mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-26 11:58:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
1307 lines
32 KiB
C
1307 lines
32 KiB
C
/*------------------------------------------------------------------------
|
|
. smc91111.c
|
|
. This is a driver for SMSC's 91C111 single-chip Ethernet device.
|
|
.
|
|
. (C) Copyright 2002
|
|
. Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
. Rolf Offermanns <rof@sysgo.de>
|
|
.
|
|
. Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
|
|
. Developed by Simple Network Magic Corporation (SNMC)
|
|
. Copyright (C) 1996 by Erik Stahlman (ES)
|
|
.
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
.
|
|
. Information contained in this file was obtained from the LAN91C111
|
|
. manual from SMC. To get a copy, if you really want one, you can find
|
|
. information under www.smsc.com.
|
|
.
|
|
.
|
|
. "Features" of the SMC chip:
|
|
. Integrated PHY/MAC for 10/100BaseT Operation
|
|
. Supports internal and external MII
|
|
. Integrated 8K packet memory
|
|
. EEPROM interface for configuration
|
|
.
|
|
. Arguments:
|
|
. io = for the base address
|
|
. irq = for the IRQ
|
|
.
|
|
. author:
|
|
. Erik Stahlman ( erik@vt.edu )
|
|
. Daris A Nevil ( dnevil@snmc.com )
|
|
.
|
|
.
|
|
. Hardware multicast code from Peter Cammaert ( pc@denkart.be )
|
|
.
|
|
. Sources:
|
|
. o SMSC LAN91C111 databook (www.smsc.com)
|
|
. o smc9194.c by Erik Stahlman
|
|
. o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
|
|
.
|
|
. History:
|
|
. 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks.
|
|
. 10/17/01 Marco Hasewinkel Modify for DNP/1110
|
|
. 07/25/01 Woojung Huh Modify for ADS Bitsy
|
|
. 04/25/01 Daris A Nevil Initial public release through SMSC
|
|
. 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
|
|
----------------------------------------------------------------------------*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <malloc.h>
|
|
#include "smc91111.h"
|
|
#include <net.h>
|
|
|
|
/* Use power-down feature of the chip */
|
|
#define POWER_DOWN 0
|
|
|
|
#define NO_AUTOPROBE
|
|
|
|
#define SMC_DEBUG 0
|
|
|
|
#if SMC_DEBUG > 1
|
|
static const char version[] =
|
|
"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
|
|
#endif
|
|
|
|
/* Autonegotiation timeout in seconds */
|
|
#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
|
|
#define CONFIG_SMC_AUTONEG_TIMEOUT 10
|
|
#endif
|
|
|
|
/*------------------------------------------------------------------------
|
|
.
|
|
. Configuration options, for the experienced user to change.
|
|
.
|
|
-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
. Wait time for memory to be free. This probably shouldn't be
|
|
. tuned that much, as waiting for this means nothing else happens
|
|
. in the system
|
|
*/
|
|
#define MEMORY_WAIT_TIME 16
|
|
|
|
|
|
#if (SMC_DEBUG > 2 )
|
|
#define PRINTK3(args...) printf(args)
|
|
#else
|
|
#define PRINTK3(args...)
|
|
#endif
|
|
|
|
#if SMC_DEBUG > 1
|
|
#define PRINTK2(args...) printf(args)
|
|
#else
|
|
#define PRINTK2(args...)
|
|
#endif
|
|
|
|
#ifdef SMC_DEBUG
|
|
#define PRINTK(args...) printf(args)
|
|
#else
|
|
#define PRINTK(args...)
|
|
#endif
|
|
|
|
|
|
/*------------------------------------------------------------------------
|
|
.
|
|
. The internal workings of the driver. If you are changing anything
|
|
. here with the SMC stuff, you should have the datasheet and know
|
|
. what you are doing.
|
|
.
|
|
-------------------------------------------------------------------------*/
|
|
|
|
/* Memory sizing constant */
|
|
#define LAN91C111_MEMORY_MULTIPLIER (1024*2)
|
|
|
|
#ifndef CONFIG_SMC91111_BASE
|
|
#error "SMC91111 Base address must be passed to initialization funciton"
|
|
/* #define CONFIG_SMC91111_BASE 0x20000300 */
|
|
#endif
|
|
|
|
#define SMC_DEV_NAME "SMC91111"
|
|
#define SMC_PHY_ADDR 0x0000
|
|
#define SMC_ALLOC_MAX_TRY 5
|
|
#define SMC_TX_TIMEOUT 30
|
|
|
|
#define SMC_PHY_CLOCK_DELAY 1000
|
|
|
|
#define ETH_ZLEN 60
|
|
|
|
#ifdef CONFIG_SMC_USE_32_BIT
|
|
#define USE_32_BIT 1
|
|
#else
|
|
#undef USE_32_BIT
|
|
#endif
|
|
|
|
#ifdef SHARED_RESOURCES
|
|
extern void swap_to(int device_id);
|
|
#else
|
|
# define swap_to(x)
|
|
#endif
|
|
|
|
#ifndef CONFIG_SMC91111_EXT_PHY
|
|
static void smc_phy_configure(struct eth_device *dev);
|
|
#endif /* !CONFIG_SMC91111_EXT_PHY */
|
|
|
|
/*
|
|
------------------------------------------------------------
|
|
.
|
|
. Internal routines
|
|
.
|
|
------------------------------------------------------------
|
|
*/
|
|
|
|
#ifdef CONFIG_SMC_USE_IOFUNCS
|
|
/*
|
|
* input and output functions
|
|
*
|
|
* Implemented due to inx,outx macros accessing the device improperly
|
|
* and putting the device into an unkown state.
|
|
*
|
|
* For instance, on Sharp LPD7A400 SDK, affects were chip memory
|
|
* could not be free'd (hence the alloc failures), duplicate packets,
|
|
* packets being corrupt (shifted) on the wire, etc. Switching to the
|
|
* inx,outx functions fixed this problem.
