mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-12 07:43:22 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
754 lines
21 KiB
C
754 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Marvell PHY drivers
|
|
*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
* author Andy Fleming
|
|
*/
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <phy.h>
|
|
|
|
#define PHY_AUTONEGOTIATE_TIMEOUT 5000
|
|
|
|
#define MII_MARVELL_PHY_PAGE 22
|
|
|
|
/* 88E1011 PHY Status Register */
|
|
#define MIIM_88E1xxx_PHY_STATUS 0x11
|
|
#define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000
|
|
#define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000
|
|
#define MIIM_88E1xxx_PHYSTAT_100 0x4000
|
|
#define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000
|
|
#define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800
|
|
#define MIIM_88E1xxx_PHYSTAT_LINK 0x0400
|
|
|
|
#define MIIM_88E1xxx_PHY_SCR 0x10
|
|
#define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060
|
|
|
|
/* 88E1111 PHY LED Control Register */
|
|
#define MIIM_88E1111_PHY_LED_CONTROL 24
|
|
#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
|
|
#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
|
|
|
|
/* 88E1111 Extended PHY Specific Control Register */
|
|
#define MIIM_88E1111_PHY_EXT_CR 0x14
|
|
#define MIIM_88E1111_RX_DELAY 0x80
|
|
#define MIIM_88E1111_TX_DELAY 0x2
|
|
|
|
/* 88E1111 Extended PHY Specific Status Register */
|
|
#define MIIM_88E1111_PHY_EXT_SR 0x1b
|
|
#define MIIM_88E1111_HWCFG_MODE_MASK 0xf
|
|
#define MIIM_88E1111_HWCFG_MODE_COPPER_RGMII 0xb
|
|
#define MIIM_88E1111_HWCFG_MODE_FIBER_RGMII 0x3
|
|
#define MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK 0x4
|
|
#define MIIM_88E1111_HWCFG_MODE_COPPER_RTBI 0x9
|
|
#define MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO 0x8000
|
|
#define MIIM_88E1111_HWCFG_FIBER_COPPER_RES 0x2000
|
|
|
|
#define MIIM_88E1111_COPPER 0
|
|
#define MIIM_88E1111_FIBER 1
|
|
|
|
/* 88E1118 PHY defines */
|
|
#define MIIM_88E1118_PHY_PAGE 22
|
|
#define MIIM_88E1118_PHY_LED_PAGE 3
|
|
|
|
/* 88E1121 PHY LED Control Register */
|
|
#define MIIM_88E1121_PHY_LED_CTRL 16
|
|
#define MIIM_88E1121_PHY_LED_PAGE 3
|
|
#define MIIM_88E1121_PHY_LED_DEF 0x0030
|
|
|
|
/* 88E1121 PHY IRQ Enable/Status Register */
|
|
#define MIIM_88E1121_PHY_IRQ_EN 18
|
|
#define MIIM_88E1121_PHY_IRQ_STATUS 19
|
|
|
|
#define MIIM_88E1121_PHY_PAGE 22
|
|
|
|
/* 88E1145 Extended PHY Specific Control Register */
|
|
#define MIIM_88E1145_PHY_EXT_CR 20
|
|
#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
|
|
#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
|
|
|
|
#define MIIM_88E1145_PHY_LED_CONTROL 24
|
|
#define MIIM_88E1145_PHY_LED_DIRECT 0x4100
|
|
|
|
#define MIIM_88E1145_PHY_PAGE 29
|
|
#define MIIM_88E1145_PHY_CAL_OV 30
|
|
|
|
#define MIIM_88E1149_PHY_PAGE 29
|
|
|
|
/* 88E1310 PHY defines */
|
|
#define MIIM_88E1310_PHY_LED_CTRL 16
|
|
#define MIIM_88E1310_PHY_IRQ_EN 18
|
|
#define MIIM_88E1310_PHY_RGMII_CTRL 21
|
|
#define MIIM_88E1310_PHY_PAGE 22
|
|
|
|
/* 88E151x PHY defines */
|
|
/* Page 2 registers */
|
|
#define MIIM_88E151x_PHY_MSCR 21
|
|
#define MIIM_88E151x_RGMII_RX_DELAY BIT(5)
|
|
#define MIIM_88E151x_RGMII_TX_DELAY BIT(4)
|
|
#define MIIM_88E151x_RGMII_RXTX_DELAY (BIT(5) | BIT(4))
|
|
/* Page 3 registers */
|
|
#define MIIM_88E151x_LED_FUNC_CTRL 16
|
|
#define MIIM_88E151x_LED_FLD_SZ 4
|
|
#define MIIM_88E151x_LED0_OFFS (0 * MIIM_88E151x_LED_FLD_SZ)
|
|
#define MIIM_88E151x_LED1_OFFS (1 * MIIM_88E151x_LED_FLD_SZ)
|
|
#define MIIM_88E151x_LED0_ACT 3
|
|
#define MIIM_88E151x_LED1_100_1000_LINK 6
|
|
#define MIIM_88E151x_LED_TIMER_CTRL 18
|
|
#define MIIM_88E151x_INT_EN_OFFS 7
|
|
/* Page 18 registers */
|
|
#define MIIM_88E151x_GENERAL_CTRL 20
|
|
#define MIIM_88E151x_MODE_SGMII 1
|
|
#define MIIM_88E151x_RESET_OFFS 15
|
|
|
|
static int m88e1xxx_phy_extread(struct phy_device *phydev, int addr,
|
|
int devaddr, int regnum)
|
|
{
|
|
int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE);
|
|
int val;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, regnum);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int addr,
|
|
int devaddr, int regnum, u16 val)
|
|
{
|
|
int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, regnum, val);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Marvell 88E1011S */
|
|
static int m88e1011s_config(struct phy_device *phydev)
|
|
{
|
|
/* Reset and configure the PHY */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Parse the 88E1011's status register for speed and duplex
|
|
* information
|
|
*/
|
|
static int m88e1xxx_parse_status(struct phy_device *phydev)
|
|
{
|
|
unsigned int speed;
|
|
unsigned int mii_reg;
|
|
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS);
|
|
|
|
if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) &&
|
|
!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
|
|
int i = 0;
|
|
|
|
