Dirk Eibach a3f9d6c779 mpc83xx: Add strider board ... The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini <trini@konsulko.com>		2015-11-12 18:03:48 -05:00
..
hrcon.c	fdt: Allow ft_board_setup() to report failure	2014-11-21 04:43:15 +01:00
Kconfig	mpc83xx: Add strider board	2015-11-12 18:03:48 -05:00
MAINTAINERS	mpc83xx: Add strider board	2015-11-12 18:03:48 -05:00
Makefile	mpc83xx: Add strider board	2015-11-12 18:03:48 -05:00
mpc8308.c	mpc83xx: Add gdsys hrcon board	2014-11-19 08:48:42 +01:00
mpc8308.h	mpc83xx: Add gdsys hrcon board	2014-11-19 08:48:42 +01:00
sdram.c	mpc83xx: Add gdsys hrcon board	2014-11-19 08:48:42 +01:00
strider.c	mpc83xx: Add strider board	2015-11-12 18:03:48 -05:00