|
|
*/
|
|
|
|
static inline word SMC_inw(struct eth_device *dev, dword offset)
|
|
{
|
|
word v;
|
|
v = *((volatile word*)(dev->iobase + offset));
|
|
barrier(); *(volatile u32*)(0xc0000000);
|
|
return v;
|
|
}
|
|
|
|
static inline void SMC_outw(struct eth_device *dev, word value, dword offset)
|
|
{
|
|
*((volatile word*)(dev->iobase + offset)) = value;
|
|
barrier(); *(volatile u32*)(0xc0000000);
|
|
}
|
|
|
|
static inline byte SMC_inb(struct eth_device *dev, dword offset)
|
|
{
|
|
word _w;
|
|
|
|
_w = SMC_inw(dev, offset & ~((dword)1));
|
|
return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w);
|
|
}
|
|
|
|
static inline void SMC_outb(struct eth_device *dev, byte value, dword offset)
|
|
{
|
|
word _w;
|
|
|
|
_w = SMC_inw(dev, offset & ~((dword)1));
|
|
if (offset & 1)
|
|
*((volatile word*)(dev->iobase + (offset & ~((dword)1)))) =
|
|
(value<<8) | (_w & 0x00ff);
|
|
else
|
|
*((volatile word*)(dev->iobase + offset)) =
|
|
value | (_w & 0xff00);
|
|
}
|
|
|
|
static inline void SMC_insw(struct eth_device *dev, dword offset,
|
|
volatile uchar* buf, dword len)
|
|
{
|
|
volatile word *p = (volatile word *)buf;
|
|
|
|
while (len-- > 0) {
|
|
*p++ = SMC_inw(dev, offset);
|
|
barrier();
|
|
*((volatile u32*)(0xc0000000));
|
|
}
|
|
}
|
|
|
|
static inline void SMC_outsw(struct eth_device *dev, dword offset,
|
|
uchar* buf, dword len)
|
|
{
|
|
volatile word *p = (volatile word *)buf;
|
|
|
|
while (len-- > 0) {
|
|
SMC_outw(dev, *p++, offset);
|
|
barrier();
|
|
*(volatile u32*)(0xc0000000);
|
|
}
|
|
}
|
|
#endif /* CONFIG_SMC_USE_IOFUNCS */
|
|
|
|
/*
|
|
. A rather simple routine to print out a packet for debugging purposes.
|
|
*/
|
|
#if SMC_DEBUG > 2
|
|
static void print_packet( byte *, int );
|
|
#endif
|
|
|
|
#define tx_done(dev) 1
|
|
|
|
static int poll4int (struct eth_device *dev, byte mask, int timeout)
|
|
{
|
|
int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
|
|
int is_timeout = 0;
|
|
word old_bank = SMC_inw (dev, BSR_REG);
|
|
|
|
PRINTK2 ("Polling...\n");
|
|
SMC_SELECT_BANK (dev, 2);
|
|
while ((SMC_inw (dev, SMC91111_INT_REG) & mask) == 0) {
|
|
if (get_timer (0) >= tmo) {
|
|
is_timeout = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* restore old bank selection */
|
|
SMC_SELECT_BANK (dev, old_bank);
|
|
|
|
if (is_timeout)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* Only one release command at a time, please */
|
|
static inline void smc_wait_mmu_release_complete (struct eth_device *dev)
|
|
{
|
|
int count = 0;
|
|
|
|
/* assume bank 2 selected */
|
|
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
|
|
udelay (1); /* Wait until not busy */
|
|
if (++count > 200)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
. Function: smc_reset( void )
|
|
. Purpose:
|
|
. This sets the SMC91111 chip to its normal state, hopefully from whatever
|
|
. mess that any other DOS driver has put it in.
|
|
.
|
|
. Maybe I should reset more registers to defaults in here? SOFTRST should
|
|
. do that for me.
|
|
.
|
|
. Method:
|
|
. 1. send a SOFT RESET
|
|
. 2. wait for it to finish
|
|
. 3. enable autorelease mode
|
|
. 4. reset the memory management unit
|
|
. 5. clear all interrupts
|
|
.
