mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Mario Six](/assets/img/avatar_default.png)
The MPC83xx DM timer driver disables arch.pciexp*_clk, and uses clk_get_rate instead. But the legacy MPC83xx PCIe driver still uses arch.pciexp*_clk for the clock. Hence, read the PCIe clock from the registers in the legacy MPC83xx PCIe driver. Signed-off-by: Mario Six <mario.six@gdsys.cc>
368 lines
9.4 KiB
C
368 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2008-2009 MontaVista Software, Inc.
|
|
*
|
|
* Authors: Tony Li <tony.li@freescale.com>
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <mpc83xx.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define PCIE_MAX_BUSES 2
|
|
|
|
static struct {
|
|
u32 base;
|
|
u32 size;
|
|
} mpc83xx_pcie_cfg_space[] = {
|
|
{
|
|
.base = CONFIG_SYS_PCIE1_CFG_BASE,
|
|
.size = CONFIG_SYS_PCIE1_CFG_SIZE,
|
|
},
|
|
#if defined(CONFIG_SYS_PCIE2_CFG_BASE) && defined(CONFIG_SYS_PCIE2_CFG_SIZE)
|
|
{
|
|
.base = CONFIG_SYS_PCIE2_CFG_BASE,
|
|
.size = CONFIG_SYS_PCIE2_CFG_SIZE,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
|
|
|
|
/* private structure for mpc83xx pcie hose */
|
|
static struct mpc83xx_pcie_priv {
|
|
u8 index;
|
|
} pcie_priv[PCIE_MAX_BUSES] = {
|
|
{
|
|
/* pcie controller 1 */
|
|
.index = 0,
|
|
},
|
|
{
|
|
/* pcie controller 2 */
|
|
.index = 1,
|
|
},
|
|
};
|
|
|
|
static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
int bus = PCI_BUS(dev) - hose->first_busno;
|
|
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
struct mpc83xx_pcie_priv *pcie_priv = hose->priv_data;
|
|
pex83xx_t *pex = &immr->pciexp[pcie_priv->index];
|
|
struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0];
|
|
u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev);
|
|
u32 dev_base = bus << 24 | devfn << 16;
|
|
|
|
if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK)
|
|
return -1;
|
|
/*
|
|
* Workaround for the HW bug: for Type 0 configure transactions the
|
|
* PCI-E controller does not check the device number bits and just
|
|
* assumes that the device number bits are 0.
|
|
*/
|
|
if (devfn & 0xf8)
|
|
return -1;
|
|
|
|
out_le32(&out_win->tarl, dev_base);
|
|
return 0;
|
|
}
|
|
|
|
#define cfg_read(val, addr, type, op) \
|
|
do { *val = op((type)(addr)); } while (0)
|
|
#define cfg_write(val, addr, type, op) \
|
|
do { op((type *)(addr), (val)); } while (0)
|
|
|
|
#define cfg_read_err(val) do { *val = -1; } while (0)
|
|
#define cfg_write_err(val) do { } while (0)
|
|
|
|
#define PCIE_OP(rw, size, type, op) \
|
|
static int pcie_##rw##_config_##size(struct pci_controller *hose, \
|
|
pci_dev_t dev, int offset, \
|
|
type val) \
|
|
{ \
|
|
int ret; \
|
|
\
|
|
ret = mpc83xx_pcie_remap_cfg(hose, dev); \
|
|
if (ret) { \
|
|
cfg_##rw##_err(val); \
|
|
return ret; \
|
|
} \
|
|
cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op); \
|
|
return 0; \
|
|
}
|
|
|
|
PCIE_OP(read, byte, u8 *, in_8)
|
|
PCIE_OP(read, word, u16 *, in_le16)
|
|
PCIE_OP(read, dword, u32 *, in_le32)
|
|
PCIE_OP(write, byte, u8, out_8)
|
|
PCIE_OP(write, word, u16, out_le16)
|
|
PCIE_OP(write, dword, u32, out_le32)
|
|
|
|
static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
|
|
u8 link)
|
|
{
|
|
extern void disable_addr_trans(void); /* start.S */
|
|
static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
|
|
struct pci_controller *hose = &pcie_hose[bus];
|
|
int i;
|
|
|
|
/*
|
|
* There are no spare BATs to remap all PCI-E windows for U-Boot, so
|
|
* disable translations. In general, this is not great solution, and
|
|
* that's why we don't register PCI-E hoses by default.
