Stefan Roese a3ed9789e7 arm: mvebu: sdram: Enable ECC support on Armada XP ... This is tested on the DB-MV784MP-GP eval board. To really enable ECC support on this board the I2C EEPROM needs to get changed. As it saves the enabling of ECC support internally. For this the following commands can be used to enable ECC support on this board: Its recommended for first save (print) the value(s) in this EEPROM address: => i2c md 4e 0.1 2 0000: 05 00 .. To enable ECC support you need to set bit 1 in the 2nd byte: Marvell>> i2c mw 4e 1.1 02 Marvell>> i2c md 4e 0.1 2 0000: 05 02 .. To disable ECC support again, please use this command: Marvell>> i2c mw 4e 1.1 00 Marvell>> i2c md 4e 0.1 2 0000: 05 00 .. On other AXP boards, simply plugging an ECC DIMM should be enough to enable ECC support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>		2015-08-17 18:41:33 +02:00
..
altera	ddr: altera: sequencer: Clean checkpatch issues	2015-08-08 14:14:30 +02:00
fsl	drivers/ddr/fsl: Adjust bstopre value	2015-08-03 12:06:38 -07:00
marvell	arm: mvebu: sdram: Enable ECC support on Armada XP	2015-08-17 18:41:33 +02:00