|
|
*/
|
|
static void smc_reset (struct eth_device *dev)
|
|
{
|
|
PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);
|
|
|
|
/* This resets the registers mostly to defaults, but doesn't
|
|
affect EEPROM. That seems unnecessary */
|
|
SMC_SELECT_BANK (dev, 0);
|
|
SMC_outw (dev, RCR_SOFTRST, RCR_REG);
|
|
|
|
/* Setup the Configuration Register */
|
|
/* This is necessary because the CONFIG_REG is not affected */
|
|
/* by a soft reset */
|
|
|
|
SMC_SELECT_BANK (dev, 1);
|
|
#if defined(CONFIG_SMC91111_EXT_PHY)
|
|
SMC_outw (dev, CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
|
|
#else
|
|
SMC_outw (dev, CONFIG_DEFAULT, CONFIG_REG);
|
|
#endif
|
|
|
|
|
|
/* Release from possible power-down state */
|
|
/* Configuration register is not affected by Soft Reset */
|
|
SMC_outw (dev, SMC_inw (dev, CONFIG_REG) | CONFIG_EPH_POWER_EN,
|
|
CONFIG_REG);
|
|
|
|
SMC_SELECT_BANK (dev, 0);
|
|
|
|
/* this should pause enough for the chip to be happy */
|
|
udelay (10);
|
|
|
|
/* Disable transmit and receive functionality */
|
|
SMC_outw (dev, RCR_CLEAR, RCR_REG);
|
|
SMC_outw (dev, TCR_CLEAR, TCR_REG);
|
|
|
|
/* set the control register */
|
|
SMC_SELECT_BANK (dev, 1);
|
|
SMC_outw (dev, CTL_DEFAULT, CTL_REG);
|
|
|
|
/* Reset the MMU */
|
|
SMC_SELECT_BANK (dev, 2);
|
|
smc_wait_mmu_release_complete (dev);
|
|
SMC_outw (dev, MC_RESET, MMU_CMD_REG);
|
|
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY)
|
|
udelay (1); /* Wait until not busy */
|
|
|
|
/* Note: It doesn't seem that waiting for the MMU busy is needed here,
|
|
but this is a place where future chipsets _COULD_ break. Be wary
|
|
of issuing another MMU command right after this */
|
|
|
|
/* Disable all interrupts */
|
|
SMC_outb (dev, 0, IM_REG);
|
|
}
|
|
|
|
/*
|
|
. Function: smc_enable
|
|
. Purpose: let the chip talk to the outside work
|
|
. Method:
|
|
. 1. Enable the transmitter
|
|
. 2. Enable the receiver
|
|
. 3. Enable interrupts
|
|
*/
|
|
static void smc_enable(struct eth_device *dev)
|
|
{
|
|
PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
|
|
SMC_SELECT_BANK( dev, 0 );
|
|
/* see the header file for options in TCR/RCR DEFAULT*/
|
|
SMC_outw( dev, TCR_DEFAULT, TCR_REG );
|
|
SMC_outw( dev, RCR_DEFAULT, RCR_REG );
|
|
|
|
/* clear MII_DIS */
|
|
/* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */
|
|
}
|
|
|
|
/*
|
|
. Function: smc_halt
|
|
. Purpose: closes down the SMC91xxx chip.
|
|
. Method:
|
|
. 1. zero the interrupt mask
|
|
. 2. clear the enable receive flag
|
|
. 3. clear the enable xmit flags
|
|
.
|
|
. TODO:
|
|
. (1) maybe utilize power down mode.
|
|
. Why not yet? Because while the chip will go into power down mode,
|
|
. the manual says that it will wake up in response to any I/O requests
|
|
. in the register space. Empirical results do not show this working.
|
|
*/
|
|
static void smc_halt(struct eth_device *dev)
|
|
{
|
|
PRINTK2("%s: smc_halt\n", SMC_DEV_NAME);
|
|
|
|
/* no more interrupts for me */
|
|
SMC_SELECT_BANK( dev, 2 );
|
|
SMC_outb( dev, 0, IM_REG );
|
|
|
|
/* and tell the card to stay away from that nasty outside world */
|
|
SMC_SELECT_BANK( dev, 0 );
|
|
SMC_outb( dev, RCR_CLEAR, RCR_REG );
|
|
SMC_outb( dev, TCR_CLEAR, TCR_REG );
|
|
|
|
swap_to(FLASH);
|
|
}
|
|
|
|
|
|
/*
|
|
. Function: smc_send(struct net_device * )
|
|
. Purpose:
|
|
. This sends the actual packet to the SMC9xxx chip.
|
|
.
|
|
. Algorithm:
|
|
. First, see if a saved_skb is available.
|
|
. ( this should NOT be called if there is no 'saved_skb'
|
|
. Now, find the packet number that the chip allocated
|
|
. Point the data pointers at it in memory
|
|
. Set the length word in the chip's memory
|
|
. Dump the packet to chip memory
|
|
. Check if a last byte is needed ( odd length packet )
|
|
. if so, set the control flag right
|
|
. Tell the card to send it
|
|
. Enable the transmit interrupt, so I know if it failed
|
|
. Free the kernel data if I actually sent it.
|
|
*/
|
|
static int smc_send(struct eth_device *dev, void *packet, int packet_length)
|
|
{
|
|
byte packet_no;
|
|
byte *buf;
|
|
int length;
|
|
int numPages;
|
|
int try = 0;
|
|
int time_out;
|
|
byte status;
|
|
byte saved_pnr;
|
|
word saved_ptr;
|
|
|
|
/* save PTR and PNR registers before manipulation */
|
|
SMC_SELECT_BANK (dev, 2);
|
|
saved_pnr = SMC_inb( dev, PN_REG );
|
|
saved_ptr = SMC_inw( dev, PTR_REG );
|
|
|
|
PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);