|
|
*/
|
|
disable_addr_trans();
|
|
|
|
for (i = 0; i < 2; i++, reg++) {
|
|
if (reg->size == 0)
|
|
break;
|
|
|
|
hose->regions[i] = *reg;
|
|
hose->region_count++;
|
|
}
|
|
|
|
i = hose->region_count++;
|
|
hose->regions[i].bus_start = 0;
|
|
hose->regions[i].phys_start = 0;
|
|
hose->regions[i].size = gd->ram_size;
|
|
hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
|
|
|
|
i = hose->region_count++;
|
|
hose->regions[i].bus_start = CONFIG_SYS_IMMR;
|
|
hose->regions[i].phys_start = CONFIG_SYS_IMMR;
|
|
hose->regions[i].size = 0x100000;
|
|
hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
|
|
|
|
hose->first_busno = pci_last_busno() + 1;
|
|
hose->last_busno = 0xff;
|
|
|
|
hose->cfg_addr = (unsigned int *)mpc83xx_pcie_cfg_space[bus].base;
|
|
|
|
hose->priv_data = &pcie_priv[bus];
|
|
|
|
pci_set_ops(hose,
|
|
pcie_read_config_byte,
|
|
pcie_read_config_word,
|
|
pcie_read_config_dword,
|
|
pcie_write_config_byte,
|
|
pcie_write_config_word,
|
|
pcie_write_config_dword);
|
|
|
|
if (!link)
|
|
hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK;
|
|
|
|
pci_register_hose(hose);
|
|
|
|
#ifdef CONFIG_PCI_SCAN_SHOW
|
|
printf("PCI: Bus Dev VenId DevId Class Int\n");
|
|
#endif
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|
|
|
|
#else
|
|
|
|
static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
|
|
u8 link) {}
|
|
|
|
#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
|
|
|
|
int get_pcie_clk(int index)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 pci_sync_in;
|
|
u8 spmf;
|
|
u8 clkin_div;
|
|
u32 sccr;
|
|
u32 csb_clk;
|
|
u32 testval;
|
|
|
|
clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
|
|
sccr = im->clk.sccr;
|
|
pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div);
|
|
spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
|
|
csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
|
|
|
|
if (index)
|
|
testval = (sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT;
|
|
else
|
|
testval = (sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT;
|
|
|
|
switch (testval) {
|
|
case 0:
|
|
return 0;
|
|
case 1:
|
|
return csb_clk;
|
|
case 2:
|
|
return csb_clk / 2;
|
|
case 3:
|
|
return csb_clk / 3;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
|
|
{
|
|
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
pex83xx_t *pex = &immr->pciexp[bus];
|
|
struct pex_outbound_window *out_win;
|
|
struct pex_inbound_window *in_win;
|
|
void *hose_cfg_base;
|
|
unsigned int ram_sz;
|
|
unsigned int barl;
|
|
unsigned int tar;
|
|
u16 reg16;
|
|
int i;
|
|
|
|
/* Enable pex csb bridge inbound & outbound transactions */
|
|
out_le32(&pex->bridge.pex_csb_ctrl,
|
|
in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE |
|
|
PEX_CSB_CTRL_IBPIOE);
|
|
|
|
/* Enable bridge outbound */
|
|
out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE |
|
|
PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE |
|
|
PEX_CSB_OBCTRL_CFGWE);
|
|
|
|
out_win = &pex->bridge.pex_outbound_win[0];
|
|
out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
|
|
mpc83xx_pcie_cfg_space[bus].size);
|
|
out_le32(&out_win->bar, mpc83xx_pcie_cfg_space[bus].base);
|
|
out_le32(&out_win->tarl, 0);
|
|
out_le32(&out_win->tarh, 0);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
u32 ar;
|
|
|
|
if (reg[i].size == 0)
|
|
break;
|
|
|
|
out_win = &pex->bridge.pex_outbound_win[i + 1];
|
|
out_le32(&out_win->bar, reg[i].phys_start);
|
|
out_le32(&out_win->tarl, reg[i].bus_start);
|
|
out_le32(&out_win->tarh, 0);
|
|
ar = PEX_OWAR_EN | (reg[i].size & PEX_OWAR_SIZE);
|
|
if (reg[i].flags & PCI_REGION_IO)
|
|
ar |= PEX_OWAR_TYPE_IO;
|
|
else
|
|
ar |= PEX_OWAR_TYPE_MEM;
|
|
out_le32(&out_win->ar, ar);
|
|
}
|
|
|
|
out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE);
|
|
|
|
ram_sz = gd->ram_size;
|
|
barl = 0;
|
|
tar = 0;
|
|
i = 0;
|
|
while (ram_sz > 0) {
|
|
in_win = &pex->bridge.pex_inbound_win[i];
|
|
out_le32(&in_win->barl, barl);
|
|
out_le32(&in_win->barh, 0x0);
|
|
out_le32(&in_win->tar, tar);
|
|
if (ram_sz >= 0x10000000) {
|
|
/* The maxium windows size is 256M */
|
|
out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
|
|
PEX_IWAR_TYPE_PF | 0x0FFFF000);
|
|
barl += 0x10000000;
|
|
tar += 0x10000000;
|
|
ram_sz -= 0x10000000;
|
|
} else {
|
|
/* The UM is not clear here.
