mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 21:38:52 +09:00
![Marek Vasut](/assets/img/avatar_default.png)
Replace the current rather convoluted code using ad-hoc polling mechanism with a more straightforward code. Use wait_for_bit_le32() to poll the DDRCALSTAT register instead of local reimplementation. It makes no sense to pull for 5 seconds before giving up and trying to restart the EMIF, so instead wait 500 mSec for the calibration to complete and if this fails, restart the EMIF and try again. Perform this 32 times instead of 3 times as the original code did. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
708 lines
20 KiB
C
708 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2017 Intel Corporation <www.intel.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <malloc.h>
|
|
#include <wait_bit.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/fpga_manager.h>
|
|
#include <asm/arch/misc.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <linux/kernel.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void sdram_mmr_init(void);
|
|
static u64 sdram_size_calc(void);
|
|
|
|
/* FAWBANK - Number of Bank of a given device involved in the FAW period. */
|
|
#define ARRIA10_SDR_ACTIVATE_FAWBANK (0x1)
|
|
|
|
#define ARRIA_DDR_CONFIG(A, B, C, R) \
|
|
(((A) << 24) | ((B) << 16) | ((C) << 8) | (R))
|
|
#define DDR_CONFIG_ELEMENTS ARRAY_SIZE(ddr_config)
|
|
#define DDR_REG_SEQ2CORE 0xFFD0507C
|
|
#define DDR_REG_CORE2SEQ 0xFFD05078
|
|
#define DDR_READ_LATENCY_DELAY 40
|
|
#define DDR_SIZE_2GB_HEX 0x80000000
|
|
|
|
#define IO48_MMR_DRAMSTS 0xFFCFA0EC
|
|
#define IO48_MMR_NIOS2_RESERVE0 0xFFCFA110
|
|
#define IO48_MMR_NIOS2_RESERVE1 0xFFCFA114
|
|
#define IO48_MMR_NIOS2_RESERVE2 0xFFCFA118
|
|
|
|
#define SEQ2CORE_MASK 0xF
|
|
#define CORE2SEQ_INT_REQ 0xF
|
|
#define SEQ2CORE_INT_RESP_BIT 3
|
|
|
|
static const struct socfpga_ecc_hmc *socfpga_ecc_hmc_base =
|
|
(void *)SOCFPGA_SDR_ADDRESS;
|
|
static const struct socfpga_noc_ddr_scheduler *socfpga_noc_ddr_scheduler_base =
|
|
(void *)SOCFPGA_SDR_SCHEDULER_ADDRESS;
|
|
static const struct socfpga_noc_fw_ddr_mpu_fpga2sdram
|
|
*socfpga_noc_fw_ddr_mpu_fpga2sdram_base =
|
|
(void *)SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS;
|
|
static const struct socfpga_noc_fw_ddr_l3 *socfpga_noc_fw_ddr_l3_base =
|
|
(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
|
|
static const struct socfpga_io48_mmr *socfpga_io48_mmr_base =
|
|
(void *)SOCFPGA_HMC_MMR_IO48_ADDRESS;
|
|
|
|
/* The following are the supported configurations */
|
|
static u32 ddr_config[] = {
|
|
/* Chip - Row - Bank - Column Style */
|
|
/* All Types */
|
|
ARRIA_DDR_CONFIG(0, 3, 10, 12),
|
|
ARRIA_DDR_CONFIG(0, 3, 10, 13),
|
|
ARRIA_DDR_CONFIG(0, 3, 10, 14),
|
|
ARRIA_DDR_CONFIG(0, 3, 10, 15),
|
|
ARRIA_DDR_CONFIG(0, 3, 10, 16),
|
|
ARRIA_DDR_CONFIG(0, 3, 10, 17),
|
|
/* LPDDR x16 */
|
|
ARRIA_DDR_CONFIG(0, 3, 11, 14),
|
|
ARRIA_DDR_CONFIG(0, 3, 11, 15),
|
|
ARRIA_DDR_CONFIG(0, 3, 11, 16),
|
|
ARRIA_DDR_CONFIG(0, 3, 12, 15),
|
|
/* DDR4 Only */
|
|
ARRIA_DDR_CONFIG(0, 4, 10, 14),
|
|
ARRIA_DDR_CONFIG(0, 4, 10, 15),
|
|
ARRIA_DDR_CONFIG(0, 4, 10, 16),
|
|
ARRIA_DDR_CONFIG(0, 4, 10, 17), /* 14 */
|
|
/* Chip - Bank - Row - Column Style */
|
|
ARRIA_DDR_CONFIG(1, 3, 10, 12),
