init_f_init_reserve() instead.
|
|
|
|
config CONSOLE_MUX
|
|
bool "Enable console multiplexing"
|
|
default y if DM_VIDEO || VIDEO || LCD
|
|
help
|
|
This allows multiple devices to be used for each console 'file'.
|
|
For example, stdout can be set to go to serial and video.
|
|
Similarly, stdin can be set to come from serial and keyboard.
|
|
Input can be provided from either source. Console multiplexing
|
|
adds a small amount of size to U-Boot. Changes to the environment
|
|
variables stdout, stdin and stderr will take effect immediately.
|
|
|
|
config SYS_CONSOLE_IS_IN_ENV
|
|
bool "Select console devices from the environment"
|
|
default y if CONSOLE_MUX
|
|
help
|
|
This allows multiple input/output devices to be set at boot time.
|
|
For example, if stdout is set to "serial,video" then output will
|
|
be sent to both the serial and video devices on boot. The
|
|
environment variables can be updated after boot to change the
|
|
input/output devices.
|
|
|
|
config SYS_CONSOLE_OVERWRITE_ROUTINE
|
|
bool "Allow board control over console overwriting"
|
|
help
|
|
If this is enabled, and the board-specific function
|
|
overwrite_console() returns 1, the stdin, stderr and stdout are
|
|
switched to the serial port, else the settings in the environment
|
|
are used. If this is not enabled, the console will not be switched
|
|
to serial.
|
|
|
|
config SYS_CONSOLE_ENV_OVERWRITE
|
|
bool "Update environment variables during console init"
|
|
help
|
|
The console environment variables (stdout, stdin, stderr) can be
|
|
used to determine the correct console devices on start-up. This
|
|
option writes the console devices to these variables on console
|
|
start-up (after relocation). This causes the environment to be
|
|
updated to match the console devices actually chosen.
|
|
|
|
config SYS_CONSOLE_INFO_QUIET
|
|
bool "Don't display the console devices on boot"
|
|
help
|
|
Normally U-Boot displays the current settings for stdout, stdin
|
|
and stderr on boot when the post-relocation console is set up.
|
|
Enable this option to supress this output. It can be obtained by
|
|
calling stdio_print_current_devices() from board code.
|
|
|
|
config SYS_STDIO_DEREGISTER
|
|
bool "Allow deregistering stdio devices"
|
|
default y if USB_KEYBOARD
|
|
help
|
|
Generally there is no need to deregister stdio devices since they
|
|
are never deactivated. But if a stdio device is used which can be
|
|
removed (for example a USB keyboard) then this option can be
|
|
enabled to ensure this is handled correctly.
|
|
|
|
endmenu
|
|
|
|
config DTB_RESELECT
|
|
bool "Support swapping dtbs at a later point in boot"
|
|
depends on FIT_EMBED
|
|
help
|
|
It is possible during initial boot you may need to use a generic
|
|
dtb until you can fully determine the board your running on. This
|
|
config allows boards to implement a function at a later point
|
|
during boot to switch to the "correct" dtb.
|
|
|
|
config FIT_EMBED
|
|
bool "Support a FIT image embedded in the U-boot image"
|
|
help
|
|
This option provides hooks to allow U-boot to parse an
|
|
appended FIT image and enable board specific code to then select
|
|
the correct DTB to be used.
|
|
|
|
config DEFAULT_FDT_FILE
|
|
string "Default fdt file"
|
|
help
|
|
This option is used to set the default fdt file to boot OS.
|
|
|
|
config VERSION_VARIABLE
|
|
bool "add U-Boot environment variable vers"
|
|
default n
|
|
help
|
|
If this variable is defined, an environment variable
|
|
named "ver" is created by U-Boot showing the U-Boot
|
|
version as printed by the "version" command.
|
|
Any change to this variable will be reverted at the
|
|
next reset.
|
|
|
|
config BOARD_LATE_INIT
|
|
bool
|
|
help
|
|
Sometimes board require some initialization code that might
|
|
require once the actual init done, example saving board specific env,
|
|
boot-modes etc. which eventually done at late.
|
|
|
|
So this config enable the late init code with the help of board_late_init
|
|
function which should defined on respective boards.
|
|
|
|
config DISPLAY_CPUINFO
|
|
bool "Display information about the CPU during start up"
|
|
default y if ARM || NIOS2 || X86 || XTENSA
|
|
help
|
|
Display information about the CPU that U-Boot is running on
|
|
when U-Boot starts up. The function print_cpuinfo() is called
|
|
to do this.
|
|
|
|
config DISPLAY_BOARDINFO
|
|
bool "Display information about the board during start up"
|
|
default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
|
|
help
|
|
Display information about the board that U-Boot is running on
|
|
when U-Boot starts up. The board function checkboard() is called
|
|
to do this.
|
|
|
|
menu "Start-up hooks"
|
|
|
|
config ARCH_EARLY_INIT_R
|
|
bool "Call arch-specific init soon after relocation"
|
|
help
|
|
With this option U-Boot will call arch_early_init_r() soon after
|
|
relocation. Driver model is running by this point, and the cache
|
|
is on. Note that board_early_init_r() is called first, if
|
|
enabled. This can be used to set up architecture-specific devices.
|
|
|
|
config ARCH_MISC_INIT
|
|
bool "Call arch-specific init after relocation, when console is ready"
|
|
help
|
|
With this option U-Boot will call arch_misc_init() after
|
|
relocation to allow miscellaneous arch-dependent initialisation
|
|
to be performed. This function should be defined by the board
|
|
and will be called after the console is set up, after relocaiton.
|
|
|
|
config BOARD_EARLY_INIT_F
|
|
bool "Call board-specific init before relocation"
|
|
help
|
|
Some boards need to perform initialisation as soon as possible
|
|
after boot. With this option, U-Boot calls board_early_init_f()
|
|
after driver model is ready in the pre-relocation init sequence.
|
|
Note that the normal serial console is not yet set up, but the
|
|
debug UART will be available if enabled.
|
|
|
|
endmenu
|
|
|
|
menu "Security support"
|
|
|
|
config HASH
|
|
bool # "Support hashing API (SHA1, SHA256, etc.)"
|
|
help
|
|
This provides a way to hash data in memory using various supported
|
|
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
|
|
and the algorithms it supports are defined in common/hash.c. See
|
|
also CMD_HASH for command-line access.
|
|
|
|
endmenu
|
|
|
|
source "common/spl/Kconfig"
|