mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 03:18:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
286 lines
6.7 KiB
C
286 lines
6.7 KiB
C
/*
|
|
* (C) Copyright 2006
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <asm/mpc8349_pci.h>
|
|
#include <i2c.h>
|
|
#include <spi.h>
|
|
#include <miiphy.h>
|
|
#ifdef CONFIG_SYS_FSL_DDR2
|
|
#include <fsl_ddr_sdram.h>
|
|
#else
|
|
#include <spd_sdram.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
|
|
int fixed_sdram(void);
|
|
void sdram_init(void);
|
|
|
|
#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
|
|
void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
|
|
|
|
/* Enable flash write */
|
|
bcsr[1] &= ~0x01;
|
|
|
|
#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
|
|
/* Use USB PHY on SYS board */
|
|
bcsr[5] |= 0x02;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
phys_size_t msize = 0;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
|
|
return -1;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
#ifndef CONFIG_SYS_FSL_DDR2
|
|
msize = spd_sdram() * 1024 * 1024;
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
ddr_enable_ecc(msize);
|
|
#endif
|
|
#else
|
|
msize = fsl_ddr_sdram();
|
|
#endif
|
|
#else
|
|
msize = fixed_sdram() * 1024 * 1024;
|
|
#endif
|
|
/*
|
|
* Initialize SDRAM if it is on local bus.
|
|
*/
|
|
sdram_init();
|
|
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
return msize;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
u32 msize = CONFIG_SYS_DDR_SIZE;
|
|
u32 ddr_size = msize << 20; /* DDR size in bytes */
|
|
u32 ddr_size_log2 = __ilog2(ddr_size);
|
|
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
|
|
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
|
|
#if (CONFIG_SYS_DDR_SIZE != 256)
|
|
#warning Currenly any ddr size other than 256 is not supported
|
|
#endif
|
|
#ifdef CONFIG_DDR_II
|
|
im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS;
|
|
im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
|
|
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
|
|
#else
|
|
|
|
#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
|
|
#warning Chip select bounds is only configurable in 16MB increments
|
|
#endif
|
|
im->ddr.csbnds[2].csbnds =
|
|
((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
|
(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
|
|
CSBNDS_EA_SHIFT) & CSBNDS_EA);
|
|
im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
|
|
|
|
/* currently we use only one CS, so disable the other banks */
|
|
im->ddr.cs_config[0] = 0;
|
|
im->ddr.cs_config[1] = 0;
|
|
im->ddr.cs_config[3] = 0;
|
|
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
|
|
im->ddr.sdram_cfg =
|
|
SDRAM_CFG_SREN
|
|
#if defined(CONFIG_DDR_2T_TIMING)
|
|
| SDRAM_CFG_2T_EN
|
|
#endif
|
|
| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
|
|
#if defined (CONFIG_DDR_32BIT)
|
|
/* for 32-bit mode burst length is 8 */
|
|
im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
|
|
#endif
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
#endif
|
|
udelay(200);
|
|
|
|
/* enable DDR controller */
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
return msize;
|
|
}
|
|
#endif/*!CONFIG_SYS_SPD_EEPROM*/
|
|
|
|
|
|
int checkboard (void)
|
|
{
|
|
/*
|
|
* Warning: do not read the BCSR registers here
|
|
*
|
|
* There is a timing bug in the 8349E and 8349EA BCSR code
|
|
* version 1.2 (read from BCSR 11) that will cause the CFI
|
|
* flash initialization code to overwrite BCSR 0, disabling
|
|
* the serial ports and gigabit ethernet
|
|
*/
|
|
|
|
puts("Board: Freescale MPC8349EMDS\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if MPC8349EMDS is soldered with SDRAM
|
|
*/
|
|
#if defined(CONFIG_SYS_BR2_PRELIM) \
|
|
&& defined(CONFIG_SYS_OR2_PRELIM) \
|
|
&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
|
|
&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
|
|
void sdram_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile fsl_lbc_t *lbc = &immap->im_lbc;
|
|
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
|
|
|
|
/*
|
|
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
|
|
*/
|
|
|
|
/* setup mtrpt, lsrt and lbcr for LB bus */
|
|
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
|
|
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
|
|
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
|
|
asm("sync");
|
|
|
|
/*
|
|
* Configure the SDRAM controller Machine Mode Register.
|
|
*/
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
|
|
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
|
|
asm("sync");
|
|
/*1 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*2 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*3 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*4 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*5 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*6 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*7 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*8 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/* 0x58636733; mode register write operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
}
|
|
#else
|
|
void sdram_init(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* The following are used to control the SPI chip selects for the SPI command.
|
|
*/
|
|
#ifdef CONFIG_MPC8XXX_SPI
|
|
|
|
#define SPI_CS_MASK 0x80000000
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs == 0;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
|
|
|
|
iopd->dat &= ~SPI_CS_MASK;
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
|
|
|
|
iopd->dat |= SPI_CS_MASK;
|
|
}
|
|
#endif /* CONFIG_HARD_SPI */
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|