|
|
ARRIA_DDR_CONFIG(1, 3, 10, 13),
|
|
ARRIA_DDR_CONFIG(1, 3, 10, 14),
|
|
ARRIA_DDR_CONFIG(1, 3, 10, 15),
|
|
ARRIA_DDR_CONFIG(1, 3, 10, 16),
|
|
ARRIA_DDR_CONFIG(1, 3, 10, 17),
|
|
ARRIA_DDR_CONFIG(1, 3, 11, 14),
|
|
ARRIA_DDR_CONFIG(1, 3, 11, 15),
|
|
ARRIA_DDR_CONFIG(1, 3, 11, 16),
|
|
ARRIA_DDR_CONFIG(1, 3, 12, 15),
|
|
/* DDR4 Only */
|
|
ARRIA_DDR_CONFIG(1, 4, 10, 14),
|
|
ARRIA_DDR_CONFIG(1, 4, 10, 15),
|
|
ARRIA_DDR_CONFIG(1, 4, 10, 16),
|
|
ARRIA_DDR_CONFIG(1, 4, 10, 17),
|
|
};
|
|
|
|
static int match_ddr_conf(u32 ddr_conf)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < DDR_CONFIG_ELEMENTS; i++) {
|
|
if (ddr_conf == ddr_config[i])
|
|
return i;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int emif_clear(void)
|
|
{
|
|
writel(0, DDR_REG_CORE2SEQ);
|
|
|
|
return wait_for_bit_le32((u32 *)DDR_REG_SEQ2CORE,
|
|
SEQ2CORE_MASK, 0, 1000, 0);
|
|
}
|
|
|
|
static int emif_reset(void)
|
|
{
|
|
u32 c2s, s2c;
|
|
int ret;
|
|
|
|
c2s = readl(DDR_REG_CORE2SEQ);
|
|
s2c = readl(DDR_REG_SEQ2CORE);
|
|
|
|
debug("c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n",
|
|
c2s, s2c, readl(IO48_MMR_NIOS2_RESERVE0),
|
|
readl(IO48_MMR_NIOS2_RESERVE1),
|
|
readl(IO48_MMR_NIOS2_RESERVE2),
|
|
readl(IO48_MMR_DRAMSTS));
|
|
|
|
if (s2c & SEQ2CORE_MASK) {
|
|
ret = emif_clear();
|
|
if (ret) {
|
|
debug("failed emif_clear()\n");
|
|
return -EPERM;
|
|
}
|
|
}
|
|
|
|
writel(CORE2SEQ_INT_REQ, DDR_REG_CORE2SEQ);
|
|
|
|
ret = wait_for_bit_le32((u32 *)DDR_REG_SEQ2CORE,
|
|
SEQ2CORE_INT_RESP_BIT, false, 1000, false);
|
|
if (ret) {
|
|
debug("emif_reset failed to see interrupt acknowledge\n");
|
|
emif_clear();
|
|
return ret;
|
|
}
|
|
|
|
mdelay(1);
|
|
|
|
ret = emif_clear();
|
|
if (ret) {
|
|
debug("emif_clear() failed\n");
|
|
return -EPERM;
|
|
}
|
|
debug("emif_reset interrupt cleared\n");
|
|
|
|
debug("nr0=%08x nr1=%08x nr2=%08x\n",
|
|
readl(IO48_MMR_NIOS2_RESERVE0),
|
|
readl(IO48_MMR_NIOS2_RESERVE1),
|
|
readl(IO48_MMR_NIOS2_RESERVE2));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ddr_setup(void)
|
|
{
|
|
int i, ret;
|
|
|
|
/* Try 32 times to do a calibration */
|
|
for (i = 0; i < 32; i++) {
|
|
mdelay(500);
|
|
ret = wait_for_bit_le32(&socfpga_ecc_hmc_base->ddrcalstat,
|
|
BIT(0), true, 500, false);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
ret = emif_reset();
|
|
if (ret)
|
|
puts("Error: Failed to reset EMIF\n");
|
|
}
|
|
|
|
puts("Error: Could Not Calibrate SDRAM\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
static int sdram_is_ecc_enabled(void)
|
|
{
|
|
return !!(readl(&socfpga_ecc_hmc_base->eccctrl) &
|
|
ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK);
|
|
}
|
|
|
|
/* Initialize SDRAM ECC bits to avoid false DBE */
|
|
static void sdram_init_ecc_bits(u32 size)
|
|
{
|
|
icache_enable();
|
|
|
|
memset(0, 0, 0x8000);
|
|
gd->arch.tlb_addr = 0x4000;
|
|
gd->arch.tlb_size = PGTABLE_SIZE;
|
|
|
|
dcache_enable();
|
|
|
|
printf("DDRCAL: Scrubbing ECC RAM (%i MiB).\n", size >> 20);
|
|
memset((void *)0x8000, 0, size - 0x8000);
|
|
flush_dcache_all();
|
|
printf("DDRCAL: Scrubbing ECC RAM done.\n");
|
|
dcache_disable();
|
|
}
|
|
|
|
/* Function to startup the SDRAM*/
|
|
static int sdram_startup(void)
|
|
{
|
|
/* Release NOC ddr scheduler from reset */
|
