mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-21 04:00:25 +09:00
12df71cd74
Switch from using the high priority DMSC transmit message queue used by the secure R5 MCU island boot context to the low priority message queue. While the change in priority is irrelevant for the current boot architecture it however gives us access to a deeper message queue that will allow us to buffer more messages. This is an important aspect when sending several messages without requesting and waiting for a response in a row which is a communication scheme used during core shutdown for example. See AM654 TISCI User Guide for additional details. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
140 lines
3.1 KiB
Plaintext
140 lines
3.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-am654.dtsi"
|
|
#include "k3-am654-base-board-u-boot.dtsi"
|
|
#include "k3-am654-base-board-ddr4-1600MHz.dtsi"
|
|
#include "k3-am654-ddr.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,am654-evm", "ti,am654";
|
|
model = "Texas Instruments AM654 R5 Base Board";
|
|
|
|
aliases {
|
|
serial0 = &wkup_uart0;
|
|
serial2 = &main_uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
tick-timer = &timer1;
|
|
};
|
|
|
|
aliases {
|
|
remoteproc0 = &sysctrler;
|
|
remoteproc1 = &a53_0;
|
|
};
|
|
|
|
a53_0: a53@0 {
|
|
compatible = "ti,am654-rproc";
|
|
reg = <0x0 0x00a90000 0x0 0x10>;
|
|
power-domains = <&k3_pds 61>,
|
|
<&k3_pds 202>;
|
|
resets = <&k3_reset 202 0>;
|
|
assigned-clocks = <&k3_clks 202 0>;
|
|
assigned-clock-rates = <800000000>;
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-proc-id = <32>;
|
|
ti,sci-host-id = <10>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
vtt_supply: vtt_supply {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "vtt";
|
|
regulator-min-microvolt = <0>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
|
|
states = <0 0x0 3300000 0x1>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&cbass_main {
|
|
timer1: timer@40400000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x40400000 0x0 0x80>;
|
|
ti,timer-alwon;
|
|
clock-frequency = <25000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
&cbass_mcu {
|
|
mcu_secproxy: secproxy@28380000 {
|
|
compatible = "ti,am654-secure-proxy";
|
|
reg = <0x0 0x2a380000 0x0 0x80000>,
|
|
<0x0 0x2a400000 0x0 0x80000>,
|
|
<0x0 0x2a480000 0x0 0x80000>;
|
|
reg-names = "rt", "scfg", "target_data";
|
|
#mbox-cells = <1>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&cbass_wakeup {
|
|
sysctrler: sysctrler {
|
|
compatible = "ti,am654-system-controller";
|
|
mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
|
|
mbox-names = "tx", "rx";
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
wkup_gpio0: wkup_gpio0@42110000 {
|
|
compatible = "ti,k2g-gpio", "ti,keystone-gpio";
|
|
reg = <0x42110000 0x100>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ti,ngpio = <56>;
|
|
ti,davinci-gpio-unbanked = <0>;
|
|
clocks = <&k3_clks 59 0>;
|
|
clock-names = "gpio";
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
};
|
|
|
|
&dmsc {
|
|
mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
|
|
mbox-names = "tx", "rx", "notify";
|
|
ti,host-id = <4>;
|
|
ti,secure-host;
|
|
};
|
|
|
|
&wkup_uart0 {
|
|
u-boot,dm-spl;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wkup_uart0_pins_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wkup_pmx0 {
|
|
u-boot,dm-spl;
|
|
wkup_uart0_pins_default: wkup_uart0_pins_default {
|
|
pinctrl-single,pins = <
|
|
AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT | MUX_MODE0) /* (AB1) WKUP_UART0_RXD */
|
|
AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT | MUX_MODE0) /* (AB5) WKUP_UART0_TXD */
|
|
AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT | MUX_MODE1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
|
|
AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT | MUX_MODE1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
|
|
>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
wkup_vtt_pins_default: wkup_vtt_pins_default {
|
|
pinctrl-single,pins = <
|
|
AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP | MUX_MODE7) /* WKUP_GPIO0_28 */
|
|
>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&memorycontroller {
|
|
vtt-supply = <&vtt_supply>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wkup_vtt_pins_default>;
|
|
};
|