mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 13:58:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
We try to avoid typedefs and these ones are easy enough to remove. Before changing this header in the next patch, remove the typedefs. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
190 lines
5.4 KiB
C
190 lines
5.4 KiB
C
/*
|
|
* Driver for AT91/AT32 LCD Controller
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <lcd.h>
|
|
#include <bmp_layout.h>
|
|
#include <atmel_lcdc.h>
|
|
|
|
/* configurable parameters */
|
|
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
|
|
#define ATMEL_LCDC_DMA_BURST_LEN 8
|
|
#ifndef ATMEL_LCDC_GUARD_TIME
|
|
#define ATMEL_LCDC_GUARD_TIME 1
|
|
#endif
|
|
|
|
#if defined(CONFIG_AT91SAM9263)
|
|
#define ATMEL_LCDC_FIFO_SIZE 2048
|
|
#else
|
|
#define ATMEL_LCDC_FIFO_SIZE 512
|
|
#endif
|
|
|
|
#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
|
|
#define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg))
|
|
|
|
ushort *configuration_get_cmap(void)
|
|
{
|
|
return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
|
|
}
|
|
|
|
#if defined(CONFIG_BMP_16BPP) && defined(CONFIG_ATMEL_LCD_BGR555)
|
|
void fb_put_word(uchar **fb, uchar **from)
|
|
{
|
|
*(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03);
|
|
*(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2);
|
|
*from += 2;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_LCD_LOGO
|
|
#include <bmp_logo.h>
|
|
void lcd_logo_set_cmap(void)
|
|
{
|
|
int i;
|
|
uint lut_entry;
|
|
ushort colreg;
|
|
uint *cmap = (uint *)configuration_get_cmap();
|
|
|
|
for (i = 0; i < BMP_LOGO_COLORS; ++i) {
|
|
colreg = bmp_logo_palette[i];
|
|
#ifdef CONFIG_ATMEL_LCD_BGR555
|
|
lut_entry = ((colreg & 0x000F) << 11) |
|
|
((colreg & 0x00F0) << 2) |
|
|
((colreg & 0x0F00) >> 7);
|
|
#else
|
|
lut_entry = ((colreg & 0x000F) << 1) |
|
|
((colreg & 0x00F0) << 3) |
|
|
((colreg & 0x0F00) << 4);
|
|
#endif
|
|
*(cmap + BMP_LOGO_OFFSET) = lut_entry;
|
|
cmap++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
|
|
{
|
|
#if defined(CONFIG_ATMEL_LCD_BGR555)
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
|
|
(red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7));
|
|
#else
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
|
|
(blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8));
|
|
#endif
|
|
}
|
|
|
|
void lcd_set_cmap(struct bmp_image *bmp, unsigned colors)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < colors; ++i) {
|
|
struct bmp_color_table_entry cte = bmp->color_table[i];
|
|
lcd_setcolreg(i, cte.red, cte.green, cte.blue);
|
|
}
|
|
}
|
|
|
|
void lcd_ctrl_init(void *lcdbase)
|
|
{
|
|
unsigned long value;
|
|
|
|
/* Turn off the LCD controller and the DMA controller */
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
|
|
ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET);
|
|
|
|
/* Wait for the LCDC core to become idle */
|
|
while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
|
|
udelay(10);
|
|
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
|
|
|
|
/* Reset LCDC DMA */
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
|
|
|
|
/* ...set frame size and burst length = 8 words (?) */
|
|
value = (panel_info.vl_col * panel_info.vl_row *
|
|
NBITS(panel_info.vl_bpix)) / 32;
|
|
value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
|
|
|
|
/* Set pixel clock */
|
|
value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
|
|
if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
|
|
value++;
|
|
value = (value / 2) - 1;
|
|
|
|
if (!value) {
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
|
|
} else
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
|
|
value << ATMEL_LCDC_CLKVAL_OFFSET);
|
|
|
|
/* Initialize control register 2 */
|
|
#ifdef CONFIG_AVR32
|
|
value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
|
|
#else
|
|
value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
|
|
#endif
|
|
if (panel_info.vl_tft)
|
|
value |= ATMEL_LCDC_DISTYPE_TFT;
|
|
|
|
value |= panel_info.vl_sync;
|
|
value |= (panel_info.vl_bpix << 5);
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
|
|
|
|
/* Vertical timing */
|
|
value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
|
|
value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
|
|
value |= panel_info.vl_lower_margin;
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
|
|
|
|
/* Horizontal timing */
|
|
value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
|
|
value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
|
|
value |= (panel_info.vl_left_margin - 1);
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
|
|
|
|
/* Display size */
|
|
value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
|
|
value |= panel_info.vl_row - 1;
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
|
|
|
|
/* FIFO Threshold: Use formula from data sheet */
|
|
value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
|
|
|
|
/* Toggle LCD_MODE every frame */
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
|
|
|
|
/* Disable all interrupts */
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
|
|
|
|
/* Set contrast */
|
|
value = ATMEL_LCDC_PS_DIV8 |
|
|
ATMEL_LCDC_ENA_PWMENABLE;
|
|
if (!panel_info.vl_cont_pol_low)
|
|
value |= ATMEL_LCDC_POL_POSITIVE;
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
|
|
|
|
/* Set framebuffer DMA base address and pixel offset */
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
|
|
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
|
|
lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
|
|
(ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
|
|
}
|
|
|
|
ulong calc_fbsize(void)
|
|
{
|
|
return ((panel_info.vl_col * panel_info.vl_row *
|
|
NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
|
|
}
|