|
socfpga_reset_deassert_noc_ddr_scheduler();
|
|
|
|
/* Bringup the DDR (calibration and configuration) */
|
|
return ddr_setup();
|
|
}
|
|
|
|
static u64 sdram_size_calc(void)
|
|
{
|
|
u32 dramaddrw = readl(&socfpga_io48_mmr_base->dramaddrw);
|
|
|
|
u64 size = BIT(((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_SHIFT) +
|
|
((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT) +
|
|
((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT) +
|
|
((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT) +
|
|
(dramaddrw & IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK));
|
|
|
|
size *= (2 << (readl(&socfpga_ecc_hmc_base->ddrioctrl) &
|
|
ALT_ECC_HMC_OCP_DDRIOCTRL_IO_SIZE_MSK));
|
|
|
|
debug("SDRAM size=%llu\n", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
/* Function to initialize SDRAM MMR and NOC DDR scheduler*/
|
|
static void sdram_mmr_init(void)
|
|
{
|
|
u32 update_value, io48_value;
|
|
u32 ctrlcfg0 = readl(&socfpga_io48_mmr_base->ctrlcfg0);
|
|
u32 ctrlcfg1 = readl(&socfpga_io48_mmr_base->ctrlcfg1);
|
|
u32 dramaddrw = readl(&socfpga_io48_mmr_base->dramaddrw);
|
|
u32 caltim0 = readl(&socfpga_io48_mmr_base->caltiming0);
|
|
u32 caltim1 = readl(&socfpga_io48_mmr_base->caltiming1);
|
|
u32 caltim2 = readl(&socfpga_io48_mmr_base->caltiming2);
|
|
u32 caltim3 = readl(&socfpga_io48_mmr_base->caltiming3);
|
|
u32 caltim4 = readl(&socfpga_io48_mmr_base->caltiming4);
|
|
u32 caltim9 = readl(&socfpga_io48_mmr_base->caltiming9);
|
|
u32 ddrioctl;
|
|
|
|
/*
|
|
* Configure the DDR IO size [0xFFCFB008]
|
|
* niosreserve0: Used to indicate DDR width &
|
|
* bit[7:0] = Number of data bits (0x20 for 32bit)
|
|
* bit[8] = 1 if user-mode OCT is present
|
|
* bit[9] = 1 if warm reset compiled into EMIF Cal Code
|
|
* bit[10] = 1 if warm reset is on during generation in EMIF Cal
|
|
* niosreserve1: IP ADCDS version encoded as 16 bit value
|
|
* bit[2:0] = Variant (0=not special,1=FAE beta, 2=Customer beta,
|
|
* 3=EAP, 4-6 are reserved)
|
|
* bit[5:3] = Service Pack # (e.g. 1)
|
|
* bit[9:6] = Minor Release #
|
|
* bit[14:10] = Major Release #
|
|
*/
|
|
if ((readl(&socfpga_io48_mmr_base->niosreserve1) >> 6) & 0x1FF) {
|
|
update_value = readl(&socfpga_io48_mmr_base->niosreserve0);
|
|
writel(((update_value & 0xFF) >> 5),
|
|
&socfpga_ecc_hmc_base->ddrioctrl);
|
|
}
|
|
|
|
ddrioctl = readl(&socfpga_ecc_hmc_base->ddrioctrl);
|
|
|
|
/* Set the DDR Configuration [0xFFD12400] */
|
|
io48_value = ARRIA_DDR_CONFIG(
|
|
((ctrlcfg1 &
|
|
IO48_MMR_CTRLCFG1_ADDR_ORDER_MASK) >>
|
|
IO48_MMR_CTRLCFG1_ADDR_ORDER_SHIFT),
|
|
((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT) +
|
|
((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT),
|
|
(dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK),
|
|
((dramaddrw &
|
|
IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK) >>
|
|
IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT));
|
|
|
|
update_value = match_ddr_conf(io48_value);
|
|
if (update_value)
|
|
writel(update_value,
|
|
&socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_ddrconf);
|
|
|
|
/*
|
|
* Configure DDR timing [0xFFD1240C]
|
|
* RDTOMISS = tRTP + tRP + tRCD - BL/2
|
|
* WRTOMISS = WL + tWR + tRP + tRCD and
|
|
* WL = RL + BL/2 + 2 - rd-to-wr ; tWR = 15ns so...
