mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 09:58:52 +09:00
![Wadim Egorov](/assets/img/avatar_default.png)
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC. The module can be connected to different carrier boards. It can be also equipped with different RAM, SPI flash and eMMC variants. The Rapid Development Kit option is using the following setup: - 1 GB DDR3 RAM (2 Banks) - 1x 4 KB EEPROM - DP83867 Gigabit Ethernet PHY - 16 MB SPI Flash - 4 GB eMMC Flash Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination with the phyCORE-RK3288 System on Module. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
329 lines
6.7 KiB
C
329 lines
6.7 KiB
C
/*
|
|
* (C) Copyright 2015 Google, Inc
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <led.h>
|
|
#include <malloc.h>
|
|
#include <ram.h>
|
|
#include <spl.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bootrom.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/periph.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <asm/arch/timer.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <dm/root.h>
|
|
#include <dm/test.h>
|
|
#include <dm/util.h>
|
|
#include <power/regulator.h>
|
|
#include <power/rk8xx_pmic.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
const void *blob = gd->fdt_blob;
|
|
struct udevice *dev;
|
|
const char *bootdev;
|
|
int node;
|
|
int ret;
|
|
|
|
bootdev = fdtdec_get_config_string(blob, "u-boot,boot0");
|
|
debug("Boot device %s\n", bootdev);
|
|
if (!bootdev)
|
|
goto fallback;
|
|
|
|
node = fdt_path_offset(blob, bootdev);
|
|
if (node < 0) {
|
|
debug("node=%d\n", node);
|
|
goto fallback;
|
|
}
|
|
ret = device_get_global_by_of_offset(node, &dev);
|
|
if (ret) {
|
|
debug("device at node %s/%d not found: %d\n", bootdev, node,
|
|
ret);
|
|
goto fallback;
|
|
}
|
|
debug("Found device %s\n", dev->name);
|
|
switch (device_get_uclass_id(dev)) {
|
|
case UCLASS_SPI_FLASH:
|
|
return BOOT_DEVICE_SPI;
|
|
case UCLASS_MMC:
|
|
return BOOT_DEVICE_MMC1;
|
|
default:
|
|
debug("Booting from device uclass '%s' not supported\n",
|
|
dev_get_uclass_name(dev));
|
|
}
|
|
|
|
fallback:
|
|
#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
|
|
defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
|
|
defined(CONFIG_TARGET_CHROMEBOOK_MINNIE)
|
|
return BOOT_DEVICE_SPI;
|
|
#endif
|
|
return BOOT_DEVICE_MMC1;
|
|
}
|
|
|
|
u32 spl_boot_mode(const u32 boot_device)
|
|
{
|
|
return MMCSD_MODE_RAW;
|
|
}
|
|
|
|
/* read L2 control register (L2CTLR) */
|
|
static inline uint32_t read_l2ctlr(void)
|
|
{
|
|
uint32_t val = 0;
|
|
|
|
asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
|
|
|
|
return val;
|
|
}
|
|
|
|
/* write L2 control register (L2CTLR) */
|
|
static inline void write_l2ctlr(uint32_t val)
|
|
{
|
|
/*
|
|
* Note: L2CTLR can only be written when the L2 memory system
|
|
* is idle, ie before the MMU is enabled.
|
|
*/
|
|
asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory");
|
|
isb();
|
|
}
|
|
|
|
static void configure_l2ctlr(void)
|
|
{
|
|
uint32_t l2ctlr;
|
|
|
|
l2ctlr = read_l2ctlr();
|
|
l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */
|
|
|
|
/*
|
|
* Data RAM write latency: 2 cycles
|
|
* Data RAM read latency: 2 cycles
|
|
* Data RAM setup latency: 1 cycle
|
|
* Tag RAM write latency: 1 cycle
|
|
* Tag RAM read latency: 1 cycle
|
|
* Tag RAM setup latency: 1 cycle
|
|
*/
|
|
l2ctlr |= (1 << 3 | 1 << 0);
|
|
write_l2ctlr(l2ctlr);
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_MMC_SUPPORT
|
|
static int configure_emmc(struct udevice *pinctrl)
|
|
{
|
|
#if defined(CONFIG_TARGET_CHROMEBOOK_JERRY)
|
|
|
|
struct gpio_desc desc;
|
|
int ret;
|
|
|
|
pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC);
|
|
|
|
/*
|
|
* TODO(sjg@chromium.org): Pick this up from device tree or perhaps
|
|
* use the EMMC_PWREN setting.