puts("Waiting for PHY realtime link");
|
|
while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
|
|
/* Timeout reached ? */
|
|
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
phydev->link = 0;
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if ((i++ % 1000) == 0)
|
|
putc('.');
|
|
udelay(1000);
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1xxx_PHY_STATUS);
|
|
}
|
|
puts(" done\n");
|
|
mdelay(500); /* another 500 ms (results in faster booting) */
|
|
} else {
|
|
if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK)
|
|
phydev->link = 1;
|
|
else
|
|
phydev->link = 0;
|
|
}
|
|
|
|
if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED;
|
|
|
|
switch (speed) {
|
|
case MIIM_88E1xxx_PHYSTAT_GBIT:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case MIIM_88E1xxx_PHYSTAT_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88e1011s_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return m88e1xxx_parse_status(phydev);
|
|
}
|
|
|
|
/* Marvell 88E1111S */
|
|
static int m88e1111s_config(struct phy_device *phydev)
|
|
{
|
|
int reg;
|
|
|
|
if (phy_interface_is_rgmii(phydev)) {
|
|
reg = phy_read(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR);
|
|
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
|
|
(phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) {
|
|
reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY);
|
|
} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
|
|
reg &= ~MIIM_88E1111_TX_DELAY;
|
|
reg |= MIIM_88E1111_RX_DELAY;
|
|
} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
reg &= ~MIIM_88E1111_RX_DELAY;
|
|
reg |= MIIM_88E1111_TX_DELAY;
|
|
}
|
|
|
|
phy_write(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg);
|
|
|
|
reg = phy_read(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR);
|
|
|
|
reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK);
|
|
|
|
if (reg & MIIM_88E1111_HWCFG_FIBER_COPPER_RES)
|
|
reg |= MIIM_88E1111_HWCFG_MODE_FIBER_RGMII;
|
|
else
|
|
reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RGMII;
|
|
|
|
phy_write(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR, reg);
|
|
}
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
reg = phy_read(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR);
|
|
|
|
reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK);
|
|
reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK;
|
|
reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR, reg);
|
|
}
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
|
|
reg = phy_read(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR);
|
|
reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY);
|
|
phy_write(phydev,
|
|
MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg);
|
|
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR);
|
|
reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK |
|
|
MIIM_88E1111_HWCFG_FIBER_COPPER_RES);
|
|
reg |= 0x7 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR, reg);
|
|
|
|
/* soft reset */
|
|
phy_reset(phydev);
|
|
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR);
|
|
reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK |
|
|
MIIM_88E1111_HWCFG_FIBER_COPPER_RES);
|
|
reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RTBI |
|
|
MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR, reg);
|
|
}
|
|
|
|
/* soft reset */
|
|
phy_reset(phydev);
|
|
|
|
genphy_config_aneg(phydev);
|
|
genphy_restart_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* m88e1518_phy_writebits - write bits to a register
|
|
*/
|
|
void m88e1518_phy_writebits(struct phy_device *phydev,
|
|
u8 reg_num, u16 offset, u16 len, u16 data)
|
|
{
|
|
u16 reg, mask;
|
|
|
|
if ((len + offset) >= 16)
|
|
mask = 0 - (1 << offset);
|
|
else
|
|
mask = (1 << (len + offset)) - (1 << offset);
|
|
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num);
|
|
|
|
reg &= ~mask;
|
|
reg |= data << offset;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg);
|
|
}
|
|
|
|
static int m88e1518_config(struct phy_device *phydev)
|
|
{
|
|
u16 reg;
|
|
|
|
/*
|
|
* As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512
|
|
* /88E1514 Rev A0, Errata Section 3.1
|
|
*/
|
|
|
|
/* EEE initialization */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x00ff);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
|
|
|
|
/* SGMII-to-Copper mode initialization */
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
/* Select page 18 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 18);
|
|
|
|
/* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */
|
|
m88e1518_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL,
|
|
0, 3, MIIM_88E151x_MODE_SGMII);
|
|
|
|
/* PHY reset is necessary after changing MODE[2:0] */
|
|
m88e1518_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL,
|
|
MIIM_88E151x_RESET_OFFS, 1, 1);
|
|
|
|
/* Reset page selection */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0);