|
|
* First part of equation is in memory clock units so divide by 2
|
|
* for HMC clock units. 1066MHz is close to 1ns so use 15 directly.
|
|
* WRTOMISS = ((RL + BL/2 + 2 + tWR) >> 1)- rd-to-wr + tRP + tRCD
|
|
*/
|
|
u32 ctrlcfg0_cfg_ctrl_burst_len =
|
|
(ctrlcfg0 & IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_MASK) >>
|
|
IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_SHIFT;
|
|
|
|
u32 caltim0_cfg_act_to_rdwr = caltim0 &
|
|
IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_MASK;
|
|
|
|
u32 caltim0_cfg_act_to_act =
|
|
(caltim0 & IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_MASK) >>
|
|
IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_SHIFT;
|
|
|
|
u32 caltim0_cfg_act_to_act_db =
|
|
(caltim0 &
|
|
IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_MASK) >>
|
|
IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_SHIFT;
|
|
|
|
u32 caltim1_cfg_rd_to_wr =
|
|
(caltim1 & IO48_MMR_CALTIMING1_CFG_RD_TO_WR_MASK) >>
|
|
IO48_MMR_CALTIMING1_CFG_RD_TO_WR_SHIFT;
|
|
|
|
u32 caltim1_cfg_rd_to_rd_dc =
|
|
(caltim1 & IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_MASK) >>
|
|
IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_SHIFT;
|
|
|
|
u32 caltim1_cfg_rd_to_wr_dc =
|
|
(caltim1 & IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_MASK) >>
|
|
IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_SHIFT;
|
|
|
|
u32 caltim2_cfg_rd_to_pch =
|
|
(caltim2 & IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_MASK) >>
|
|
IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_SHIFT;
|
|
|
|
u32 caltim3_cfg_wr_to_rd =
|
|
(caltim3 & IO48_MMR_CALTIMING3_CFG_WR_TO_RD_MASK) >>
|
|
IO48_MMR_CALTIMING3_CFG_WR_TO_RD_SHIFT;
|
|
|
|
u32 caltim3_cfg_wr_to_rd_dc =
|
|
(caltim3 & IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_MASK) >>
|
|
IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_SHIFT;
|
|
|
|
u32 caltim4_cfg_pch_to_valid =
|
|
(caltim4 & IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_MASK) >>
|
|
IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_SHIFT;
|
|
|
|
u32 caltim9_cfg_4_act_to_act = caltim9 &
|
|
IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_MASK;
|
|
|
|
update_value = (caltim2_cfg_rd_to_pch + caltim4_cfg_pch_to_valid +
|
|
caltim0_cfg_act_to_rdwr -
|
|
(ctrlcfg0_cfg_ctrl_burst_len >> 2));
|
|
|
|
io48_value = ((((readl(&socfpga_io48_mmr_base->dramtiming0) &
|
|
ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK) + 2 + 15 +
|
|
(ctrlcfg0_cfg_ctrl_burst_len >> 1)) >> 1) -
|
|
/* Up to here was in memory cycles so divide by 2 */
|
|
caltim1_cfg_rd_to_wr + caltim0_cfg_act_to_rdwr +
|
|
caltim4_cfg_pch_to_valid);
|
|
|
|
writel(((caltim0_cfg_act_to_act <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_ACTTOACT_LSB) |
|
|
(update_value <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOMISS_LSB) |
|
|
(io48_value <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTOMISS_LSB) |
|
|
((ctrlcfg0_cfg_ctrl_burst_len >> 2) <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BURSTLEN_LSB) |
|
|
(caltim1_cfg_rd_to_wr <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOWR_LSB) |
|
|
(caltim3_cfg_wr_to_rd <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTORD_LSB) |
|
|
(((ddrioctl == 1) ? 1 : 0) <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BWRATIO_LSB)),
|
|
&socfpga_noc_ddr_scheduler_base->
|
|
ddr_t_main_scheduler_ddrtiming);
|
|
|
|
/* Configure DDR mode [0xFFD12410] [precharge = 0] */
|
|
writel(((ddrioctl ? 0 : 1) <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_BWRATIOEXTENDED_LSB),
|
|
&socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_ddrmode);
|
|
|
|
/* Configure the read latency [0xFFD12414] */
|
|
writel(((readl(&socfpga_io48_mmr_base->dramtiming0) &
|
|
ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK) >> 1) +
|
|
DDR_READ_LATENCY_DELAY,
|
|
&socfpga_noc_ddr_scheduler_base->
|
|
ddr_t_main_scheduler_readlatency);
|
|
|
|
/*
|
|
* Configuring timing values concerning activate commands
|
|
* [0xFFD12438] [FAWBANK alway 1 because always 4 bank DDR]
|
|
*/
|
|
writel(((caltim0_cfg_act_to_act_db <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_RRD_LSB) |
|
|
(caltim9_cfg_4_act_to_act <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAW_LSB) |
|
|