|
|
|
|
length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
|
|
|
|
/* allocate memory
|
|
** The MMU wants the number of pages to be the number of 256 bytes
|
|
** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
|
|
**
|
|
** The 91C111 ignores the size bits, but the code is left intact
|
|
** for backwards and future compatibility.
|
|
**
|
|
** Pkt size for allocating is data length +6 (for additional status
|
|
** words, length and ctl!)
|
|
**
|
|
** If odd size then last byte is included in this header.
|
|
*/
|
|
numPages = ((length & 0xfffe) + 6);
|
|
numPages >>= 8; /* Divide by 256 */
|
|
|
|
if (numPages > 7) {
|
|
printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
|
|
return 0;
|
|
}
|
|
|
|
/* now, try to allocate the memory */
|
|
SMC_SELECT_BANK (dev, 2);
|
|
SMC_outw (dev, MC_ALLOC | numPages, MMU_CMD_REG);
|
|
|
|
/* FIXME: the ALLOC_INT bit never gets set *
|
|
* so the following will always give a *
|
|
* memory allocation error. *
|
|
* same code works in armboot though *
|
|
* -ro
|
|
*/
|
|
|
|
again:
|
|
try++;
|
|
time_out = MEMORY_WAIT_TIME;
|
|
do {
|
|
status = SMC_inb (dev, SMC91111_INT_REG);
|
|
if (status & IM_ALLOC_INT) {
|
|
/* acknowledge the interrupt */
|
|
SMC_outb (dev, IM_ALLOC_INT, SMC91111_INT_REG);
|
|
break;
|
|
}
|
|
} while (--time_out);
|
|
|
|
if (!time_out) {
|
|
PRINTK2 ("%s: memory allocation, try %d failed ...\n",
|
|
SMC_DEV_NAME, try);
|
|
if (try < SMC_ALLOC_MAX_TRY)
|
|
goto again;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
|
|
SMC_DEV_NAME, try);
|
|
|
|
buf = (byte *) packet;
|
|
|
|
/* If I get here, I _know_ there is a packet slot waiting for me */
|
|
packet_no = SMC_inb (dev, AR_REG);
|
|
if (packet_no & AR_FAILED) {
|
|
/* or isn't there? BAD CHIP! */
|
|
printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
|
|
return 0;
|
|
}
|
|
|
|
/* we have a packet address, so tell the card to use it */
|
|
SMC_outb (dev, packet_no, PN_REG);
|
|
|
|
/* do not write new ptr value if Write data fifo not empty */
|
|
while ( saved_ptr & PTR_NOTEMPTY )
|
|
printf ("Write data fifo not empty!\n");
|
|
|
|
/* point to the beginning of the packet */
|
|
SMC_outw (dev, PTR_AUTOINC, PTR_REG);
|
|
|
|
PRINTK3 ("%s: Trying to xmit packet of length %x\n",
|
|
SMC_DEV_NAME, length);
|
|
|
|
#if SMC_DEBUG > 2
|
|
printf ("Transmitting Packet\n");
|
|
print_packet (buf, length);
|
|
#endif
|
|
|
|
/* send the packet length ( +6 for status, length and ctl byte )
|
|
and the status word ( set to zeros ) */
|
|
#ifdef USE_32_BIT
|
|
SMC_outl (dev, (length + 6) << 16, SMC91111_DATA_REG);
|
|
#else
|
|
SMC_outw (dev, 0, SMC91111_DATA_REG);
|
|
/* send the packet length ( +6 for status words, length, and ctl */
|
|
SMC_outw (dev, (length + 6), SMC91111_DATA_REG);
|
|
#endif
|
|
|
|
/* send the actual data
|
|
. I _think_ it's faster to send the longs first, and then
|
|
. mop up by sending the last word. It depends heavily
|
|
. on alignment, at least on the 486. Maybe it would be
|
|
. a good idea to check which is optimal? But that could take
|
|
. almost as much time as is saved?
|
|
*/
|
|
#ifdef USE_32_BIT
|
|
SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2);
|
|
if (length & 0x2)
|
|
SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))),
|
|
SMC91111_DATA_REG);
|
|
#else
|
|
SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1);
|
|
#endif /* USE_32_BIT */
|
|
|
|
/* Send the last byte, if there is one. */
|
|
if ((length & 1) == 0) {
|
|
SMC_outw (dev, 0, SMC91111_DATA_REG);
|
|
} else {
|
|
SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG);
|
|
}
|
|
|
|
/* and let the chipset deal with it */
|
|
SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG);
|
|
|
|
/* poll for TX INT */
|
|
/* if (poll4int (dev, IM_TX_INT, SMC_TX_TIMEOUT)) { */
|
|
/* poll for TX_EMPTY INT - autorelease enabled */
|
|
if (poll4int(dev, IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) {
|
|
/* sending failed */
|
|
PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
|
|
|
|
/* release packet */
|
|
/* no need to release, MMU does that now */
|
|
|
|
/* wait for MMU getting ready (low) */
|
|
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
|
|
udelay (10);
|
|
}
|
|
|
|
PRINTK2 ("MMU ready\n");
|
|
|
|
|
|
return 0;
|
|
} else {
|
|
/* ack. int */
|
|
SMC_outb (dev, IM_TX_EMPTY_INT, SMC91111_INT_REG);
|
|
/* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */
|
|
PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
|
|
length);
|
|
|
|
/* release packet */
|
|
/* no need to release, MMU does that now */
|
|
|
|
/* wait for MMU getting ready (low) */
|
|
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
|
|
udelay (10);
|
|
}
|
|
|
|
PRINTK2 ("MMU ready\n");
|
|
|
|
|
|
}
|
|
|
|
/* restore previously saved registers */
|
|
SMC_outb( dev, saved_pnr, PN_REG );
|
|
SMC_outw( dev, saved_ptr, PTR_REG );
|
|
|
|
return length;
|
|
}
|
|
|
|
static int smc_write_hwaddr(struct eth_device *dev)
|
|
{
|
|
int i;
|
|
|
|
swap_to(ETHERNET);
|
|
SMC_SELECT_BANK (dev, 1);
|
|
#ifdef USE_32_BIT
|
|
for (i = 0; i < 6; i += 2) {
|
|
word address;
|
|
|
|
address = dev->enetaddr[i + 1] << 8;
|
|
address |= dev->enetaddr[i];
|
|
SMC_outw(dev, address, (ADDR0_REG + i));
|
|
}
|
|
#else
|
|
for (i = 0; i < 6; i++)
|
|
SMC_outb(dev, dev->enetaddr[i], (ADDR0_REG + i));
|
|
#endif
|
|
swap_to(FLASH);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Open and Initialize the board
|
|
*
|
|
* Set up everything, reset the card, etc ..
|
|
*
|
|
*/
|
|
static int smc_init(struct eth_device *dev, bd_t *bd)
|
|
{
|
|
swap_to(ETHERNET);
|
|
|
|
PRINTK2 ("%s: smc_init\n", SMC_DEV_NAME);
|
|
|
|
/* reset the hardware */
|
|
smc_reset (dev);
|
|
smc_enable (dev);
|
|
|
|
/* Configure the PHY */
|
|
#ifndef CONFIG_SMC91111_EXT_PHY
|
|
smc_phy_configure (dev);
|
|
#endif
|
|
|
|
/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
|
|
/* SMC_SELECT_BANK(dev, 0); */
|
|
/* SMC_outw(dev, 0, RPC_REG); */
|
|
|
|
printf(SMC_DEV_NAME ": MAC %pM\n", dev->enetaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------
|
|
.