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR);
|
|
|
|
reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK);
|
|
reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK;
|
|
reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_88E1111_PHY_EXT_SR, reg);
|
|
}
|
|
|
|
if (phy_interface_is_rgmii(phydev)) {
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, 2);
|
|
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E151x_PHY_MSCR);
|
|
reg &= ~MIIM_88E151x_RGMII_RXTX_DELAY;
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
reg |= MIIM_88E151x_RGMII_RXTX_DELAY;
|
|
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
reg |= MIIM_88E151x_RGMII_RX_DELAY;
|
|
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
reg |= MIIM_88E151x_RGMII_TX_DELAY;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E151x_PHY_MSCR, reg);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, 0);
|
|
}
|
|
|
|
/* soft reset */
|
|
phy_reset(phydev);
|
|
|
|
genphy_config_aneg(phydev);
|
|
genphy_restart_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Marvell 88E1510 */
|
|
static int m88e1510_config(struct phy_device *phydev)
|
|
{
|
|
/* Select page 3 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE,
|
|
MIIM_88E1118_PHY_LED_PAGE);
|
|
|
|
/* Enable INTn output on LED[2] */
|
|
m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_TIMER_CTRL,
|
|
MIIM_88E151x_INT_EN_OFFS, 1, 1);
|
|
|
|
/* Configure LEDs */
|
|
/* LED[0]:0011 (ACT) */
|
|
m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_FUNC_CTRL,
|
|
MIIM_88E151x_LED0_OFFS, MIIM_88E151x_LED_FLD_SZ,
|
|
MIIM_88E151x_LED0_ACT);
|
|
/* LED[1]:0110 (LINK 100/1000 Mbps) */
|
|
m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_FUNC_CTRL,
|
|
MIIM_88E151x_LED1_OFFS, MIIM_88E151x_LED_FLD_SZ,
|
|
MIIM_88E151x_LED1_100_1000_LINK);
|
|
|
|
/* Reset page selection */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0);
|
|
|
|
return m88e1518_config(phydev);
|
|
}
|
|
|
|
/* Marvell 88E1118 */
|
|
static int m88e1118_config(struct phy_device *phydev)
|
|
{
|
|
/* Change Page Number */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002);
|
|
/* Delay RGMII TX and RX */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070);
|
|
/* Change Page Number */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003);
|
|
/* Adjust LED control */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e);
|
|
/* Change Page Number */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int m88e1118_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Change Page Number */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return m88e1xxx_parse_status(phydev);
|
|
}
|
|
|
|
/* Marvell 88E1121R */
|
|
static int m88e1121_config(struct phy_device *phydev)
|
|
{
|
|
int pg;
|
|
|
|
/* Configure the PHY */
|
|
genphy_config_aneg(phydev);
|
|
|
|
/* Switch the page to access the led register */
|
|
pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE,
|
|
MIIM_88E1121_PHY_LED_PAGE);
|
|
/* Configure leds */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL,
|
|
MIIM_88E1121_PHY_LED_DEF);
|
|
/* Restore the page pointer */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg);
|
|
|
|
/* Disable IRQs and de-assert interrupt */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0);
|
|
phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Marvell 88E1145 */
|
|
static int m88e1145_config(struct phy_device *phydev)
|
|
{
|
|
int reg;
|
|
|
|
/* Errata E0, E1 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR,
|
|
MIIM_88E1xxx_PHY_MDI_X_AUTO);
|
|
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
reg |= MIIM_M88E1145_RGMII_RX_DELAY |
|
|
MIIM_M88E1145_RGMII_TX_DELAY;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
/* soft reset */
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
|
|
reg |= BMCR_RESET;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88e1145_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL,
|
|
MIIM_88E1145_PHY_LED_DIRECT);
|
|
return m88e1xxx_parse_status(phydev);
|
|
}
|
|
|
|
/* Marvell 88E1149S */
|
|
static int m88e1149_config(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
phy_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Marvell 88E1310 */
|
|
static int m88e1310_config(struct phy_device *phydev)
|
|
{
|
|
u16 reg;
|
|
|
|
/* LED link and activity */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0003);
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_LED_CTRL);
|
|
reg = (reg & ~0xf) | 0x1;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_LED_CTRL, reg);
|
|
|
|
/* Set LED2/INT to INT mode, low active */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0003);
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_IRQ_EN);
|
|
reg = (reg & 0x77ff) | 0x0880;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_IRQ_EN, reg);
|
|
|
|
/* Set RGMII delay */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0002);