(ARRIA10_SDR_ACTIVATE_FAWBANK <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAWBANK_LSB)),
|
|
&socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_activate);
|
|
|
|
/*
|
|
* Configuring timing values concerning device to device data bus
|
|
* ownership change [0xFFD1243C]
|
|
*/
|
|
writel(((caltim1_cfg_rd_to_rd_dc <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTORD_LSB) |
|
|
(caltim1_cfg_rd_to_wr_dc <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTOWR_LSB) |
|
|
(caltim3_cfg_wr_to_rd_dc <<
|
|
ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSWRTORD_LSB)),
|
|
&socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_devtodev);
|
|
|
|
/* Enable or disable the SDRAM ECC */
|
|
if (ctrlcfg1 & IO48_MMR_CTRLCFG1_CTRL_ENABLE_ECC) {
|
|
setbits_le32(&socfpga_ecc_hmc_base->eccctrl,
|
|
(ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK));
|
|
clrbits_le32(&socfpga_ecc_hmc_base->eccctrl,
|
|
(ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK));
|
|
setbits_le32(&socfpga_ecc_hmc_base->eccctrl2,
|
|
(ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK));
|
|
} else {
|
|
clrbits_le32(&socfpga_ecc_hmc_base->eccctrl,
|
|
(ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK));
|
|
clrbits_le32(&socfpga_ecc_hmc_base->eccctrl2,
|
|
(ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK |
|
|
ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK));
|
|
}
|
|
}
|
|
|
|
struct firewall_entry {
|
|
const char *prop_name;
|
|
const u32 cfg_addr;
|
|
const u32 en_addr;
|
|
const u32 en_bit;
|
|
};
|
|
#define FW_MPU_FPGA_ADDRESS \
|
|
((const struct socfpga_noc_fw_ddr_mpu_fpga2sdram *)\
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS)
|
|
|
|
#define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(ADDR) \
|
|
(SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS + \
|
|
offsetof(struct socfpga_noc_fw_ddr_mpu_fpga2sdram, ADDR))
|
|
|
|
#define SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(ADDR) \
|
|
(SOCFPGA_SDR_FIREWALL_L3_ADDRESS + \
|
|
offsetof(struct socfpga_noc_fw_ddr_l3, ADDR))
|
|
|
|
const struct firewall_entry firewall_table[] = {
|
|
{
|
|
"mpu0",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion0addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK
|
|
},
|
|
{
|
|
"mpu1",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS +
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion1addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK
|
|
},
|
|
{
|
|
"mpu2",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion2addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_MPUREG2EN_SET_MSK
|
|
},
|
|
{
|
|
"mpu3",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion3addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_MPUREG3EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-0",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion0addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG0EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-1",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion1addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG1EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-2",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion2addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG2EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-3",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion3addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG3EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-4",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion4addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG4EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-5",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion5addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG5EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-6",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion6addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG6EN_SET_MSK
|
|
},
|
|
{
|
|
"l3-7",
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion7addr),
|
|
SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_HPSREG7EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram0-0",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram0region0addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG0EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram0-1",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram0region1addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG1EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram0-2",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram0region2addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG2EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram0-3",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram0region3addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG3EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram1-0",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram1region0addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG0EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram1-1",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram1region1addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG1EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram1-2",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram1region2addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG2EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram1-3",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram1region3addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG3EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram2-0",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram2region0addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG0EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram2-1",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram2region1addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG1EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram2-2",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram2region2addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG2EN_SET_MSK
|
|
},
|
|
{
|
|
"fpga2sdram2-3",
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET
|
|
(fpga2sdram2region3addr),
|
|
SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable),
|
|
ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG3EN_SET_MSK
|
|
},
|
|
|
|
};
|
|
|
|
static int of_sdram_firewall_setup(const void *blob)
|
|
{
|
|
int child, i, node, ret;
|
|
u32 start_end[2];
|
|
char name[32];
|
|
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_ALTERA_SOCFPGA_NOC);
|
|
if (node < 0)
|
|
return -ENXIO;
|
|
|
|
child = fdt_first_subnode(blob, node);
|
|
if (child < 0)
|
|
return -ENXIO;
|
|
|
|
/* set to default state */
|
|
writel(0, &socfpga_noc_fw_ddr_mpu_fpga2sdram_base->enable);
|
|
writel(0, &socfpga_noc_fw_ddr_l3_base->enable);
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(firewall_table); i++) {
|
|
sprintf(name, "%s", firewall_table[i].prop_name);
|
|
ret = fdtdec_get_int_array(blob, child, name,
|
|
start_end, 2);
|
|
if (ret) {
|
|
sprintf(name, "altr,%s", firewall_table[i].prop_name);
|
|
ret = fdtdec_get_int_array(blob, child, name,
|
|
start_end, 2);
|
|
if (ret)
|
|
continue;
|
|
}
|
|
|
|
writel((start_end[0] & ALT_NOC_FW_DDR_ADDR_MASK) |
|
|
(start_end[1] << ALT_NOC_FW_DDR_END_ADDR_LSB),
|
|
firewall_table[i].cfg_addr);
|
|
setbits_le32(firewall_table[i].en_addr,
|
|
firewall_table[i].en_bit);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ddr_calibration_sequence(void)
|
|
{
|
|
WATCHDOG_RESET();
|
|
|
|
/* Check to see if SDRAM cal was success */
|
|
if (sdram_startup()) {
|
|
puts("DDRCAL: Failed\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
puts("DDRCAL: Success\n");
|
|
|
|
WATCHDOG_RESET();
|
|
|
|
/* initialize the MMR register */
|
|
sdram_mmr_init();
|
|
|
|
/* assigning the SDRAM size */
|
|
u64 size = sdram_size_calc();
|
|
|
|
/*
|
|
* If size is less than zero, this is invalid/weird value from
|
|
* calculation, use default Config size.
|
|
* Up to 2GB is supported, 2GB would be used if more than that.
|
|
*/
|
|
if (size <= 0)
|
|
gd->ram_size = PHYS_SDRAM_1_SIZE;
|
|
else if (DDR_SIZE_2GB_HEX <= size)
|
|
gd->ram_size = DDR_SIZE_2GB_HEX;
|
|
else
|
|
gd->ram_size = (u32)size;
|
|
|
|
/* setup the dram info within bd */
|
|
dram_init_banksize();
|
|
|
|
if (of_sdram_firewall_setup(gd->fdt_blob))
|
|
puts("FW: Error Configuring Firewall\n");
|
|
|
|
if (sdram_is_ecc_enabled())
|
|
sdram_init_ecc_bits(gd->ram_size);
|
|
|
|
return 0;
|
|
}
|