u-boot-brain/drivers/Kconfig
Jens Wiklander 9ff4a31175 Add UCLASS_TEE for Trusted Execution Environment
Adds a uclass to interface with a TEE (Trusted Execution Environment).

A TEE driver is a driver that interfaces with a trusted OS running in
some secure environment, for example, TrustZone on ARM cpus, or a
separate secure co-processor etc.

The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.

The over all design is based on the TEE subsystem in the Linux kernel,
tailored for U-Boot.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00

130 lines
2.2 KiB
Plaintext

menu "Device Drivers"
source "drivers/core/Kconfig"
# types of drivers sorted in alphabetical order
source "drivers/adc/Kconfig"
source "drivers/ata/Kconfig"
source "drivers/axi/Kconfig"
source "drivers/block/Kconfig"
source "drivers/bootcount/Kconfig"
source "drivers/clk/Kconfig"
source "drivers/cpu/Kconfig"
source "drivers/crypto/Kconfig"
source "drivers/ddr/Kconfig"
source "drivers/demo/Kconfig"
source "drivers/board/Kconfig"
source "drivers/ddr/fsl/Kconfig"
source "drivers/dfu/Kconfig"
source "drivers/dma/Kconfig"
source "drivers/fastboot/Kconfig"
source "drivers/firmware/Kconfig"
source "drivers/fpga/Kconfig"
source "drivers/gpio/Kconfig"
source "drivers/i2c/Kconfig"
source "drivers/input/Kconfig"
source "drivers/led/Kconfig"
source "drivers/mailbox/Kconfig"
source "drivers/memory/Kconfig"
source "drivers/misc/Kconfig"
source "drivers/mmc/Kconfig"
source "drivers/mtd/Kconfig"
source "drivers/net/Kconfig"
source "drivers/nvme/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/phy/Kconfig"
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/marvell/Kconfig"
source "drivers/pinctrl/Kconfig"
source "drivers/power/Kconfig"
source "drivers/pwm/Kconfig"
source "drivers/qe/Kconfig"
source "drivers/ram/Kconfig"
source "drivers/remoteproc/Kconfig"
source "drivers/reset/Kconfig"
source "drivers/rtc/Kconfig"
source "drivers/scsi/Kconfig"
source "drivers/serial/Kconfig"
source "drivers/smem/Kconfig"
source "drivers/sound/Kconfig"
source "drivers/spi/Kconfig"
source "drivers/spmi/Kconfig"
source "drivers/sysreset/Kconfig"
source "drivers/tee/Kconfig"
source "drivers/thermal/Kconfig"
source "drivers/timer/Kconfig"
source "drivers/tpm/Kconfig"
source "drivers/usb/Kconfig"
source "drivers/video/Kconfig"
source "drivers/w1/Kconfig"
source "drivers/w1-eeprom/Kconfig"
source "drivers/watchdog/Kconfig"
config PHYS_TO_BUS
bool "Custom physical to bus address mapping"
help
Some SoCs use a different address map for CPU physical addresses and
peripheral DMA master accesses. If yours does, select this option in
your platform's Kconfig, and implement the appropriate mapping
functions in your platform's support code.
endmenu