|
|
. smc_rcv - receive a packet from the card
|
|
.
|
|
. There is ( at least ) a packet waiting to be read from
|
|
. chip-memory.
|
|
.
|
|
. o Read the status
|
|
. o If an error, record it
|
|
. o otherwise, read in the packet
|
|
--------------------------------------------------------------
|
|
*/
|
|
static int smc_rcv(struct eth_device *dev)
|
|
{
|
|
int packet_number;
|
|
word status;
|
|
word packet_length;
|
|
int is_error = 0;
|
|
#ifdef USE_32_BIT
|
|
dword stat_len;
|
|
#endif
|
|
byte saved_pnr;
|
|
word saved_ptr;
|
|
|
|
SMC_SELECT_BANK(dev, 2);
|
|
/* save PTR and PTR registers */
|
|
saved_pnr = SMC_inb( dev, PN_REG );
|
|
saved_ptr = SMC_inw( dev, PTR_REG );
|
|
|
|
packet_number = SMC_inw( dev, RXFIFO_REG );
|
|
|
|
if ( packet_number & RXFIFO_REMPTY ) {
|
|
|
|
return 0;
|
|
}
|
|
|
|
PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
|
|
/* start reading from the start of the packet */
|
|
SMC_outw( dev, PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
|
|
|
|
/* First two words are status and packet_length */
|
|
#ifdef USE_32_BIT
|
|
stat_len = SMC_inl(dev, SMC91111_DATA_REG);
|
|
status = stat_len & 0xffff;
|
|
packet_length = stat_len >> 16;
|
|
#else
|
|
status = SMC_inw( dev, SMC91111_DATA_REG );
|
|
packet_length = SMC_inw( dev, SMC91111_DATA_REG );
|
|
#endif
|
|
|
|
packet_length &= 0x07ff; /* mask off top bits */
|
|
|
|
PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length );
|
|
|
|
if ( !(status & RS_ERRORS ) ){
|
|
/* Adjust for having already read the first two words */
|
|
packet_length -= 4; /*4; */
|
|
|
|
|
|
/* set odd length for bug in LAN91C111, */
|
|
/* which never sets RS_ODDFRAME */
|
|
/* TODO ? */
|
|
|
|
|
|
#ifdef USE_32_BIT
|
|
PRINTK3(" Reading %d dwords (and %d bytes)\n",
|
|
packet_length >> 2, packet_length & 3 );
|
|
/* QUESTION: Like in the TX routine, do I want
|
|
to send the DWORDs or the bytes first, or some
|
|
mixture. A mixture might improve already slow PIO
|
|
performance */
|
|
SMC_insl(dev, SMC91111_DATA_REG, net_rx_packets[0],
|
|
packet_length >> 2);
|
|
/* read the left over bytes */
|
|
if (packet_length & 3) {
|
|
int i;
|
|
|
|
byte *tail = (byte *)(net_rx_packets[0] +
|
|
(packet_length & ~3));
|
|
dword leftover = SMC_inl(dev, SMC91111_DATA_REG);
|
|
for (i=0; i<(packet_length & 3); i++)
|
|
*tail++ = (byte) (leftover >> (8*i)) & 0xff;
|
|
}
|
|
#else
|
|
PRINTK3(" Reading %d words and %d byte(s)\n",
|
|
(packet_length >> 1 ), packet_length & 1 );
|
|
SMC_insw(dev, SMC91111_DATA_REG , net_rx_packets[0],
|
|
packet_length >> 1);
|
|
|
|
#endif /* USE_32_BIT */
|
|
|
|
#if SMC_DEBUG > 2
|
|
printf("Receiving Packet\n");
|
|
print_packet(net_rx_packets[0], packet_length);
|
|
#endif
|
|
} else {
|
|
/* error ... */
|
|
/* TODO ? */
|
|
is_error = 1;
|
|
}
|
|
|
|
while ( SMC_inw( dev, MMU_CMD_REG ) & MC_BUSY )
|
|
udelay(1); /* Wait until not busy */
|
|
|
|
/* error or good, tell the card to get rid of this packet */
|
|
SMC_outw( dev, MC_RELEASE, MMU_CMD_REG );
|
|
|
|
while ( SMC_inw( dev, MMU_CMD_REG ) & MC_BUSY )
|
|
udelay(1); /* Wait until not busy */
|
|
|
|
/* restore saved registers */
|
|
SMC_outb( dev, saved_pnr, PN_REG );
|
|
SMC_outw( dev, saved_ptr, PTR_REG );
|
|
|
|
if (!is_error) {
|
|
/* Pass the packet up to the protocol layers. */
|
|
net_process_received_packet(net_rx_packets[0], packet_length);
|
|
return packet_length;
|
|
} else {
|
|
return 0;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
#if 0
|
|
/*------------------------------------------------------------
|
|
. Modify a bit in the LAN91C111 register set
|
|
.-------------------------------------------------------------*/
|
|
static word smc_modify_regbit(struct eth_device *dev, int bank, int ioaddr, int reg,
|
|
unsigned int bit, int val)
|
|
{
|
|
word regval;
|
|
|
|
SMC_SELECT_BANK( dev, bank );
|
|
|
|
regval = SMC_inw( dev, reg );
|
|
if (val)
|
|
regval |= bit;
|
|
else
|
|
regval &= ~bit;
|
|
|
|
SMC_outw( dev, regval, 0 );
|
|
return(regval);
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------
|
|
. Retrieve a bit in the LAN91C111 register set
|
|