|
|
*/
|
|
ret = dm_gpio_lookup_name("D9", &desc);
|
|
if (ret) {
|
|
debug("gpio ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_gpio_request(&desc, "emmc_pwren");
|
|
if (ret) {
|
|
debug("gpio_request ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT);
|
|
if (ret) {
|
|
debug("gpio dir ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_gpio_set_value(&desc, 1);
|
|
if (ret) {
|
|
debug("gpio value ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPL_OF_PLATDATA)
|
|
static int phycore_init(void)
|
|
{
|
|
struct udevice *pmic;
|
|
int ret;
|
|
|
|
ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if defined(CONFIG_SPL_POWER_SUPPORT)
|
|
/* Increase USB input current to 2A */
|
|
ret = rk818_spl_configure_usb_input_current(pmic, 2000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Close charger when USB lower then 3.26V */
|
|
ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct udevice *pinctrl;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
/* Example code showing how to enable the debug UART on RK3288 */
|
|
#include <asm/arch/grf_rk3288.h>
|
|
/* Enable early UART on the RK3288 */
|
|
#define GRF_BASE 0xff770000
|
|
struct rk3288_grf * const grf = (void *)GRF_BASE;
|
|
|
|
rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
|
|
GPIO7C6_MASK << GPIO7C6_SHIFT,
|
|
GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
|
|
GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
|
|
/*
|
|
* Debug UART can be used from here if required:
|
|
*
|
|
* debug_uart_init();
|
|
* printch('a');
|
|
* printhex8(0x1234);
|
|
* printascii("string");
|
|
*/
|
|
debug_uart_init();
|
|
debug("\nspl:debug uart enabled in %s\n", __func__);
|
|
ret = spl_early_init();
|
|
if (ret) {
|
|
debug("spl_early_init() failed: %d\n", ret);
|
|
hang();
|
|
}
|
|
|
|
rockchip_timer_init();
|
|
configure_l2ctlr();
|
|
|
|
ret = rockchip_get_clk(&dev);
|
|
if (ret) {
|
|
debug("CLK init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
|
|
if (ret) {
|
|
debug("Pinctrl init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPL_OF_PLATDATA)
|
|
if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
|
|
ret = phycore_init();
|
|
if (ret) {
|
|
debug("Failed to set up phycore power settings: %d\n",
|
|
ret);
|
|
return;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
debug("\nspl:init dram\n");
|
|
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
|
|
if (ret) {
|
|
debug("DRAM init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
|
|
back_to_bootrom();
|
|
#endif
|
|
}
|
|
|
|
static int setup_led(void)
|
|
{
|
|
#ifdef CONFIG_SPL_LED
|
|
struct udevice *dev;
|
|
char *led_name;
|
|
int ret;
|
|
|
|
led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led");
|
|
if (!led_name)
|
|
return 0;
|
|
ret = led_get_by_label(led_name, &dev);
|
|
if (ret) {
|
|
debug("%s: get=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
ret = led_set_on(dev, 1);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spl_board_init(void)
|
|
{
|
|
struct udevice *pinctrl;
|
|
int ret;
|
|
|
|
ret = setup_led();
|
|
|
|
if (ret) {
|
|
debug("LED ret=%d\n", ret);
|
|
hang();
|
|
}
|
|
|
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
|
|
if (ret) {
|
|
debug("%s: Cannot find pinctrl device\n", __func__);
|
|
goto err;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_MMC_SUPPORT
|
|
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
|
|
if (ret) {
|
|
debug("%s: Failed to set up SD card\n", __func__);
|
|
goto err;
|
|
}
|
|
ret = configure_emmc(pinctrl);
|
|
if (ret) {
|
|
debug("%s: Failed to set up eMMC\n", __func__);
|
|
goto err;
|
|
}
|
|
#endif
|
|
|
|
/* Enable debug UART */
|
|
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
|
|
if (ret) {
|
|
debug("%s: Failed to set up console UART\n", __func__);
|
|
goto err;
|
|
}
|
|
|
|
preloader_console_init();
|
|
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
|
|
back_to_bootrom();
|
|
#endif
|
|
return;
|
|
err:
|
|
printf("spl_board_init: Error %d\n", ret);
|
|
|
|
/* No way to report error here */
|
|
hang();
|
|
}
|