mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Timur Tabi](/assets/img/avatar_default.png)
Most 85xx boards can be built as a 32-bit or a 36-bit. Current code sometimes displays which of these is actually built, but it's inconsistent. This is especially problematic since the "default" build for a given 85xx board can be either one, so if you don't see a message, you can't always know which size is being used. Not only that, but each board includes code that displays the message, so there is duplication. The 'bdinfo' command has been updated to display this information, so we don't need to display it at boot time. The board-specific code is deleted. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
447 lines
11 KiB
C
447 lines
11 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <hwconfig.h>
|
|
#include <pci.h>
|
|
#include <i2c.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_lbc.h>
|
|
#include <asm/mp.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <vsc7385.h>
|
|
#include <ioports.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <netdev.h>
|
|
|
|
#ifdef CONFIG_QE
|
|
|
|
#define GPIO_GETH_SW_PORT 1
|
|
#define GPIO_GETH_SW_PIN 29
|
|
#define GPIO_GETH_SW_DATA (1 << (31 - GPIO_GETH_SW_PIN))
|
|
|
|
#define GPIO_SLIC_PORT 1
|
|
#define GPIO_SLIC_PIN 30
|
|
#define GPIO_SLIC_DATA (1 << (31 - GPIO_SLIC_PIN))
|
|
|
|
|
|
#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
|
|
#define PCA_IOPORT_I2C_ADDR 0x23
|
|
#define PCA_IOPORT_OUTPUT_CMD 0x2
|
|
#define PCA_IOPORT_CFG_CMD 0x6
|
|
#define PCA_IOPORT_QE_PIN_ENABLE 0xf8
|
|
#define PCA_IOPORT_QE_TDM_ENABLE 0xf6
|
|
#endif
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* GPIO */
|
|
{1, 1, 2, 0, 0}, /* GPIO7/PB1 - LOAD_DEFAULT_N */
|
|
#if 0
|
|
{1, 8, 1, 1, 0}, /* GPIO10/PB8 - DDR_RST */
|
|
#endif
|
|
{0, 15, 1, 0, 0}, /* GPIO11/A15 - WDI */
|
|
{GPIO_GETH_SW_PORT, GPIO_GETH_SW_PIN, 1, 0, 0}, /* RST_GETH_SW_N */
|
|
{GPIO_SLIC_PORT, GPIO_SLIC_PIN, 1, 0, 0}, /* RST_SLIC_N */
|
|
|
|
#ifdef CONFIG_P1025RDB
|
|
/* QE_MUX_MDC */
|
|
{1, 19, 1, 0, 1}, /* QE_MUX_MDC */
|
|
|
|
/* QE_MUX_MDIO */
|
|
{1, 20, 3, 0, 1}, /* QE_MUX_MDIO */
|
|
|
|
/* UCC_1_MII */
|
|
{0, 23, 2, 0, 2}, /* CLK12 */
|
|
{0, 24, 2, 0, 1}, /* CLK9 */
|
|
{0, 7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0 */
|
|
{0, 9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1 */
|
|
{0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2 */
|
|
{0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
|
|
{0, 6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0 */
|
|
{0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1 */
|
|
{0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
|
|
{0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
|
|
{0, 5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
|
|
{0, 13, 1, 0, 2}, /* ENET1_TX_ER */
|
|
{0, 4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B */
|
|
{0, 8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B */
|
|
{0, 17, 2, 0, 2}, /* ENET1_CRS */
|
|
{0, 16, 2, 0, 2}, /* ENET1_COL */
|
|
|
|
/* UCC_5_RMII */
|
|
{1, 11, 2, 0, 1}, /* CLK13 */
|
|
{1, 7, 1, 0, 2}, /* ENET5_TXD0_SER5_TXD0 */
|
|
{1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1 */
|
|
{1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0 */
|
|
{1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1 */
|
|
{1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B */
|
|
{1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B */
|
|
{1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B */
|
|
#endif
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
|
|
};
|
|
#endif
|
|
|
|
struct cpld_data {
|
|