.-------------------------------------------------------------*/
|
|
static int smc_get_regbit(struct eth_device *dev, int bank, int ioaddr, int reg, unsigned int bit)
|
|
{
|
|
SMC_SELECT_BANK( dev, bank );
|
|
if ( SMC_inw( dev, reg ) & bit)
|
|
return(1);
|
|
else
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------
|
|
. Modify a LAN91C111 register (word access only)
|
|
.-------------------------------------------------------------*/
|
|
static void smc_modify_reg(struct eth_device *dev, int bank, int ioaddr, int reg, word val)
|
|
{
|
|
SMC_SELECT_BANK( dev, bank );
|
|
SMC_outw( dev, val, reg );
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------
|
|
. Retrieve a LAN91C111 register (word access only)
|
|
.-------------------------------------------------------------*/
|
|
static int smc_get_reg(struct eth_device *dev, int bank, int ioaddr, int reg)
|
|
{
|
|
SMC_SELECT_BANK( dev, bank );
|
|
return(SMC_inw( dev, reg ));
|
|
}
|
|
|
|
#endif /* 0 */
|
|
|
|
/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */
|
|
|
|
#if (SMC_DEBUG > 2 )
|
|
|
|
/*------------------------------------------------------------
|
|
. Debugging function for viewing MII Management serial bitstream
|
|
.-------------------------------------------------------------*/
|
|
static void smc_dump_mii_stream (byte * bits, int size)
|
|
{
|
|
int i;
|
|
|
|
printf ("BIT#:");
|
|
for (i = 0; i < size; ++i) {
|
|
printf ("%d", i % 10);
|
|
}
|
|
|
|
printf ("\nMDOE:");
|
|
for (i = 0; i < size; ++i) {
|
|
if (bits[i] & MII_MDOE)
|
|
printf ("1");
|
|
else
|
|
printf ("0");
|
|
}
|
|
|
|
printf ("\nMDO :");
|
|
for (i = 0; i < size; ++i) {
|
|
if (bits[i] & MII_MDO)
|
|
printf ("1");
|
|
else
|
|
printf ("0");
|
|
}
|
|
|
|
printf ("\nMDI :");
|
|
for (i = 0; i < size; ++i) {
|
|
if (bits[i] & MII_MDI)
|
|
printf ("1");
|
|
else
|
|
printf ("0");
|
|
}
|
|
|
|
printf ("\n");
|
|
}
|
|
#endif
|
|
|
|
/*------------------------------------------------------------
|
|
. Reads a register from the MII Management serial interface
|
|
.-------------------------------------------------------------*/
|
|
#ifndef CONFIG_SMC91111_EXT_PHY
|
|
static word smc_read_phy_register (struct eth_device *dev, byte phyreg)
|
|
{
|
|
int oldBank;
|
|
int i;
|
|
byte mask;
|
|
word mii_reg;
|
|
byte bits[64];
|
|
int clk_idx = 0;
|
|
int input_idx;
|
|
word phydata;
|
|
byte phyaddr = SMC_PHY_ADDR;
|
|
|
|
/* 32 consecutive ones on MDO to establish sync */
|
|
for (i = 0; i < 32; ++i)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
|
|
/* Start code <01> */
|
|
bits[clk_idx++] = MII_MDOE;
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
|
|
/* Read command <10> */
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
bits[clk_idx++] = MII_MDOE;
|
|
|
|
/* Output the PHY address, msb first */
|
|
mask = (byte) 0x10;
|
|
for (i = 0; i < 5; ++i) {
|
|
if (phyaddr & mask)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
else
|
|
bits[clk_idx++] = MII_MDOE;
|
|
|
|
/* Shift to next lowest bit */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* Output the phy register number, msb first */
|
|
mask = (byte) 0x10;
|
|
for (i = 0; i < 5; ++i) {
|
|
if (phyreg & mask)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
else
|
|
bits[clk_idx++] = MII_MDOE;
|
|
|
|
/* Shift to next lowest bit */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* Tristate and turnaround (2 bit times) */
|
|
bits[clk_idx++] = 0;
|
|
/*bits[clk_idx++] = 0; */
|
|
|
|
/* Input starts at this bit time */
|
|
input_idx = clk_idx;
|
|
|
|
/* Will input 16 bits */
|
|
for (i = 0; i < 16; ++i)
|
|
bits[clk_idx++] = 0;
|
|
|
|
/* Final clock bit */
|
|
bits[clk_idx++] = 0;
|
|
|
|
/* Save the current bank */
|
|
oldBank = SMC_inw (dev, BANK_SELECT);
|
|
|
|
/* Select bank 3 */
|
|
SMC_SELECT_BANK (dev, 3);
|
|
|
|
/* Get the current MII register value */
|
|
mii_reg = SMC_inw (dev, MII_REG);
|
|
|
|
/* Turn off all MII Interface bits */
|
|
mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
|
|
|
|
/* Clock all 64 cycles */
|
|
for (i = 0; i < sizeof bits; ++i) {
|
|
/* Clock Low - output data */
|
|