|
|
* So, round up to even Mb boundary */
|
|
|
|
ram_sz = ram_sz >> (20 +
|
|
((ram_sz & 0xFFFFF) ? 1 : 0));
|
|
if (!(ram_sz % 2))
|
|
ram_sz -= 1;
|
|
out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
|
|
PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000);
|
|
ram_sz = 0;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
in_win = &pex->bridge.pex_inbound_win[i];
|
|
out_le32(&in_win->barl, CONFIG_SYS_IMMR);
|
|
out_le32(&in_win->barh, 0);
|
|
out_le32(&in_win->tar, CONFIG_SYS_IMMR);
|
|
out_le32(&in_win->ar, PEX_IWAR_EN |
|
|
PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M);
|
|
|
|
/* Enable the host virtual INTX interrupts */
|
|
out_le32(&pex->bridge.pex_int_axi_misc_enb,
|
|
in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0);
|
|
|
|
/* Hose configure header is memory-mapped */
|
|
hose_cfg_base = (void *)pex;
|
|
|
|
/* Configure the PCIE controller core clock ratio */
|
|
out_le32(hose_cfg_base + PEX_GCLK_RATIO,
|
|
((get_pcie_clk(bus) / 1000000) * 16) / 333);
|
|
udelay(1000000);
|
|
|
|
/* Do Type 1 bridge configuration */
|
|
out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0);
|
|
out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1);
|
|
out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255);
|
|
|
|
/*
|
|
* Write to Command register
|
|
*/
|
|
reg16 = in_le16(hose_cfg_base + PCI_COMMAND);
|
|
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO |
|
|
PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
|
|
out_le16(hose_cfg_base + PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
out_le16(hose_cfg_base + PCI_STATUS, 0xffff);
|
|
out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80);
|
|
out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08);
|
|
|
|
printf("PCIE%d: ", bus);
|
|
|
|
#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */
|
|
#define PCI_LTSSM_L0 0x16 /* L0 state */
|
|
reg16 = in_le16(hose_cfg_base + PCI_LTSSM);
|
|
if (reg16 >= PCI_LTSSM_L0)
|
|
printf("link\n");
|
|
else
|
|
printf("No link\n");
|
|
|
|
mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0);
|
|
}
|
|
|
|
/*
|
|
* The caller must have already set SCCR, SERDES and the PCIE_LAW BARs
|
|
* must have been set to cover all of the requested regions.
|
|
*/
|
|
void mpc83xx_pcie_init(int num_buses, struct pci_region **reg)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Release PCI RST Output signal.
|
|
* Power on to RST high must be at least 100 ms as per PCI spec.
|
|
* On warm boots only 1 ms is required, but we play it safe.
|
|
*/
|
|
udelay(100000);
|
|
|
|
if (num_buses > ARRAY_SIZE(mpc83xx_pcie_cfg_space)) {
|
|
printf("Second PCIE host contoller not configured!\n");
|
|
num_buses = ARRAY_SIZE(mpc83xx_pcie_cfg_space);
|
|
}
|
|
|
|
for (i = 0; i < num_buses; i++)
|
|
mpc83xx_pcie_init_bus(i, reg[i]);
|
|
}
|