u8 cpld_rev_major;
|
|
u8 pcba_rev;
|
|
u8 wd_cfg;
|
|
u8 rst_bps_sw;
|
|
u8 load_default_n;
|
|
u8 rst_bps_wd;
|
|
u8 bypass_enable;
|
|
u8 bps_led;
|
|
u8 status_led; /* offset: 0x8 */
|
|
u8 fxo_led; /* offset: 0x9 */
|
|
u8 fxs_led; /* offset: 0xa */
|
|
u8 rev4[2];
|
|
u8 system_rst; /* offset: 0xd */
|
|
u8 bps_out;
|
|
u8 rev5[3];
|
|
u8 cpld_rev_minor;
|
|
};
|
|
|
|
#define CPLD_WD_CFG 0x03
|
|
#define CPLD_RST_BSW 0x00
|
|
#define CPLD_RST_BWD 0x00
|
|
#define CPLD_BYPASS_EN 0x03
|
|
#define CPLD_STATUS_LED 0x01
|
|
#define CPLD_FXO_LED 0x01
|
|
#define CPLD_FXS_LED 0x0F
|
|
#define CPLD_SYS_RST 0x00
|
|
|
|
void board_cpld_init(void)
|
|
{
|
|
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
|
|
|
|
out_8(&cpld_data->wd_cfg, CPLD_WD_CFG);
|
|
out_8(&cpld_data->status_led, CPLD_STATUS_LED);
|
|
out_8(&cpld_data->fxo_led, CPLD_FXO_LED);
|
|
out_8(&cpld_data->fxs_led, CPLD_FXS_LED);
|
|
out_8(&cpld_data->system_rst, CPLD_SYS_RST);
|
|
}
|
|
|
|
void board_gpio_init(void)
|
|
{
|
|
#ifdef CONFIG_QE
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
par_io_t *par_io = (par_io_t *) &(gur->qe_par_io);
|
|
|
|
/* Enable VSC7385 switch */
|
|
setbits_be32(&par_io[GPIO_GETH_SW_PORT].cpdat, GPIO_GETH_SW_DATA);
|
|
|
|
/* Enable SLIC */
|
|
setbits_be32(&par_io[GPIO_SLIC_PORT].cpdat, GPIO_SLIC_DATA);
|
|
#else
|
|
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
|
|
|
|
/*
|
|
* GPIO10 DDR Reset, open drain
|
|
* GPIO7 LOAD_DEFAULT_N Input
|
|
* GPIO11 WDI (watchdog input)
|
|
* GPIO12 Ethernet Switch Reset
|
|
* GPIO13 SLIC Reset
|
|
*/
|
|
|
|
setbits_be32(&pgpio->gpdir, 0x02130000);
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
/* init DDR3 reset signal */
|
|
setbits_be32(&pgpio->gpdir, 0x00200000);
|
|
setbits_be32(&pgpio->gpodr, 0x00200000);
|
|
clrbits_be32(&pgpio->gpdat, 0x00200000);
|
|
udelay(1000);
|
|
setbits_be32(&pgpio->gpdat, 0x00200000);
|
|
udelay(1000);
|
|
clrbits_be32(&pgpio->gpdir, 0x00200000);
|
|
#endif
|
|
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
/* reset VSC7385 Switch */
|
|
setbits_be32(&pgpio->gpdir, 0x00080000);
|
|
setbits_be32(&pgpio->gpdat, 0x00080000);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SLIC
|
|
/* reset SLIC */
|
|
setbits_be32(&pgpio->gpdir, 0x00040000);
|
|
setbits_be32(&pgpio->gpdat, 0x00040000);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
setbits_be32(&gur->pmuxcr,
|
|
(MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
|
|
clrbits_be32(&gur->sdhcdcr, SDHCDCR_CD_INV);
|
|
|
|
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
|
|
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_ENA);
|
|
|
|
board_gpio_init();
|
|
board_cpld_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u8 in, out, io_config, val;
|
|
|
|
printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME,
|
|
in_8(&cpld_data->cpld_rev_major) & 0x0F,
|
|
in_8(&cpld_data->cpld_rev_minor) & 0x0F,
|
|
in_8(&cpld_data->pcba_rev) & 0x0F);
|
|
|
|
/* Initialize i2c early for rom_loc and flash bank information */
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 ||
|
|
i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 ||
|
|
i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 3, 1, &io_config, 1) < 0) {
|
|
printf("Error reading i2c boot information!\n");
|
|
return 0; /* Don't want to hang() on this error */
|
|
}
|
|
|
|
val = (in & io_config) | (out & (~io_config));
|
|
|
|
puts("rom_loc: ");
|
|
if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SD) {
|
|
puts("sd");
|
|
#ifdef __SW_BOOT_SPI
|
|
} else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SPI) {
|
|
puts("spi");
|
|
#endif
|
|
#ifdef __SW_BOOT_NAND
|