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_RGMII_CTRL);
|
|
reg |= 0x0030;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_RGMII_CTRL, reg);
|
|
|
|
/* Ensure to return to page 0 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0000);
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int m88e1680_config(struct phy_device *phydev)
|
|
{
|
|
/*
|
|
* As per Marvell Release Notes - Alaska V 88E1680 Rev A2
|
|
* Errata Section 4.1
|
|
*/
|
|
u16 reg;
|
|
int res;
|
|
|
|
/* Matrix LED mode (not neede if single LED mode is used */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0004);
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, 27);
|
|
reg |= (1 << 5);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 27, reg);
|
|
|
|
/* QSGMII TX amplitude change */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x00fd);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 8, 0x0b53);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 7, 0x200d);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
|
|
|
|
/* EEE initialization */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x00ff);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xb030);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x215c);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00fc);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 24, 0x888c);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 25, 0x888c);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x9140);
|
|
|
|
res = genphy_config_aneg(phydev);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
/* soft reset */
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
|
|
reg |= BMCR_RESET;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver M88E1011S_driver = {
|
|
.name = "Marvell 88E1011S",
|
|
.uid = 0x1410c60,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1011s_config,
|
|
.startup = &m88e1011s_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1111S_driver = {
|
|
.name = "Marvell 88E1111S",
|
|
.uid = 0x1410cc0,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1111s_config,
|
|
.startup = &m88e1011s_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1118_driver = {
|
|
.name = "Marvell 88E1118",
|
|
.uid = 0x1410e10,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1118_config,
|
|
.startup = &m88e1118_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1118R_driver = {
|
|
.name = "Marvell 88E1118R",
|
|
.uid = 0x1410e40,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1118_config,
|
|
.startup = &m88e1118_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1121R_driver = {
|
|
.name = "Marvell 88E1121R",
|
|
.uid = 0x1410cb0,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1121_config,
|
|
.startup = &genphy_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1145_driver = {
|
|
.name = "Marvell 88E1145",
|
|
.uid = 0x1410cd0,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1145_config,
|
|
.startup = &m88e1145_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1149S_driver = {
|
|
.name = "Marvell 88E1149S",
|
|
.uid = 0x1410ca0,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1149_config,
|
|
.startup = &m88e1011s_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1510_driver = {
|
|
.name = "Marvell 88E1510",
|
|
.uid = 0x1410dd0,
|
|
.mask = 0xfffffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1510_config,
|
|
.startup = &m88e1011s_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
.readext = &m88e1xxx_phy_extread,
|
|
.writeext = &m88e1xxx_phy_extwrite,
|
|
};
|
|
|
|
/*
|
|
* This supports:
|
|
* 88E1518, uid 0x1410dd1
|
|
* 88E1512, uid 0x1410dd4
|
|
*/
|
|
static struct phy_driver M88E1518_driver = {
|
|
.name = "Marvell 88E1518",
|
|
.uid = 0x1410dd0,
|
|
.mask = 0xffffffa,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1518_config,
|
|
.startup = &m88e1011s_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
.readext = &m88e1xxx_phy_extread,
|
|
.writeext = &m88e1xxx_phy_extwrite,
|
|
};
|
|
|
|
static struct phy_driver M88E1310_driver = {
|
|
.name = "Marvell 88E1310",
|
|
.uid = 0x01410e90,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1310_config,
|
|
.startup = &m88e1011s_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver M88E1680_driver = {
|
|
.name = "Marvell 88E1680",
|
|
.uid = 0x1410ed0,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &m88e1680_config,
|
|
.startup = &genphy_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_marvell_init(void)
|
|
{
|
|
phy_register(&M88E1310_driver);
|
|
phy_register(&M88E1149S_driver);
|
|
phy_register(&M88E1145_driver);
|
|
phy_register(&M88E1121R_driver);
|
|
phy_register(&M88E1118_driver);
|
|
phy_register(&M88E1118R_driver);
|
|
phy_register(&M88E1111S_driver);
|
|
phy_register(&M88E1011S_driver);
|
|
phy_register(&M88E1510_driver);
|
|
phy_register(&M88E1518_driver);
|
|
phy_register(&M88E1680_driver);
|
|
|
|
return 0;
|
|
}
|