SMC_outw (dev, mii_reg | bits[i], MII_REG);
|
|
udelay (SMC_PHY_CLOCK_DELAY);
|
|
|
|
|
|
/* Clock Hi - input data */
|
|
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
|
|
udelay (SMC_PHY_CLOCK_DELAY);
|
|
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
|
|
}
|
|
|
|
/* Return to idle state */
|
|
/* Set clock to low, data to low, and output tristated */
|
|
SMC_outw (dev, mii_reg, MII_REG);
|
|
udelay (SMC_PHY_CLOCK_DELAY);
|
|
|
|
/* Restore original bank select */
|
|
SMC_SELECT_BANK (dev, oldBank);
|
|
|
|
/* Recover input data */
|
|
phydata = 0;
|
|
for (i = 0; i < 16; ++i) {
|
|
phydata <<= 1;
|
|
|
|
if (bits[input_idx++] & MII_MDI)
|
|
phydata |= 0x0001;
|
|
}
|
|
|
|
#if (SMC_DEBUG > 2 )
|
|
printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
|
|
phyaddr, phyreg, phydata);
|
|
smc_dump_mii_stream (bits, sizeof bits);
|
|
#endif
|
|
|
|
return (phydata);
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------
|
|
. Writes a register to the MII Management serial interface
|
|
.-------------------------------------------------------------*/
|
|
static void smc_write_phy_register (struct eth_device *dev, byte phyreg,
|
|
word phydata)
|
|
{
|
|
int oldBank;
|
|
int i;
|
|
word mask;
|
|
word mii_reg;
|
|
byte bits[65];
|
|
int clk_idx = 0;
|
|
byte phyaddr = SMC_PHY_ADDR;
|
|
|
|
/* 32 consecutive ones on MDO to establish sync */
|
|
for (i = 0; i < 32; ++i)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
|
|
/* Start code <01> */
|
|
bits[clk_idx++] = MII_MDOE;
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
|
|
/* Write command <01> */
|
|
bits[clk_idx++] = MII_MDOE;
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
|
|
/* Output the PHY address, msb first */
|
|
mask = (byte) 0x10;
|
|
for (i = 0; i < 5; ++i) {
|
|
if (phyaddr & mask)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
else
|
|
bits[clk_idx++] = MII_MDOE;
|
|
|
|
/* Shift to next lowest bit */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* Output the phy register number, msb first */
|
|
mask = (byte) 0x10;
|
|
for (i = 0; i < 5; ++i) {
|
|
if (phyreg & mask)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
else
|
|
bits[clk_idx++] = MII_MDOE;
|
|
|
|
/* Shift to next lowest bit */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* Tristate and turnaround (2 bit times) */
|
|
bits[clk_idx++] = 0;
|
|
bits[clk_idx++] = 0;
|
|
|
|
/* Write out 16 bits of data, msb first */
|
|
mask = 0x8000;
|
|
for (i = 0; i < 16; ++i) {
|
|
if (phydata & mask)
|
|
bits[clk_idx++] = MII_MDOE | MII_MDO;
|
|
else
|
|
bits[clk_idx++] = MII_MDOE;
|
|
|
|
/* Shift to next lowest bit */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* Final clock bit (tristate) */
|
|
bits[clk_idx++] = 0;
|
|
|
|
/* Save the current bank */
|
|
oldBank = SMC_inw (dev, BANK_SELECT);
|
|
|
|
/* Select bank 3 */
|
|
SMC_SELECT_BANK (dev, 3);
|
|
|
|
/* Get the current MII register value */
|
|
mii_reg = SMC_inw (dev, MII_REG);
|
|
|
|
/* Turn off all MII Interface bits */
|
|
mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
|
|
|
|
/* Clock all cycles */
|
|
for (i = 0; i < sizeof bits; ++i) {
|
|
/* Clock Low - output data */
|
|
SMC_outw (dev, mii_reg | bits[i], MII_REG);
|
|
udelay (SMC_PHY_CLOCK_DELAY);
|
|
|
|
|
|
/* Clock Hi - input data */
|
|
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
|
|
udelay (SMC_PHY_CLOCK_DELAY);
|
|
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
|
|
}
|
|
|
|
/* Return to idle state */
|
|
/* Set clock to low, data to low, and output tristated */
|
|
SMC_outw (dev, mii_reg, MII_REG);
|
|
udelay (SMC_PHY_CLOCK_DELAY);
|
|
|
|
/* Restore original bank select */
|
|
SMC_SELECT_BANK (dev, oldBank);
|
|
|
|
#if (SMC_DEBUG > 2 )
|
|
printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
|
|
phyaddr, phyreg, phydata);
|
|
smc_dump_mii_stream (bits, sizeof bits);
|
|
#endif
|
|
}
|
|
#endif /* !CONFIG_SMC91111_EXT_PHY */
|
|
|
|
|
|
/*------------------------------------------------------------
|
|
. Configures the specified PHY using Autonegotiation. Calls
|
|
. smc_phy_fixed() if the user has requested a certain config.