|
} else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_NAND) {
|
|
puts("nand");
|
|
#endif
|
|
#ifdef __SW_BOOT_PCIE
|
|
} else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_PCIE) {
|
|
puts("pcie");
|
|
#endif
|
|
} else {
|
|
if (val & 0x2)
|
|
puts("nor lower bank");
|
|
else
|
|
puts("nor upper bank");
|
|
}
|
|
puts("\n");
|
|
|
|
if (val & 0x1) {
|
|
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
|
|
puts("SD/MMC : 8-bit Mode\n");
|
|
puts("eSPI : Disabled\n");
|
|
} else {
|
|
puts("SD/MMC : 4-bit Mode\n");
|
|
puts("eSPI : Enabled\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */
|
|
0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[4];
|
|
ccsr_gur_t *gur __attribute__((unused)) =
|
|
(void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
int num = 0;
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
char *tmp;
|
|
unsigned int vscfw_addr;
|
|
#endif
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
if (is_serdes_configured(SGMII_TSEC2)) {
|
|
printf("eTSEC2 is in sgmii mode.\n");
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
}
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
num++;
|
|
#endif
|
|
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
/* If a VSC7385 microcode image is present, then upload it. */
|
|
if ((tmp = getenv("vscfw_addr")) != NULL) {
|
|
vscfw_addr = simple_strtoul(tmp, NULL, 16);
|
|
printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
|
|
if (vsc7385_upload_firmware((void *) vscfw_addr,
|
|
CONFIG_VSC7385_IMAGE_SIZE))
|
|
puts("Failure uploading VSC7385 microcode.\n");
|
|
} else
|
|
puts("No address specified for VSC7385 microcode.\n");
|
|
#endif
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
|
|
#if defined(CONFIG_UEC_ETH)
|
|
/* QE0 and QE3 need to be exposed for UCC1 and UCC5 Eth mode */
|
|
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE0);
|
|
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE3);
|
|
|
|
uec_standard_init(bis);
|
|
#endif
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
#if defined(CONFIG_QE) && \
|
|
(defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB))
|
|
static void fdt_board_fixup_qe_pins(void *blob)
|
|
{
|
|
unsigned int oldbus;
|
|
u8 val8;
|
|
int node;
|
|
fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
|
|
if (hwconfig("qe")) {
|
|
/* For QE and eLBC pins multiplexing,
|
|
* there is a PCA9555 device on P1025RDB.
|
|
* It control the multiplex pins' functions,
|
|
* and setting the PCA9555 can switch the
|
|
* function between QE and eLBC.
|
|
*/
|
|
oldbus = i2c_get_bus_num();
|
|
i2c_set_bus_num(0);
|
|
if (hwconfig("tdm"))
|
|
val8 = PCA_IOPORT_QE_TDM_ENABLE;
|
|
else
|
|
val8 = PCA_IOPORT_QE_PIN_ENABLE;
|
|
i2c_write(PCA_IOPORT_I2C_ADDR, PCA_IOPORT_CFG_CMD,
|
|
1, &val8, 1);
|
|
i2c_write(PCA_IOPORT_I2C_ADDR, PCA_IOPORT_OUTPUT_CMD,
|
|
1, &val8, 1);
|
|
i2c_set_bus_num(oldbus);
|
|
/* if run QE TDM, Set ABSWP to implement
|
|
* conversion of addresses in the eLBC.
|
|
*/
|
|
if (hwconfig("tdm")) {
|
|
set_lbc_or(2, CONFIG_PMC_OR_PRELIM);
|
|
set_lbc_br(2, CONFIG_PMC_BR_PRELIM);
|
|
setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
|
|
}
|
|
} else {
|
|
node = fdt_path_offset(blob, "/qe");
|
|
if (node >= 0)
|
|
fdt_del_node(blob, node);
|
|
}
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
#ifdef CONFIG_QE
|
|
do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
|
|
sizeof("okay"), 0);
|
|
#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
|
|
fdt_board_fixup_qe_pins(blob);
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_HAS_FSL_DR_USB)
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
}
|
|
#endif
|