|
|
.-------------------------------------------------------------*/
|
|
#ifndef CONFIG_SMC91111_EXT_PHY
|
|
static void smc_phy_configure (struct eth_device *dev)
|
|
{
|
|
int timeout;
|
|
word my_phy_caps; /* My PHY capabilities */
|
|
word my_ad_caps; /* My Advertised capabilities */
|
|
word status = 0; /*;my status = 0 */
|
|
|
|
PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
|
|
|
|
/* Reset the PHY, setting all other bits to zero */
|
|
smc_write_phy_register (dev, PHY_CNTL_REG, PHY_CNTL_RST);
|
|
|
|
/* Wait for the reset to complete, or time out */
|
|
timeout = 6; /* Wait up to 3 seconds */
|
|
while (timeout--) {
|
|
if (!(smc_read_phy_register (dev, PHY_CNTL_REG)
|
|
& PHY_CNTL_RST)) {
|
|
/* reset complete */
|
|
break;
|
|
}
|
|
|
|
mdelay(500); /* wait 500 millisecs */
|
|
}
|
|
|
|
if (timeout < 1) {
|
|
printf ("%s:PHY reset timed out\n", SMC_DEV_NAME);
|
|
goto smc_phy_configure_exit;
|
|
}
|
|
|
|
/* Read PHY Register 18, Status Output */
|
|
/* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */
|
|
|
|
/* Enable PHY Interrupts (for register 18) */
|
|
/* Interrupts listed here are disabled */
|
|
smc_write_phy_register (dev, PHY_MASK_REG, 0xffff);
|
|
|
|
/* Configure the Receive/Phy Control register */
|
|
SMC_SELECT_BANK (dev, 0);
|
|
SMC_outw (dev, RPC_DEFAULT, RPC_REG);
|
|
|
|
/* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
|
|
my_phy_caps = smc_read_phy_register (dev, PHY_STAT_REG);
|
|
my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */
|
|
|
|
if (my_phy_caps & PHY_STAT_CAP_T4)
|
|
my_ad_caps |= PHY_AD_T4;
|
|
|
|
if (my_phy_caps & PHY_STAT_CAP_TXF)
|
|
my_ad_caps |= PHY_AD_TX_FDX;
|
|
|
|
if (my_phy_caps & PHY_STAT_CAP_TXH)
|
|
my_ad_caps |= PHY_AD_TX_HDX;
|
|
|
|
if (my_phy_caps & PHY_STAT_CAP_TF)
|
|
my_ad_caps |= PHY_AD_10_FDX;
|
|
|
|
if (my_phy_caps & PHY_STAT_CAP_TH)
|
|
my_ad_caps |= PHY_AD_10_HDX;
|
|
|
|
/* Update our Auto-Neg Advertisement Register */
|
|
smc_write_phy_register (dev, PHY_AD_REG, my_ad_caps);
|
|
|
|
/* Read the register back. Without this, it appears that when */
|
|
/* auto-negotiation is restarted, sometimes it isn't ready and */
|
|
/* the link does not come up. */
|
|
smc_read_phy_register(dev, PHY_AD_REG);
|
|
|
|
PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
|
|
PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
|
|
|
|
/* Restart auto-negotiation process in order to advertise my caps */
|
|
smc_write_phy_register (dev, PHY_CNTL_REG,
|
|
PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);
|
|
|
|
/* Wait for the auto-negotiation to complete. This may take from */
|
|
/* 2 to 3 seconds. */
|
|
/* Wait for the reset to complete, or time out */
|
|
timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
|
|
while (timeout--) {
|
|
|
|
status = smc_read_phy_register (dev, PHY_STAT_REG);
|
|
if (status & PHY_STAT_ANEG_ACK) {
|
|
/* auto-negotiate complete */
|
|
break;
|
|
}
|
|
|
|
mdelay(500); /* wait 500 millisecs */
|
|
|
|
/* Restart auto-negotiation if remote fault */
|
|
if (status & PHY_STAT_REM_FLT) {
|
|
printf ("%s: PHY remote fault detected\n",
|
|
SMC_DEV_NAME);
|
|
|
|
/* Restart auto-negotiation */
|
|
printf ("%s: PHY restarting auto-negotiation\n",
|
|
SMC_DEV_NAME);
|
|
smc_write_phy_register (dev, PHY_CNTL_REG,
|
|
PHY_CNTL_ANEG_EN |
|
|
PHY_CNTL_ANEG_RST |
|
|
PHY_CNTL_SPEED |
|
|
PHY_CNTL_DPLX);
|
|
}
|
|
}
|
|
|
|
if (timeout < 1) {
|
|
printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
|
|
}
|
|
|
|
/* Fail if we detected an auto-negotiate remote fault */
|
|
if (status & PHY_STAT_REM_FLT) {
|
|
printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
|
|
}
|
|
|
|
/* Re-Configure the Receive/Phy Control register */
|
|
SMC_outw (dev, RPC_DEFAULT, RPC_REG);
|
|
|
|
smc_phy_configure_exit: ;
|
|
|
|
}
|
|
#endif /* !CONFIG_SMC91111_EXT_PHY */
|
|
|
|
|
|
#if SMC_DEBUG > 2
|
|
static void print_packet( byte * buf, int length )
|
|
{
|
|
int i;
|
|
int remainder;
|
|
int lines;
|
|
|
|
printf("Packet of length %d \n", length );
|
|
|
|
#if SMC_DEBUG > 3
|
|
lines = length / 16;
|
|
remainder = length % 16;
|
|
|
|
for ( i = 0; i < lines ; i ++ ) {
|
|
int cur;
|
|
|
|
for ( cur = 0; cur < 8; cur ++ ) {
|
|
byte a, b;
|
|
|
|
a = *(buf ++ );
|
|
b = *(buf ++ );
|
|
printf("%02x%02x ", a, b );
|
|
}
|
|
printf("\n");
|
|
}
|
|
for ( i = 0; i < remainder/2 ; i++ ) {
|
|
byte a, b;
|
|
|
|
a = *(buf ++ );
|
|
b = *(buf ++ );
|
|
printf("%02x%02x ", a, b );
|
|
}
|
|
printf("\n");
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int smc91111_initialize(u8 dev_num, int base_addr)
|
|
{
|
|
struct smc91111_priv *priv;
|
|
struct eth_device *dev;
|
|
int i;
|
|
|
|
priv = malloc(sizeof(*priv));
|
|
if (!priv)
|
|
return 0;
|
|
dev = malloc(sizeof(*dev));
|
|
if (!dev) {
|
|
free(priv);
|
|
return 0;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
priv->dev_num = dev_num;
|
|
dev->priv = priv;
|
|
dev->iobase = base_addr;
|
|
|
|
swap_to(ETHERNET);
|
|
SMC_SELECT_BANK(dev, 1);
|
|
for (i = 0; i < 6; ++i)
|
|
dev->enetaddr[i] = SMC_inb(dev, (ADDR0_REG + i));
|
|
swap_to(FLASH);
|
|
|
|
dev->init = smc_init;
|
|
dev->halt = smc_halt;
|
|
dev->send = smc_send;
|
|
dev->recv = smc_rcv;
|
|
dev->write_hwaddr = smc_write_hwaddr;
|
|
sprintf(dev->name, "%s-%hu", SMC_DEV_NAME, dev_num);
|
|
|
|
eth_register(dev);
|
|
return 0;
|
|
}
|